Re: Weather application - Add cities?
 

I got that too, and a soft reset after turning on roam fixed it. Don't forget the phone runs on a windows platform, and when all else fails, restart!

Re: Weather application - Add cities?
 

i still can't get it to work :(

Re: Weather application - Add cities?
 

it only works here sporadically. there seems to be a limit to how much time it works. and usually only after yet another soft reset. looks like weather panel will have to substitute.

Re: Weather application - Add cities?
 

Here's what I have found out:

This I know works on a HTC Apache with Helmi's WM 6.0 with ACCUWEATHER 1.0 on it.
To get the weather this is what I had to do:
Setup your data connection to require you to enter the password (if you don't know how see below)
Plug in your phone to active sync let it start to sync and finish
Make sure your PC is connected to the internet
While it's still connected to the internet & your phone is to the PC
Click your weather plugin to update the weather
When the data connection pops up asking for your password click cancel
Give it time and it should update

It worked on mine, even by changing cities a few times.

To Set your Data connection to ask for a password:
Go to Settings --> connections tab-->Connections
Select Manage Existing Connections under your Internet provider connection
Click Edit with your Data connection link selected
Click Next
Click Next
Then you should be at your Username/Password/ & domain screen
Delete your password and click finish

REMEMBER TO ADD THIS BACK IN AFTERWARDS IF YOU DO NOT WANT IT TO PROMPT YOU EACH TIME FOR NOW ON

I've looked into trying to go through the registry to change the city on my Apache, but so far to no avail. I can get the name to change and everything, but there is a city index that controls your information on the weather, so if that doesn't match the city you change to you won't get any info.

Here's the path if going through the registry editor:

HKLM\Software\HTC\HTCHOME\WEATHER\SETTINGS\
CITYINDEX = Custom number from Accuweather for your city
Location = City, COUNTRY (For example: Dallas, US)
LocationCODE = NAM|COUNTRY|STATE|CITY (Example: NAM|US|TX|DALLAS)

To find your Location Code go to www.accuweather.com
put in your city and search for it
the last little bit of the URL is the Location Code which should look like the info above.

I honestly don't know how to find the cityindex or I'd post that too. I know a few codes, but I'm not sure how they get that number. Short of calling Accuweather and asking them about it I don't know what to tell you. :)

City codes available are only from switching to that city and looking in the registry:
Dallas, TX = 659
Shreveport, LA = 2548


Hope this helps some of you :mrgreen:

Re: Weather application - Add cities?
 

been strugling with this for a few weeks. this post inspired me to try again. The problem I had is I was using a form of multi-tab home plugin. I was using Schen's 2.1 cause i wanted five tabs and this just won't work on the Touch (see below). To make it work, I copied over my stock home dll, ran the patch program (with modifications, it does not run stock and needs an update on the batch programs, see below). Got the new home dll, installed. edited the city list and actually figured out how (have to really read those instructions) and bam it worked. Down side is, now I am back to 4 tabs.

to correct the bat program/patcher, you have to have two copies of the dll in the folder. one in the tools folder named unpatched.dll and another in the main folder as standard htchome.dll. can also monkey around with the batch file to remove the file check - that's what i did.

Real problem is, to use Schen or other home apps, they put the weather.xml file into a directory I've heard called HTCHOME persumably in the windows directory. When you load anything like Schen it checks for the file in the directory (i think) and therefore won't load your edited copy. If someone knows how to bypass this, please post as I'd like to have my tabs back. (HHC customizer doesnt seem to add tabs to the stock Alltel roms)

Re: Weather application - Add cities?
 

ok i added the HTCHome directory and put a copy of my edited xml file in it. I had limited luck. The old city loaded from the stock Home plugin came over to the new Schen plugin and worked, but when I went to change cities, my custom city was not listed. And with no way to cancel the app, it overwrote my custom city. So now I have to go back and change it all again. This would be much easier if I could figure out where the Schen plugin was looking for the xml file and what the file is suppose to be named

Re: Weather application - Add cities?
 

Schen weather file is in under My Device>HTCHOME. In HTCHOME, there's a file called HH_0409_WeatherCities. This is the file you need to modify.
See this thread as I give instructions on how to add/modify.
http://forum.ppcgeeks.com/showthread...ight=kcaegis45

If this helped anyone, please give me a THANKS

Re: Weather application - Add cities?
 

None of the fixes seem to work for me. I can get my city to show up.... but it can never connect to actually get the weather. :(

Re: Weather application - Add cities?
 

there is always this thread which allows your custom cities plus if its not on there conflipper is always more then willing to add your city...

Re: Weather application - Add cities?
 

i've tried the above methods with no luck. one just doesn't connect and the other freezes wm6.1 completely on startup. so i took the weather tab off using HHC and i use weatherbug