Battery & Performance hacks - all cabed up for my friends

[getimmaaw]

Originally Posted by codyppc

with all the flashing of roms and what not i figured i would share my cab.

this is a few reg edits that were found on a few sites. here is the main one... http://www.sprintusers.com/forum/sho...d.php?t=127164

ppc link here... http://forum.ppcgeeks.com/showthread...=battery+hacks

this all started on the Q but works on many WM devices. i have been running it on my mogul for quite a while. works great.

this is what is changes...

(copied and pasted)
Speed Hacks

These have been posted elsewhere but the 3rd one listed here is never mentioned and often left out. A shame since it seems to have the most effect!

The following 3 hacks increase system performance and makes the Q more responsive:

Navigate to: HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE\
Changed limit from 16384 to 32768

Navigate to: HKEY_LOCAL_MACHINE\System\StorageManager\FATFS
Changed - CacheSize to 4096

(NEW!) Navigate to: HKEY_LOCAL_MACHINE\SYSTEM\StorageManager\Filters\f sreplxfilt
Change “ReplStoreCacheSize” dword decimal value to 4096 or 8192 (edit: I find 4096 best, g-funk finds 8192)

-----------------------------------------------------------------------------------
Battery Life

A couple of us have tested this and found a nice increase in battery life. On my Treo 700 it seemed to do nothing but on the Q it greatly helped (I ran for 12 hours yesterday push email in a low signal environment and stayed at 4 bars battery--normally would have been at 2 or 3)


Quote:
"...simple registry trick and hack that will enable power management on several communications protocols to save and conserve the battery life, and thus extend and prolong the battery of the Windows Mobile devices."

Navigate to: HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms
Default value type and value are
“DisablePowerManagement”=dword:1
Change to
“DisablePowerManagement”=dword:0

Navigate to: HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms
Default value type and value are
“DisablePowerManagement”=dword:1
Change to
“DisablePowerManagement”=dword:0

Navigate to: HKEY_LOCAL_MACHINE\Comm\PPTP1\Parms
Default value type and value are
“DisablePowerManagement”=dword:1
Change to
“DisablePowerManagement”=dword:0

Navigate to: HKEY_LOCAL_MACHINE\Comm\L2TP1\Parms
Default value type and value are
“DisablePowerManagement”=dword:1
Change to
“DisablePowerManagement”=dword:0

in the zip file below is a cab. move it to your device and tap to install. remember to wait one minute for reg changes to take effect and then do a soft reset.

enjoy, cody

original thread here with over 3600 downloads

There is no settingfor Irsir1 in the touch pro. just Irsir and that does not contain the disablepowermanangement key

[GhettoBSD]

I agree that it does probably come down to signal strength.

I also don't see the people who've dl saying what's going on :P

So i'll try it and report back :P

[pask2155]

hey the reason no one is knowinf if this works is because the cache is upped to inprove performance with the battery enhancement. All this is meant to do is make your phone faster without losing battery life faster.

once this program is d/l on your phone your system will be using almost 48% of it compacity while without it you are usually at 40-42%.......so you can have the same battery life and a faster performance because more stuff is allowed to to be stored on your front cache ect. then normal.

so in my opinion it works, you just wont notice it because you will be running with a faster phone, with the same battery life, if someone would just have the battery hack/cab then I think this would be more efficient for use all if we only want better battery life!

[lordvader]

Anyone tried it on Att Fuze ?

[Mutiny32]

Originally Posted by lordvader

Anyone tried it on Att Fuze ?

It works.

[lordvader]

Originally Posted by Mutiny32

It works.

After we Install
does it show in Programs ?
(cos I cant find it )
do we need to start the Program ?
Do we need to manualy do the Hacks or the Cab doe sit all ?
thxs