PPCGeeks
Page 7 of 9 « First 56 7 89
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Touch Pro (http://forum.ppcgeeks.com/forumdisplay.php?f=63)
-   -   Ring delay with Incoming Call (http://forum.ppcgeeks.com/showthread.php?t=43242)

rhamburger 12-07-2008 08:14 PM
Re: Ring delay with Incoming Call
 
I found a pretty simple work around for this issue. It's not a fix but it does the job. If you set the phone to vibrate and ring it will vibrate before you actually hear the the phone ring. It appears to vibrate at the same time the phone lights up then the ring follows. I noticed the delayed ring as well but it was never an issue for me because the vibration would always go off before the ring.

deadwrong03 12-13-2008 03:47 AM
Re: Ring delay with Incoming Call
 
thanks for that tip it will work for now im still waiting on a fiz to eliminate the delay completely

jmilt13 12-24-2008 02:53 AM
Re: Ring delay with Incoming Call
 
Anyone come up with a fix and kept the HTC dialer?
I tried all formats of audio on the device... No avail
I did call verizon and have them change the length of ring from 15 seconds to 30 seconds.... call *611

Deimoss 12-24-2008 05:13 AM
Re: Ring delay with Incoming Call
 
Got to work tonight, and got a call in the lobby as i was walking in, two rings and it goes to voice mail..

Very annoying, so here i go to convert ringtones to wav ...ugh probably wont even help :/

Jef_Leppard 12-25-2008 12:59 PM
Re: Ring delay with Incoming Call
 
Quote:
Originally Posted by bruceo (Post 545083)
It is terrible that you can see the light ring and phone icon ringing but the phone wont actually ring until at least 2 or 3 rings, totally unacceptable. Hopefully someone discovers a real remedy.

Update: Found an old post with some great info and it seems to have worked for me doen to 1.5 rings till the ringtone comes on vs 2-3 check it out: The regedit seems to stick for me through soft reset

HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0
Change 'Script' from 'av0pw3r' to 'av0pr' and you'll get 0 sec delay.
OR change it to
av0pw1r = wait for 1 sec
av0pw2r = wait for 2 sec

http://www.ppcsg.com/lofiversion/index.php/t75344.html


changed mine to "apr" plus the diamond tweak, plus changed my ringtone to .wav. i call and get the 1st fake ring then my phone starts either at the begining of the second ring or halfway through it, im happy with that.

lexluthor 12-25-2008 01:27 PM
Re: Ring delay with Incoming Call
 
Quote:
Originally Posted by Jef_Leppard (Post 600002)
changed mine to "apr" plus the diamond tweak, plus changed my ringtone to .wav. i call and get the 1st fake ring then my phone starts either at the begining of the second ring or halfway through it, im happy with that.
You mean you changed it to av0pr?

Jef_Leppard 12-26-2008 06:23 PM
Re: Ring delay with Incoming Call
 
Quote:
Originally Posted by lexluthor (Post 600037)
You mean you changed it to av0pr?
no.

http://img101.imageshack.us/img101/1292/aprot9.jpg
http://img101.imageshack.us/img101/a...jpg/1/w752.png

discipler 12-26-2008 06:55 PM
Re: Ring delay with Incoming Call
 
I had the same problem and someone suggested I try different ring tones. I tried a few of them and settled on "Ring - Generic 1" and seem to have better chance to catching the call.

HotSauce 01-26-2009 10:50 PM
Re: Ring delay with Incoming Call
 
Maybe I'm lucky, or Bell has done something with my phone, but I have virtually no delay. My ringtone comes on before the 2nd ring even starts. It's not a WAV file, and I'm using the TF3D dialer, not the WM dialer.

RUBIXONE 01-26-2009 11:24 PM
Re: Ring delay with Incoming Call
 
photocontacts pro did the job for me..im using htc dialer and no registry change and my phones rings right after the first ring ends


All times are GMT -4. The time now is 08:31 PM.
Page 7 of 9 « First 56 7 89
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0