Setup ICS to work for VZW Touch Pro
 

Ok, for those on VZW who want Internet Connection Sharing without paying for tethering this may be your answer. This worked on both my brothers and my Touch Pros. Your results may vary. I don't remember who I got the ICSInstall.cab from, but I think it was here or XDA-dev, so Thanks.

Ok.
Install ICSInstall.cab to you phone.
The go to your dialpad.
Dial ##778 send.
Click on edit.
Enter 000000 for the Unlock code.
Select View info.
From the menu select M.IP Default Profile.
Click on DUN NAI, Menu, Edit.
Delete "dun." from 10digitmtn@dun.vzw3g.com, so it should be 10digitmtn@vzw3g.com.
Click OK.
Click Menu, OK.
Here a popup asks, "Press ok to reset the device." Click OK.
Device will reboot.
ICS should now work.
Select IntShrUI from your program list.
Select USB. (I have not tried BT Pan so IDK if it works)
Then click connect.
Connect your USB cable the your phone then to your PC.
Voila your ICS should work.

If you try this with BT, and or WMWifirouter post up if I haven't tested and edited my post.

Edit: Tested and working over BT. Tested with my Samsung Q1 Ultra UMPC with BT. (Posted this edit with the BT PAN). Now just to figure out WMWifirouter...

Re: Setup ICS to work for VZW Touch Pro
 

I would like to Confirm that this worked. I'm using the Internet as we speak :)

Thanks for the write up!!!!!

Re: Setup ICS to work for VZW Touch Pro
 

Edited first post. BT PAN works too...

From BT PAN...

http://www.speedtest.net/result/364546689.png

Re: Setup ICS to work for VZW Touch Pro
 

No work for me.

What you mean by dialpad? On the phone, call that ##778?

Re: Setup ICS to work for VZW Touch Pro
 

Yes, pretend that you are calling someone with the phone number of ##778. Don't worry, an actual call will not be placed, but instead, the phone will ask you for a password to which you respond with the six zeros.

Re: Setup ICS to work for VZW Touch Pro
 

I tried this on my TP and when i dial #778 it tries to dail that number instead of asking me for an unlock code. Any idea guys?

Re: Setup ICS to work for VZW Touch Pro
 

FWIW, I got mine working fine just by installing ICS and WMWifirouter, without making any other changes.

Re: Setup ICS to work for VZW Touch Pro
 

##778 two #'s hope this helps

Re: Setup ICS to work for VZW Touch Pro
 

I tried it with 2 #'s and it still does the same thing. Dials and then the VZW operator comes on and says your call can not be completed as dialed etc...

Re: Setup ICS to work for VZW Touch Pro
 

weird it should work... did you soft reset and try again?

Re: Setup ICS to work for VZW Touch Pro
 

Yeah i tried that and doesnt work...hmmm

Re: Setup ICS to work for VZW Touch Pro
 

same with me, i tried to..it say number can't be dial.

Do you have assistance dial enable or disable? I disable mine

Re: Setup ICS to work for VZW Touch Pro
 

Same issue with Assisted Dialing On or Off...

Did soft reset, no dice

Still getting the message "the number you have dial has changed or no longer in service, please check the number and try again..."

Re: Setup ICS to work for VZW Touch Pro
 

it did the same thing on mine also, however i canceled the verizon cabs during initial setup

i just did a hard reset and let all the cabs install and now it works

Re: Setup ICS to work for VZW Touch Pro
 

I have dial assist on

Re: Setup ICS to work for VZW Touch Pro
 

I'll have to try a hard reset and cancel the verizon cabs during setup...maybe that will help..i'll let you know when i do it

Re: Setup ICS to work for VZW Touch Pro
 

OP instructions worked perfectly. Thanks! Now I can use TP as modem when no LAN or WAN is available without loading VZAccess Manager on my laptop.

Re: Setup ICS to work for VZW Touch Pro
 

Just to be sure im not confusing anyone... the OP instructions were NOT working for me.
I assumed it was because when i first set up the phone i did not let the Verizon cabs install

I did a hard reset, let them install this time, and now the OP instructions work fine

Re: Setup ICS to work for VZW Touch Pro
 

Alrite...I did a hard reset and now it works. thanks!

Re: Setup ICS to work for VZW Touch Pro
 

If anyone disabled the HTC Dialer Skin and the ##778 doesnt work. Re-enable the Dialer Skin and try again that will do the trick.

Re: Setup ICS to work for VZW Touch Pro
 

Yep it doesn't work with the skin disabled. I re enabled and it worked fine.

Re: Setup ICS to work for VZW Touch Pro
 

The easier solution...

WMWIFI version 0.91 is free for personal use. It worked great!

Install the ICS cab attached in this thread and install WMWIFI..no config needed. Launch, lock and load baby!

Re: Setup ICS to work for VZW Touch Pro
 

I have the tp w/ verizon. I cannot install ICSInstall.cab. it says it is not digitally signed with a trusted certificate. I am trying to get wmwifirouter to work. Everything connects but only locally.

Re: Setup ICS to work for VZW Touch Pro
 

So does almost every cap file. Just ignore that and install it anyways.

Re: Setup ICS to work for VZW Touch Pro
 

When i open ICS and click connect, it says "Cannot connect for an unknown reason. To change your connection settings, tap settings".

I also cant get WMWifiRouter to work either. it seems to connect fine, but i cant get on the web from my laptop.

I am using a sprint touch pro with verizon software if it matters. I am also using a usb cable, not BT.

Re: Setup ICS to work for VZW Touch Pro
 

I installed the ICS cab, and it appeared to install successfully. However, when I start it, it only offers me connections with USB or Bluetooth (PAN). No WiFi even when WiFi is 'on'.

Is that normal? :scratch:

Re: Setup ICS to work for VZW Touch Pro
 

Well, this is a bonus for the VZ crowd....

Tested speeds: USB 1.1 - DL 347 /UL 87...
BT PAN: DL 777 / UL 65

No speed demon but I can at least get to my stuff online if needed in an emergency.

Wireless G: 9893/930

Re: Setup ICS to work for VZW Touch Pro
 

Awesome. Worked perfectly on my 6850. Why doesn't Verizon just leave this enabled? We paid enough for this device.

Thanks for the info!

Re: Setup ICS to work for VZW Touch Pro
 

Here is a copy WMWifiRouter that should work.

Re: Setup ICS to work for VZW Touch Pro
 

I installed the ICS cab fine, and was able to remove "dun." from DUN NAI, when I connect my PC (tried WMWifiRouter and IntShrUI w/BT PAN) it connects just fine, but the network is listed as local-only, no internet access

Any ideas? on a vzw htc touch pro of course..

Re: Setup ICS to work for VZW Touch Pro
 

Same deal here. I can't get ICS to work.
I have the Sprint version, hacked to VZW though, that might be an issue.

Re: Setup ICS to work for VZW Touch Pro
 

VzW Touch Pro. MacBook Pro with OSX (10.5)
Installed WMWifiRouter from http://www.wmwifirouter.com/
Installed ICS cab from this thread.

Let wifi router do all the normal stuff in the setup wizard.

Open up ICS--only get 2 options for PC Connection: BT PAN and USB

When I run Wifi router, I can find it, but the Mac finds it as a "device" not as an access point. Of course, no internet access.

Any thoughts?

Re: Setup ICS to work for VZW Touch Pro
 

When you ran ICS, which option did you use, USB?

Re: Setup ICS to work for VZW Touch Pro
 

I"m not trying to hijack, just trying to get this to work!

If I click on USB in ICS, it won't connect---gives an error, "cannot connect for some reason...."

Re: Setup ICS to work for VZW Touch Pro
 

Got it working. Did a hard reset of the phone, installed the ICS cab and it works fine now. Did not have to change anything, just installed ICS

Re: Setup ICS to work for VZW Touch Pro
 

This worked for me ... what other tricks do you have up your sleeve?!!!! :)

Re: Setup ICS to work for VZW Touch Pro
 

Wait how did it work? How are you all running ICS?

Re: Setup ICS to work for VZW Touch Pro
 

sorry for the bump...but my trial of WiFiRouter is running out....

Re: Setup ICS to work for VZW Touch Pro
 

This worked for followed all instructions stock ROM.
Questions:
1) Ping from command prompt doesn't work. What else doesn't work? How to get it to work?
2) I set this to a public network (Vista). Is that the safe thing to do? Is it ok to make it private with a firewall?

thanks

Re: Setup ICS to work for VZW Touch Pro
 

Thanks guys and gals. Worked like a charm over WiFi on HTC Touch Pro with the posted ICS cab and the latest WMWifiRouter trial as of 12/22/08. Did not have to do hard reset. Simply did the equivalent of a soft reset by cycling the power on the phone and then running through the config wizard on WMWifiRouter. If you already messed around with the WMWifiRouter, simply reset the settings by going to: Options/Tools/Reset all settings. Didn't have to muck with ICS at all. Left it all as-is, and let the WMWifiRouter do its magic with the default settings.