Unlockers for Custom Roms on Vogue 2.31(GPS) and 0.40(nonGPS)

[xmovingx]

will this unlock a locked esn phone? ( htc tocuh? )

[mikemogren]

I have managed to get my Boot Loader Restored to the Original version:
VOGU100
SPL-0.36.0000
CPLD-3

My plan was to reinstall the signed factory ROM.
I have done that several times, the installation goes flawlessly but when it's done the phone still hangs on the HTC logo screen.

I have tried everything in this unbricking thread.

Please Help!
Thanks

EDIT: It shows that there is no radio installed when I power up, but I don't believe I can install one without the unlock??

[gp-se]

Originally Posted by mikemogren

I have managed to get my Boot Loader Restored to the Original version:
VOGU100
SPL-0.36.0000
CPLD-3

My plan was to reinstall the signed factory ROM.
I have done that several times, the installation goes flawlessly but when it's done the phone still hangs on the HTC logo screen.

I have tried everything in this unbricking thread.

Please Help!
Thanks

EDIT: It shows that there is no radio installed when I power up, but I don't believe I can install one without the unlock??

try to install the 0.40 unlocker first, then boot into bootloader and load the factory\signed RUU Rom.
I went from 2.31 unlocker -> 0.40 unlocker -> factory\signed rom no problem

[jim2561]

Originally Posted by cbus

Wow - Ran thru this entire thread and I must be missing something!

I have run the 2.31 unlocker 3 times. Each time I come to the part where I am to disconnect and reconnect - which I do - it gives me error 260.

If I understand correctly, I don't need to be attached to activesync if it says usb at the bottom of screen so I hit exit on the error screen because that is my only option.

I then go to command line and hit the enter button. Goes right to disconnect usb in activesync and then hit enter - which I do - then it says rebooting device.

it reboots with my original rom and when I hit power camera soft reset I get version 0.36.

I have the sprint touch and have the oem rom.

What am I doing wrong? Please help!

what os is the pc you are using running? have yuu tried using another?

who's instructions did you follow, and did you follow them 100% to the letter?

Originally Posted by falkor

Hi,
I followed the instructions to put the Verizon full custom roms.
the upgrade worked. Then did *228 option 1 and 2, then called Verizon rep who got me back on the network.
My problems are: I still get the roaming triangle and the phone says that I am on "preferred network" (and not VerizonWireless as it used to say), also I can't get data connection (Internet, etc.).

Any ideas? should I call Verizon ?

Thanks for all your great work!

yes, give verizon a call. they should be able to help ya update/change to the correct pri/prl for your area/carrier

Originally Posted by mikemogren

I have managed to get my Boot Loader Restored to the Original version:
VOGU100
SPL-0.36.0000
CPLD-3

My plan was to reinstall the signed factory ROM.
I have done that several times, the installation goes flawlessly but when it's done the phone still hangs on the HTC logo screen.

I have tried everything in this unbricking thread.

Please Help!
Thanks

EDIT: It shows that there is no radio installed when I power up, but I don't believe I can install one without the unlock??

try what gp-se said also...are you positive that it is the official signed factory rom?

and...who is your carrier?

Originally Posted by xmovingx

will this unlock a locked esn phone? ( htc tocuh? )

no, it is an unlocker for custom roms, not anything to do with esn locking/unlocking.

Originally Posted by esoteric

I'm having the "standby" problem that at least a couple of other people have had...

HTC Vogue on Bell Mobility that I just picked up last week.

Ran the .31 unlocker and it all went extremely smoothly (no lock-up in the bootloader either).

Everything seemed good until it went into standby mode for the first time, I can't get it out of it and have to soft-reset it.

One thing I noticed is that the green light, which is normally blinking quickly, pauses "on" for a second, then goes back to blinking softly.

I know that one person used .41 and it solved that issue, but I want to use GPS. I guess the only thing is, how do I tell if my phone has it or not? I noticed in one of the special phone codes "##xxxx#" options that it had a GPS option.

Anyways, it's incredibly annoying!

Any help would be great, thanks!

so i take it that when you say ".31 unocker" you mean 2.31 unlocker...?

when you enter the bl, what are all the version #'s?

Originally Posted by hawtboi

My phone says this:

SPL-0.36.0000
CPLD-3

Does that mean I can't use 2.31 because it has no GPS?

that means that you cant use gsp...yet. you will need to follow the instructions TO THE LETTER to use gps...thats what the 2.31 unlocker was created for.

Originally Posted by DssTrainer

Having similar issues.
I have brand new out of box. It has 2.13.00 Radio. I ran the 0.41 unlocker, I got the 3 color screen... then it says "disconnect and reconnect" So I disconnect.. listen for the "di-dung" from windows when you unplug a usb device. Then wait a few secs, plug it back in. I hear the "da-ding" when a usb device is plugged in. But at this point ActiveSync doesn't reconnect. The BL screen says it should be connected to ActiveSync. But I ignore it and try it anyway. Goes thru and says "Replacing current image: <blank> with this image: 0.41. Then says it might take 10 min... takes about 10 secs and then hard reboots and asks me to do the stylus tapping again.

Now ActiveSync doesn't work at all.. and windows makes the triple "da-da-dung" sound when there is a USB error. I tried a diff PC... installed ActiveSync... got the phone back to step one.. repeated the exact process... same result

Now I'm going to try to uninstall and reinstall ActiveSync.

Also tried doing the powerbutton+camera+resetbutton to check the bl... but it just soft resets.

ok so the fact that it only took about 10 seconds, and that the "replacing current image" thing was blank, and that it asks you to do the stylus tapping again, AND that activesync doesnt connect when you connect it back in...are all 100% normal and everything.

have you tried a hard reset?

when you try to check the bl with the power camera reset..are you HOLDING the power and camera buttons...??

[lowpro3210]

Nevermind, It Worked ... Thanks

[TheChampJT]

Alright, I've been reading and reading, can't find the answer, so hopefully someone can give me a detailed answer.

I ran the unlocker, to flash on OMJ Vogue ROM, with the Rev-A and GPS capabilities. During the process when the HTC ROM updater came on, the device wouldn't reconnect (I tried about 5 times, hard reset and starting from scratch). After waiting at the updater for about 10 minutes, I hit next and this time, as mentioned above, it said it was replacing the ROM image, but was blank. Meanwhile my phone is on the bootloader reading SPL-2.00.CoKe, after the updater went through the process, all of a few seconds, it performed the hard reset.

Now I have entered the bootloader to see SPL-2.31.CoKe, even after two hard resets, one being the auto, and one manual. The phone starts as it should, but once I turn it off, it won't power back on. I believe I saw a fix for this, but can't remember.

My biggest questions are, what can I do now? Is this normal, and I should continue to flash from here?

[Congo123]

I've done a good amount of searching . I'm confused because I ended up with a refurb phone after my lcd died (no water, no trauma to device). It reads 0.36.0000 when the phone is booting. Is that normal or is it supposed to be 0.36 only without the .0000 on a factory Sprint signed rom?

Thanks in advance,

Congo

[stogchris81]

im have that red green and blue screen on my touch now. now what?

[stogchris81]

what do you do once you get the red green and blue screen?

[DssTrainer]

Run the Unlocker 2.31
Then after it reboots run the RUU