Please help with mtty.exe!!!!!!!!!

lesswork · #1 (**permalink**) 01-06-2009, 11:02 AM

well i cant seem to get the mtty.exe to run properly. I boot the ppc and open the mtty.exe. When i run the first command rtask a it boots and then says sucess. But then when i try to run any other commands my cpu keyboard wont work. Its like as soon as first boot works, it closes my usb keyboard port. I think there may be a driver needed i,m missing. I downloaded htc diagnostic port driver from forum but cant figure out where or how to install on my cpu. Plz any help out there. I,m sure there is an easy fix so i can superCid my ppc.

lesswork · #2 (**permalink**) 01-06-2009, 03:15 PM

Nobody has an idea or the guru,s are not on till tonight? i,m so close to accomplishing what i need to. Any brainstorming out there?

lesswork · #3 (**permalink**) 01-06-2009, 04:15 PM

This is as far as i can get before i lose the keyboard funtions and cannot type any more commands!

Cmd>rtask a
Enter Radio Bootloader
POWER ON PMIC VREG_USB : SUCCESS!

Thats as far as i get , pls any suggestions!!!!!!

lesswork · #4 (**permalink**) 01-06-2009, 04:28 PM

Then if i copy and paste the next command echo_on (because i cant type it) then i get this next message:

Cmd>rtask a
Enter Radio Bootloader
POWER ON PMIC VREG_USB : SUCCESS!
Cmd> echo_on Invalid cmd!...

Any idea?

SeanNoxious · #5 (**permalink**) 02-23-2010, 01:00 AM

Quote:

Originally Posted by lesswork

Then if i copy and paste the next command echo_on (because i cant type it) then i get this next message:

Cmd>rtask a
Enter Radio Bootloader
POWER ON PMIC VREG_USB : SUCCESS!
Cmd> echo_on Invalid cmd!...

Any idea?

Don't mean to thread jack but it seems better than starting a new thread for such a related problem. When i type this first command
"Cmd>rtask a
Enter Radio Bootloader"
I don't get the echo
"POWER ON PMIC VREG_USB : SUCCESS!"
Is that because the echo on command is being typed in later? Or is there an error other than that i get all the way down to rtask c without any errors or problems. Anybody have any ideas as to what might have gone wrong?

joop135 · #6 (**permalink**) 02-04-2009, 12:32 AM

Having same problem.... anyone got any idea..????.. trying to update to metro

hykq · #7 (**permalink**) 02-04-2009, 12:51 AM

your KB is just OK. When you issue 'rtask a' command, the PPC get into radio boot loader, the MTTY won't display any character you pressed until you type echo_on.

joop135 · #8 (**permalink**) 02-04-2009, 02:31 AM

right but it freezes up and can only copy paste and this is what comes up

echo_on Invalid cmd!...

joop135 · #9 (**permalink**) 02-04-2009, 02:32 AM

mogul using bootloader 2.40
mtty 1.42
radio 3.35

joop135 · #10 (**permalink**) 02-05-2009, 12:27 PM

I GOT IT!!!!

trick is DONT copy and paste. just type even though nothing comes up on screen and press enter...