Originally Posted by GhettoBSD (Post 564758)

But usually it rings twice and thats it lol

So is there a definitive fix for this?

Originally Posted by jmorton10 (Post 564802)

yea, swapping dialer skins fixes it but there are disadvantages to that also. If you switch to the WM default skin, it will ring almost instantly but it won't dial 911 & ## codes won't work (& it's butt-ugly).

I am using Paul DeGroots blue VGA dialer which is a pretty good compromise. It looks awesome & rings almost as fast as the WM skin.

~John

Originally Posted by bruceo (Post 545083)

It is terrible that you can see the light ring and phone icon ringing but the phone wont actually ring until at least 2 or 3 rings, totally unacceptable. Hopefully someone discovers a real remedy.

Update: Found an old post with some great info and it seems to have worked for me doen to 1.5 rings till the ringtone comes on vs 2-3 check it out: The regedit seems to stick for me through soft reset

HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0
Change 'Script' from 'av0pw3r' to 'av0pr' and you'll get 0 sec delay.
OR change it to
av0pw1r = wait for 1 sec
av0pw2r = wait for 2 sec
and so on...

++

Edit :

Here are the ringing codes

a - stands for display
r - repeat/replay the script again
c - sets the volume C50, c150, c100
f - means flash .. f1 flash for 1 second and f0 stands for flash continuously
p -means play ringtone
v- vibrate then incorporate with number to state how many seconds it will vibrate example. v3 vibrate for 3seconds or v0 for continous
w - stands for wait or pause then specify how many seconds like w3(wait for 3 seconds)

here are some examples
Flash - af1w60f0
Ring - apw3r
Ring Once - ap
Increasing Ring - c50apw3c150r
Vibrate Then Ring - v3w3apw3r
Vibrate - av3w3r
Short Vibrate - av1w3r
Vibrate Long Then Ring - v3w3v3w3apw3r
Vibrate And Ring - av0pw3r
Increasing Ring And Vibrate - c50apv3w3c150r
Fast Vibrate And Flash - af1v1w1f0r
Vibrate and Ring Continously without pausing - av0pr

info found here

http://www.ppcsg.com/lofiversion/index.php/t75344.html

Originally Posted by OR78 (Post 564799)

Don't know if this is off subject but a good FYI. If you disable the dialer skin you CANNOT use any of the programming codes. I confirmed this with a Sprint Tech. So If you get into the programming much you might not want to use the WM dialer.

Originally Posted by jmorton10 (Post 564977)

True, but once you get your programming done it is not something you need to worry about very often.

I can't do all the functions with my dialer skin, but when I need to it's easy enough to swap back to the Diamond skin temporarily.

~John

Originally Posted by nuuuuts (Post 564991)

I tried to switch back to the default dialer but it would never go back.

Needed to do a hard reset to get the default dialer back.

.

Originally Posted by nuuuuts (Post 564991)

Needed to do a hard reset to get the default dialer back.

.