EVDO solution for Cloned 6800/6900!!!!!
 

thx to pzztgotbagz..ive just posted this solution for using full evdo on a cloned mogul or touch..
usually if u clone a phone, the only internet accesible would be 1x and its pretty slow..thats because your evdo
wont authenticate...pzztgotbagz found the solution..



will need someone else to test this. This was tested using an esn from an active mogul and entering the information on a cloned touch.
1. Change ESN from mogul to touch.
2. Enter mdn and msid via ##msl#.
3. Change all information in M.IP default and M.IP customer to match Mogul.
4. Not needed
5. Open Qpst Version 2.7 build 215
6.Go to Qpst Start Clients EFS explorer Enter MSL
7.Exit efs explorer
8. now open QXDM version 3.09.19
9. Once in QXDM go to NV ITEMs then to hdr_an_auth_passwd_long ITEM 01192 located in the Data Category.
10.Write down all the hex vales skip the first start with password 0-15
11. Now go to QPST service programming
12.Click read from phone
13.Then go to M IP Profile
14.click profile 0
15.then go to AAA shared secret and enter the hex values u wrote down do not use 0x00 just 00 and so on
16.now click ok
17.then click write to phone
18.then exit
19.now go to phone and enter ##778#
20.now go to edit
21.then go to M.IP default profile
22.make sure HA shared secret says secret in lowercase( when i did step #22 my evdo didnt authenticate, i just left it blank)
23.click menu ok then reset

to test if your evdo is authenticated.. clockcycle mentioned just hitting ##33284# and selecting hdr..all the way at the bottom itll tell u if evdo is authenticated..
if it says failed..ur internet wont work...repeat the steps!

because it works for me!!!!!!!!!!!!!!!!!!!!!!!!!!! ENJOY :mrgreen:

heres a link to qxdm
http://download.hyperfileshare.com/d...d=a30c33ba&s=2

Re: EVDO solution for Cloned 6800/6900!!!!!
 

Now i will take credit for this being that im a noob sometimes myself.

how to use QXDM..(windows xp compatible) i couldnt get it 2 work with vista
1. download and run qxdm.
2. place phone in ##diag mode. ##3424# for sprint users
3.connect to computer open qxdm and select options.
4.when options is selected. seect communications.
5.whatever com port that your phone is hooked to use it for qxdm.
6.connected
7.instead of seeing nv items you will see nv browser.
8.select. it will take you to a window.
9.look on the left hand side where it says the item #'s and go to item #01192
10.follow the rest of the instructions at the top.

Re: EVDO solution for Cloned 6800/6900!!!!!
 

dang i shouldve waited before i sold my mogul

Re: EVDO solution for Cloned 6800/6900!!!!!
 

this works on the new radios (3.35 3.49)? bec according to other posters on that site it doesnt

Re: EVDO solution for Cloned 6800/6900!!!!!
 

you just downgrade to the stock sprint rom and radio but i think its possible already with the new radios.

Re: EVDO solution for Cloned 6800/6900!!!!!
 

been looking for this specific solution for a very long time, will try out soon and will report the outcome thanks

Re: EVDO solution for Cloned 6800/6900!!!!!
 

Just tried it... No luck


But mine is a special cause I guess, cause everytime I write to my NAI for the bell server it resets it to the telus server wtf?

Re: EVDO solution for Cloned 6800/6900!!!!!
 

can u clarify ill try to find the solution for you bro!!!

Re: EVDO solution for Cloned 6800/6900!!!!!
 

Well, I followed the instructions as the above successfully.

I switch carriers from Telus to Aliant. My phone and text works but I cannot authenticate on the bell network in order to use the internet.

I matched all the EPST settings, but for some reason the M.IP Defult Profile will not accept a change in the NAI setting. Regardless how I do it.

Any ideas?

Re: EVDO solution for Cloned 6800/6900!!!!!
 

found the perfect thread for u..

http://forum.ppcgeeks.com/showthread.php?t=26691&page=3