Relock issues
 

So I was relocking my TP after a spring rom was applied...and I get to the grey screen where is says loading...and it just stays in that loading screen. I can't even reflash from here. Even after removing battery and trying to flash again, no luck...it either goes back to the loading screen (if the SD card is present) or the flash fails.

Re: Relock issues
 

put the phone into bootloader mode.

hold the power button + volume down button and then soft reset (stick stylus into the hole at the bottom of the phone).
should go to a tricolored screen and say serial at the bottom of the screen.
plug it into the usb cable to your computer, give it a second and is should change from serial to usb at the bottom of the screen.

now open the RomUpdateUtility.exe for the rom you'd like to flash.
Flash away.

PS, it's best to put your phone into bootloader mode every time when flashing.

Re: Relock issues
 

i'm having this problem too... my screen also says:
put the phone into bootloader mode...

security unlocked

Upgrade ROM code error
Please try again

serial
---------
i try to reflash the ROM via SD card and i get "Loading...."

try to use the ROM Update Utility...
[edit] it changes from serial to USB but now i get error [266] device not responding?

i could definitely use some help too... :(

Re: Relock issues
 

Make sure you do not have a .nbh file on the root of your SD card if you are using the RomUpdateUtility.exe

Re: Relock issues
 

done that too...

Re: Relock issues
 

you should download the sprint SHIPPED rom to your computer, then remove the mem card from phone, then connect your phone to computer while it's in bootloader mode and wait for it to say USB on the bottom of the phone screen, then open the shipped rom exe file and it should work.