PPCGeeks - 2.5mm to 3.5mm audio output!!

Page 3 of 3

Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- HTC Vogue (http://forum.ppcgeeks.com/forumdisplay.php?f=48)

- - 2.5mm to 3.5mm audio output!! (http://forum.ppcgeeks.com/showthread.php?t=22654)

suv	08-20-2008 01:09 PM

Re: 2.5mm to 3.5mm audio output!!

Quote:

Originally Posted by Dojey (Post 388374)

This is the one that I'm currently using:
http://www.oriongadgets.com/product_...oducts_id=2087

So far I've had no major issues with it. Some benefits of this one are:
a) it's got a mic too, so I can use regular headphones with a mic (as requested by pocomike)
b) it's much more flexible, so makes it easier to stick in my pocket or move around and whatever (e.g. won't force my plug to stick out of the touch now that it's sideways, and don't have to worry about how it sits in my pocket).

Hope that helps...

Thanks...exactly what I was looking for. Needed to charge + pass music to car aux port + ability to answer calls without removing usb cable. It was out of stock there but i found one at daydeal:
http://www.daydeal.com/product.php?p...22213&cat=3443

Dr.8820

08-23-2008 12:52 PM

Re: 2.5mm to 3.5mm audio output!!

im using the stock htc adapter plus after-market moto charger,a 3-striped gold adapter off ebay(2.5mm to 3.5mm),and a moto h710 for calls.i can even hear sprint navi in stereo.

adz1966

08-29-2008 08:54 PM

Re: 2.5mm to 3.5mm audio output!!

Quote:

Originally Posted by rstoyguy (Post 234618)

I beleive that inside the phone, there is some switching going on for the output mode. Maybee shorting pin3 to ground would switch it from stereo output to phone output mode. I don't want to fry my touch though...

I disassembled the stock adapter and soldered a standard 3.5 mm male jack to it to use with the aux input in my car. No good. There must be some kind of switching going on, as I quoted from the earlier post.
I have insurance so I will try shorting pin 3 to ground (that looks right to me too rstoyguy, someone let me know ASAP if we're wrong!!) and see if that works.
Will post results...

Just an FYI, it's easy to mod the stock headphones. Just cut off earbuds, and solder the three wires (left, right, and ground) to a $1 Radio Shack 3.5mm male plug. Works well.

sprinttouch666

08-29-2008 11:39 PM

Re: 2.5mm to 3.5mm audio output!!

a lot of decks have bluetooth for talking on the phone, would it be possible to play music from our devices via bluetooth (sorry if this is a stupid question, i havent looked into it much)

Dojey

08-30-2008 03:37 AM

Re: 2.5mm to 3.5mm audio output!!

Trying to respond to two posts here... so bear with me.

Adz1966,
I have verified this myself, but I believe the following schematic is what you are looking for. I do know that I have come across some threads talking about this as well: http://www.tracyandmatt.co.uk/blogs/...tor_pin_config

sprinttouch666,
Yes, it is very possible to play music from our devices. They support A2DP which is essentially for stereo bluetooth headsets (I'm sure somebody will correctly if I'm wrong).

ghostridr

09-23-2008 08:38 PM

Re: 2.5mm to 3.5mm audio output!!

I modded the HTC headset with a Y/3.5 splitter by splicing the earbud wires to the female(right/left) connector ends of the Y splitter and have working stero/mic now.. Only thing is I still can't charge while listening to music or using phone.

total cost = $0

dealpapa

11-25-2008 05:45 PM

Re: 2.5mm to 3.5mm audio output!!

http://www.dealextreme.com/details.dx/sku.3541

will this work?

or

http://cgi.ebay.ca/HTC-Touch-Tilt-mini-USB-3-5mm-Stereo-Audio-Adapter_W0QQitemZ230310062503QQcmdZViewItemQQptZPD A_Accessories?hash=item230310062503&_trksid=p3286. c0.m14&_trkparms=66%3A2|65%3A15|39%3A1|240%3A1318

All times are GMT -4. The time now is 10:43 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page

Content Relevant URLs by vBSEO 3.6.0