Keyboard glitch
 

My onscreen QWERTY keyboard is stuck in symbol/number mode and I've tried some of the solution, includimg hard resetign, on the forum to no luck. I was wondering if anybody has a way to fix it without going to a custom ROM.

Re: Keyboard glitch
 

I experience this once a while but it goes back to normal automatic I am running custom rom.

Re: Keyboard glitch
 

Are you using the classic word completion .cab?

Re: Keyboard glitch
 

No I had turned SIP off but when this problem occured I turned it back on and removed all my settins on the jeyboard back to stock.

Re: Keyboard glitch
 

*bump*

Anybody?

Re: Keyboard glitch
 

I have this same issue, I have the classic word completion .cab installed. Any ideas as to a resolution?

Re: Keyboard glitch
 

Reinstall the classic word completion .cab

Re: Keyboard glitch
 

ummm... you see the little arrow next to the keyboard that brings up the QWERTY keyboard (on the bottom of the screen between Send and Menu) click the arrow and it should come up and sayTouch Input settings then just click Full QWERTY

OR! Settings/Input and chenge the input method to Full QWERY

Re: Keyboard glitch
 

This happened to me, and I noticed that I had "enabled" the T9 in Diamond Tweak. I disabled, wait a bit, soft reset, and it's back to normal.

You could also try this:

Go into the registry and ensure the following settings, then soft reset.

HKLM\System\CurrentControlSet\Control\Layouts\e001 0409
Layout Text to "eT9 IME" (This is the actual Dflt, but it changed to = COMP IME )
Ime File to "\windows\eT9ime.dll" (This is the actual Dflt, but it changed to = / windows/ compime.dll) – that’s why the problem there.
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}
(Default) = "XT9"

Re: Keyboard glitch
 

I just wanted to post to anyone stumbling across this thread again that to fix the problem with the keyboard that only shows numbers/symbols, you need to reedit your registry to have

HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Ime

CurrentET9Style = 0

For some reason it'll sometimes change 1 if you have the original autocomplete hack done. Reverting back to 0 fixes the numbers only issue and gives you back your normal keyboard. You don't even need to reset for this to take hold.

On a side note I think this glitch is caused by powering down the device with your power button instead of a soft reset. It must do some sort of cleanup operation as you power off the device and revert some reg entries.