![]() |
Problem after running ppst.exe
So after running ppst.exe I've had a slight problem, admittedly I did it while driving all from my phone so I'm sure I messed something up along the way.
Anyways, the problem is now I'm stuck in 'Digital Roaming' and get an "Error: 67" message saying my password is wrong? Where do I get my password and how do I fix this if it actually is the problem? If not, whats my next step, I've tried a soft & hard reset to no avail. Sorry, I'm at work and want to do this quick, i would have also done a little better searching. Thanks in advance! Update: Problem Resolved! I had to soft reset before customizations ran after flashing the rom. Thanks for the help guys! |
Re: Problem after running ppst.exe
Re-Flash with a Official Stock ROM. If you are with Sprint then Flash the new ROM. The radio will reflash in the process. Otherwise use the newest .exe from your carrier....
I have the same problem when I run the ppst , unless it's the patched version on here. If you reflash you should be fine. Hard reset doesn't touch the radio... Take care and double check prior to flashing anything especially if it relates to the radio.... Hope that helps.. |
Re: Problem after running ppst.exe
Quote:
As far as I know, there is a PPST.exe for Altell and now two for Sprint; one with the leaked rom and one with the official rom. If you are not an Altell or Sprint subscriber, running PPST.exe will probably result in you needing to call your carrier support so they can fix your data connection. Best regards, -boggsie |
Re: Problem after running ppst.exe
Quote:
I think he should be able to fix it by re-flashing a stock rom from his carrier (Which remains unknown). I have the same problem everytime I run the ppst from sprint unless it runs during customization or I use the patched one. Re-flashing to either the leaked gps rom or the new one from yesterday always fixes it for me. But I stayed within my carriers ppst. |
Re: Problem after running ppst.exe
Quote:
I can't speak with experince on this situation, as I've never personally had it happen to me. In the early stages of the stickied GPS Fix thread, there were a few folks who were VZW subscribers who had flashed PPST.exe and, while I can't recally everything that they tried to resolve the issue, I can say that there were folks who had to resort to a support call to get their data connection fixed. I think that your suggestion has merit, though, because it gives this person something to do while waiting on hold and it might resolve the issue without talking to support. Best regards, -boggsie |
Re: Problem after running ppst.exe
Sorry guys, I'm on Sprint. I just reflashed with the new official leaked roma nd I'm still in Digital Roaming, however the Error 67 bubble hasn't popped up yet?
|
Re: Problem after running ppst.exe
Update: when I look in device information I don't think my typical username is there... this probably the problem?
|
Re: Problem after running ppst.exe
Quote:
If this confirms your situation, then I'm at a loss (no big surprise there). I would suggest the following: Hard Reset --- hold down the green button + red button + insert the stylus in reset hole --- the screen will prompt to press the key --- after the hard reset, the screen will ask you to press the send key Instead of pressing the send key, take out your battery for 30 seconds re-insert the battery and press the power (top) button see what happens after the customizations run soft reset (the stylus in the reset hole) Best regards, -boggsie |
Re: Problem after running ppst.exe
on mine i dont even have a username or password and i have flashed many times why dont u try that c what happens
|
Re: Problem after running ppst.exe
Quote:
|
| All times are GMT -4. The time now is 02:54 PM. |
Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com