[BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Please read this entire post!


I have created a complete bundle of GingerBread with the newest kernel from GIT (Feb 28 / 1276), and the newest rootfs from GIT (Feb 24).

Please, feel free to DONATE to the XDAndroid project!

Every little bit helps!

Directions:

1. Download the full bundle (zip). (Updated Mar. 11 2011)

If instead you just want the system.ext2 (zip) file (updated Mar. 25 2011) by itself...

2. Extract it. You’ll see a folder, GBX0A, copy its contents to the root of your SD card.

3. Go into the STARTUPS folder. Grab the appropriate startup.txt for your device (if you don't know what device you have, you should read the FAQ), and move it to the root of the card (or where you run haret.exe from. If you want to change the location of the build, put a rel_path= statement in the cmdline section of the startup.txt. Mine is located two folders deep on the SD, so my rel_path=Androids/TP2Ref)

4. Click haret.exe on your phone thru File Explorer, Total Commander, etc.

5. Watch the boot process - you’ll see a section where you have to calibrate the screen - don’t forget to do this! Optionally, if you’ve already done this copy your ts-calibration file from your other build.

**This isn't working with 1276 (the newest kernel from GIT, which I've included). So, I have attached a ts-calibration that should work for RAPH/DIAM alike. Extract the .zip (should be a single file - ts-calibration with no file extension) to where you run haret.exe from. If you want to create your own, use an older kernel from GIT (some have to use 1225) and generate the ts-calibration file. Once you have the calibration file hold on to it (make 15 copies if it's a good one :p), reboot & go back to the newest kernel! Thanks**

6. Profit! :D

Let it settle out on the first boot. Many have reported they had to reboot basically because it was so slow - I think if you let it sit for about 10 mins so the media scanner can go thru everything, etc. If you want adb in and watch the processes via top, you'll see why the phone seems so slow - there's lots of background processes cranking because this is the first boot ;).

Troubleshooting:
Please read the... FAQ
If you have any issues with the kernel, feel free to change it:
There are some devices that are having issues with the newest kernels. Please see the kernel autobuild service to get newer or archived kernels. Once you download a replacement kernel, go to where you run haret.exe from - remove your old zImage/modules-xxxxx.tar.gz. Take the new zImage/modules-xxxxx.tar.gz and replace the old ones, same folder - where you run haret.exe from. Make sure the ‘zImage’ is named just that. Do not rename the modules file, do not extract it - should be in .tar.gz format.

In addition, I am using the newest rootfs from GIT - Feb. 10. There are other rootfs options, see F22’s thread if you want to use more keys or move around the home button. Of course, there's always the roofs autobuild service if you want "stock" rootfs images - F22 builds his off of these and modifies them ;).

Random issues can often be solved by forcing the system to create a new data.img. If you're worried about losing data, Titanium Backup works quite well. If you wish, you can rename the data.img to something else, and let the system create a new one - just to see if it resolves your problem.

Similarly, if you wish try formatting your SD card - I prefer to use the HP Tool - do a full format, FAT32.

Obviously this build is Alpha, and there are going to be problems. The next post will address issues particular to this build - PLEASE READ THESE before asking questions! Feel free to post questions in this thread, I will do my best to address them. Big thanks to stinebd for releasing the system image, and of course the other developers for their hard work on making these kernels available.

stinebd's original post HERE

Mar. 11 2011 Changelog

Things broken in this build:

libgps - explains itself, no GPS and probably no netloc (cell-tower based location)

HW3D is either not working, or just not preset - I ran neocore and let's just say a lot of textures are missing. Got a ridiculous score, but again - no textures, not much to render haha.

DIAM users have reported the g-sensor is flipped - This line should be in the startup.txt file if that wasn't obvious ;).

Thanks to emc02 for that solution!

The keyboard should be fine, but I've had some Blackstone users complain - if you want, switch the keyboard out with another. mr_grisha's original post.

Anything that's broken in Froyo, is probably broken in this build. Although what is interesting, I noticed that in this build I don't have the landscape-on-boot issue that I get with Froyo...

Re: [BUILD] **Complete GingerBread Bundle!!**
 

March 25, 2011

• Further tuned keyboard sizing to be useful on VGA (also made the key labels bigger)
• World-phone settings support (very important for future RIL enhancements especially on CDMA)
• Enabled HSPA icon (someone on GSM please let me know if it actually works)

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha!
 

Great man! I have been running NEOPEEK's GB if im not mistaking and yep, these are deffinately BETA people.

Im going to download your build when I get home and play with it for a bit. THANKS DEVS!!!

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha!
 

Update folks!

Cam, fixed soft keyboard... Y'know, fresh goodness from stinebd.

[Changelog]

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Switch to this from the froyo one, wanted to mention that the power collapse on my raph800 seems to be fixed.

Camera and wifi work fine

Some things that are broken is the auto rotate (its stuck in landscape) and the portable hotspotting is also broken. The hotspot was broken in Froyo but the landscape issue is new.

although I did just copy the data.img over from froyo so I didnt have to reinstall/setup so I'm not sure if there is incompatibility but it didnt look like it.

still working on trying to get swype on this though :( using it on windows got me addicted to it :D

edit: wanted to mention this since i didnt see it anywhere. Saw this in froyo too but in this android as well. The battery reading may not be accurate. Sometimes the battery widget shows I'm at say 80%. I'll turn off power and sometime later it'll read 90% before dropping to like 78% after a few minutes of use.

The software keyboard isn't fixed like the post above mentioned. It might be on just raph800 but I'm getting a mashed keyboard look with no letters in it

edit: The power collapse may not be fixed, I just had to soft reset it. But it happened when I pluged it into computer so I don't know if that was cause or coincidence

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Your posts are difficult to respond to :p.

Auto rotate should be fixed... If you go back to the home screen does it still stay in landscape?

You should not copy the data.img over - please try to rename it (don't need to delete...) and let it create another one (assuming you have the space on your card!). See if that fixes your auto-rotate issue.

No clue on Swype... that's why I have a physical keyboard! You don't like yours? :p. I never got the hang of swype, I was always wayyyyy faster on the physical kbd.

As for the software keyboard, it certainly is fixed for me, and the guy who is building these system images has a RAPH - not an 800, but that shouldn't matter for the soft kbd sizing. So can you provide a particular situation or screenshot of the soft keyboard not being sized correctly...?

Power collapse is almost completely up to the kernel - granted there are some userland pieces responsible, but most is up to the kernel.

I'll address your kernel questions in the other thread, as I don't think you were updating/changing the kernel correctly ;).

Almost forgot - the battery is horribly inaccurate, for many different reasons - this is being addressed, there is a new piece of software to calibrate our batteries. The code has been written, now we just need to figure out how to integrate it and make it automated. The current battery code is... awful, but it's better than it was pre-October 2010 ;).

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

hope this works, but here are the screenshots

This one is of keyboard
http://dl.dropbox.com/u/2093243/snap20110314_144136.png

This is when autorotate is off (the phone is held vertically)
http://dl.dropbox.com/u/2093243/snap20110314_144201.png

This is when autorotate is on (The phone is still vertical so it shouldnt be in landscape)
http://dl.dropbox.com/u/2093243/snap20110314_144205.png'

edit: im not 100% sure, but it seems like power collapse isnt completely fixed. It still bugs out about 30-40% of time... (not sure on this % but it broke around 4 out of 10 times so far

edit: I got around the keyboard by installing slideit. Since I wanted a swype like keyboard I'm happy with slideit.

edit: About the autorotate, could it be the ts-config file I'm using? The one you included didnt work but I've been using the same one that was made when I used eclair. I'm not sure if something changed since then and the file is old but ive attached it so it might help you find out whats wrong.
http://dl.dropbox.com/u/2093243/ts-calibration

edit: adding a note saying that the power drain on this seems to be fairly high on my raph800

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Been trying to fix this but ran out of ideas...

I'm using the ts-config file I linked to in the dropbox link in previous post. The touch screen works and all but the phone when I use camera seems to think I'm holding it opposite than how I am. Example is I hold it up and it shows screen as down, when I rotate phone right, it shows left. This is same when I hold phone down and left, its always the opposite direction being shown.

This might be why I have auto rotate issues but the ts-config file you posted doesnt allow touch screen to work. The same ts-config file I use works flawlessly in froyo frx05 so I dont know why it is messing up in gbx0a. Any help would be appreciated

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

The ts-calibration file is for touch screen only. There was a fix (I thought I put it on the second post, but I forgot to copypasta it over here... sorry!)

It's in the second post, but the jist is Although you have a RAPH it looks like - what RAPH do you have...?

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

I have raph 800. Forgot to mention it since I said it before in one of the posts lol.
It looks that fixed the problem, thanks. It also fixed the auto-rotate issue as well.

Saw that post (2nd one with fix) but didnt think it applied to my phone since it listed diam100. I guess it can be modified to include raph 800 as well lol

I'm just wondering if you know that the phone seems to heat up a fair amount with minimal use. I have no wifi/gps enabled but just playing around on phone (no internet just opening applications) heats up the phone more than I expected. Doing same in winmo 6.1 I don't have this problem so I'm not sure if it's because something is off in Android or if the applications accessing data plan in background is doing this.

Anyhow that was just another one of my comments on gingerbread since I want to help get the bugs out of it but I dont know how to do any actual programming :( so I'm resorting to giving feedback :D

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Yea, it probably gets hot from poor power management - and processor management.

Well I thought this issue was DIAM only to be perfectly honest - and not all RAPH users experience the issue... that is very strange indeed.

Glad the fix worked for you tho! I'll change the post ;).

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

No overheating here, seems to run perfectly except for the noted problems.
Only time my Raph800 gets warm is when charging, which is to be expected.

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

I'm experiencing a lot of random restarts (to the splash animation) from normal usage.I've deleted the data.img several times to try to resolve it. Seems like any app that takes longer than normal to execute...the system just resets. Mine's a raph800 btw.

It's really fast, when it works.

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Hrm, I don't think I've had any reboots to the XDAndroid bootani... but I honestly haven't run this build for any extended periods of time, I stick to Froyo because of the issues with data in this build.

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

I've had the reboot to the xdandroid screen once in a while. It seemed to help once I got it ran a few times and it becomes a bit more stable.

Although once it gets hot and starts lagging, seems like it goes to boot screen about half the time, the other half it does comeplete reboot into winmo

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Any solution to the problem involving the keyboard shown here:
http://dl.dropbox.com/u/2093243/snap20110314_144136.png

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Don't you have a RAPH so you don't have to use the soft kbd..? :p

Seriously tho, that shows that I forgot to update the second post in this thread vs the more active xda thread... sorry 'bout that!

Here's the updated details you'll care about:

The keyboard should be fine, but I've had some Blackstone users complain - if you want, switch the keyboard out with another. mr_grisha's original post.

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

I am able to solve the problem arrrghhh, but I have just noticed that my browser isn't working correctly. It closes while loading the home page. Any suggestions? FYI im trying to connect on my 3g network

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Yea, it's kinda silly - basically location services thru Google's homepage try to locate you... it fails since libgps is not really functional... and it kills the browser.

I don't know if you can change the browser's homepage, or if using an alternate browser like Dolphin or Opera would be a better option - I actually prefer Froyo as I really like the location-based services in Android :D.

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

I have since changed my wireless settings to WPA as you suggested, but all that happens is that is shown is: "Network Name" not in range.secured with WPA/WPA2 PSK
How did you enable Froyo to work for you despite this problem?
Ok if I were to change the homepage, would that solve the problem? or rather just prevent me from going google.com and allow me to view other sites?
Also, how to I enable to the Andorid Market on tihs build?

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Hrm... I hate to say it but all of these things should work out of the box. WPA(2) worked for me out of the box. The Market... Just click on the Market app in the drawer - reboot if you don't see it. Not sure how to solve the browser problem. This build needs quite a bit of work for sure, I recommend using Froyo if the bugs are too much of an issue.

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Market only appears in Manage Programs. It can't be edited and it isn't activated, nor can it be.
Do you recommend a specific build of froyo to use? From where?

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Where in Manage Programs? Have you tried adding the shortcut to the desktop? Have you tried rebooting?

I'd recommend the Froyo build that's a few threads down...

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

I got the Froyo build. The browser and Marketplace problems have been solved, but Wi-fi continues to just scan. and I keep getting the message that my WPA network is not in range. Wi-fi is disabled on Windows Mobile.

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

I might need to see a log. Do routers actually pop up in the list? Did you change anything from the bundle?

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Ok so I have XDandroid on my Raphael 800 and have yet to be able to scan and connect to my home wifi network (it is the only one that I have tried to connect to. It is a WPA Personal with a TKIP algorithm. Wifi spends minutes, hours if I would allow it to, to do no more than “scanning...” I sometimes get the error message “android settings “in process come.android.settings) is not responding. This leads to a Wi-Fi Error.

It is Andorid Version 2.2.2
Kernel Version- 2.6.27.46-01318-g4ff4420
Build- FRX06


Any better suited builds or kernel that should be used please let me know.

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Well, triage it.

Does it connect to an open network?

If so, then you know wifi at least works...

If no networks show up during the scan, something is definitely wrong. Make sure when you update kernels, the modules match - and delete any old modules files before copying new ones.

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

"triage it" What do you mean?
Well there are no open networks. And it cannot scan, so I would have to make my network temporarily open (insecure) to allow it to connect. So I would have to "add network" How do I check and see if my modules match? My modules and zImage are from the same batch.

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Ok, so I opened my home network. It is still not in range and no open networks can be found even though the new neighbours have one. Should Wi-fi be on or off on WinMo. Should I connect to the network on WinMo then boot xdandroid?

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

I guess you can try it. I don't need to, but I also have no RAPH to test with. AFAIK, wifi works out of the box... if there is an issue, I'd need to see some logs.

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

I take it that the Dev Tools from Market isnt the correct one to use?

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

There is a Dev Tools is an apk in the AndroidApps folder, but ironically I don't think it has terminal emulator.

As for pulling logs on the device, I like ConnectBot for a terminal tool. For pulling logs I usually prefer adb because you can pull logs straight to the computer.

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

This is what adb produced:

05-11 22:42:49.880 E/HierarchicalStateMachine( 1232): TetherMaster - unhandledMessage: msg.what=3
05-11 22:42:56.570 E/Tethering( 1232): Error listing Interfaces :java.lang.IllegalStateException: Cannot communicate with native daemon to list interfaces
05-11 22:43:06.580 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:43:36.660 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:43:46.600 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:43:56.680 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:44:16.650 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:44:36.690 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:44:51.350 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:45:06.690 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:45:36.810 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:45:46.800 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:46:36.850 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:46:56.870 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:52:00.170 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:52:10.280 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:52:20.250 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:52:30.250 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:52:40.300 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:52:50.310 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:53:00.220 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:53:10.420 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:53:20.340 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 22:53:30.290 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 23:03:48.120 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 23:03:57.940 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 23:04:07.980 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 23:04:17.990 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 23:04:38.000 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 23:04:57.490 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 23:08:53.750 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 23:20:40.160 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 23:20:50.210 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-11 23:21:10.170 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring

Then I rebooted the phone and turned off wi-fi, turned on wi-fi which let it "scan" then an error occured then turned wi-fi off with an error status. During tihs time I produced the following log:

05-12 00:01:59.180 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-12 00:02:09.190 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-12 00:02:09.460 E/WifiService( 1232): Error configuring interface tiwlan0, :java.lang.IllegalStateException: Expected code 213, but got 600
05-12 00:02:09.480 E/SoftapController( 1217): Softap already stopped
05-12 00:02:10.740 E/wpa_supplicant( 1666): Set_key: Wrong Key
05-12 00:02:10.740 E/wpa_supplicant( 1666): Set_key: Wrong Key
05-12 00:02:10.740 E/wpa_supplicant( 1666): Set_key: Wrong Key
05-12 00:02:10.740 E/wpa_supplicant( 1666): Set_key: Wrong Key
05-12 00:02:10.940 E/wpa_supplicant( 1666): prepare_filter_struct: type=0
05-12 00:02:11.000 E/wpa_supplicant( 1666): prepare_filter_struct: type=1
05-12 00:02:11.040 E/wpa_supplicant( 1666): prepare_filter_struct: type=3
05-12 00:02:11.290 E/HierarchicalStateMachine( 1232): TetherMaster - unhandledMessage: msg.what=3
05-12 00:02:19.270 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-12 00:02:39.320 E/Tethering( 1232): Error listing Interfaces :java.lang.IllegalStateException: Cannot communicate with native daemon to list interfaces
05-12 00:02:39.430 E/WifiService( 1232): Error configuring interface tiwlan0, :java.lang.IllegalStateException: Expected code 213, but got 600
05-12 00:02:39.430 E/SoftapController( 1217): Softap already stopped
05-12 00:02:41.670 E/wpa_supplicant( 1691): Error: failed to initialize Utility Adapter interface...
05-12 00:02:41.680 E/wpa_supplicant( 1691): Failed to initialize driver interface
05-12 00:02:49.290 E/Tethering( 1232): Error listing Interfaces :java.lang.IllegalStateException: Cannot communicate with native daemon to list interfaces
05-12 00:02:52.800 E/ActivityManager( 1232): ANR in com.android.settings
05-12 00:02:52.800 E/ActivityManager( 1232): Reason: Broadcast of Intent { act=android.net.wifi.WIFI_STATE_CHANGED flg=0x10000000 cmp=com.android.settings/.widget.SettingsAppWidgetProvider (has extras) }
05-12 00:02:52.800 E/ActivityManager( 1232): Load: 1.21 / 1.75 / 0.8
05-12 00:02:52.800 E/ActivityManager( 1232): CPU usage from 13580ms to 3600ms ago:
05-12 00:02:52.800 E/ActivityManager( 1232): mmcqd: 10% = 0% user + 9% kernel
05-12 00:02:52.800 E/ActivityManager( 1232): system_server: 8% = 3% user + 4% kernel / faults: 44 minor
05-12 00:02:52.800 E/ActivityManager( 1232): com.js.Error: 1% = 1% user + 0% kernel / faults: 14 minor
05-12 00:02:52.800 E/ActivityManager( 1232): m.android.phone: 0% = 0% user + 0% kernel / faults: 4 minor
05-12 00:02:52.800 E/ActivityManager( 1232): kondemand/0: 0% = 0% user + 0% kernel
05-12 00:02:52.800 E/ActivityManager( 1232): vold: 0% = 0% user + 0% kernel / faults: 4 minor 1 major
05-12 00:02:52.800 E/ActivityManager( 1232): e.process.gapps: 0% = 0% user + 0% kernel
05-12 00:02:52.800 E/ActivityManager( 1232): logcat: 0% = 0% user + 0% kernel
05-12 00:02:52.800 E/ActivityManager( 1232): +ksdiorqd: 0% = 0% user + 0% kernel
05-12 00:02:52.800 E/ActivityManager( 1232): +tiwlan_wifi_wq: 0% = 0% user + 0% kernel
05-12 00:02:52.800 E/ActivityManager( 1232): TOTAL: 28% = 8% user + 19% kernel + 1% iowait
05-12 00:02:56.590 E/WifiHW ( 1232): Supplicant not running, cannot connect
05-12 00:03:01.600 E/WifiHW ( 1232): Supplicant not running, cannot connect
05-12 00:03:06.610 E/WifiHW ( 1232): Supplicant not running, cannot connect
05-12 00:03:08.790 E/WifiService( 1232): Failed to unload Wi-Fi driver.
05-12 00:03:29.270 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-12 00:04:19.340 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-12 00:04:39.400 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring

05-12 00:01:59.180 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-12 00:02:09.190 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-12 00:02:09.460 E/WifiService( 1232): Error configuring interface tiwlan0, :java.lang.IllegalStateException: Expected code 213, but got 600
05-12 00:02:09.480 E/SoftapController( 1217): Softap already stopped
05-12 00:02:10.740 E/wpa_supplicant( 1666): Set_key: Wrong Key
05-12 00:02:10.740 E/wpa_supplicant( 1666): Set_key: Wrong Key
05-12 00:02:10.740 E/wpa_supplicant( 1666): Set_key: Wrong Key
05-12 00:02:10.740 E/wpa_supplicant( 1666): Set_key: Wrong Key
05-12 00:02:10.940 E/wpa_supplicant( 1666): prepare_filter_struct: type=0
05-12 00:02:11.000 E/wpa_supplicant( 1666): prepare_filter_struct: type=1
05-12 00:02:11.040 E/wpa_supplicant( 1666): prepare_filter_struct: type=3
05-12 00:02:11.290 E/HierarchicalStateMachine( 1232): TetherMaster - unhandledMessage: msg.what=3
05-12 00:02:19.270 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-12 00:02:39.320 E/Tethering( 1232): Error listing Interfaces :java.lang.IllegalStateException: Cannot communicate with native daemon to list interfaces
05-12 00:02:39.430 E/WifiService( 1232): Error configuring interface tiwlan0, :java.lang.IllegalStateException: Expected code 213, but got 600
05-12 00:02:39.430 E/SoftapController( 1217): Softap already stopped
05-12 00:02:41.670 E/wpa_supplicant( 1691): Error: failed to initialize Utility Adapter interface...
05-12 00:02:41.680 E/wpa_supplicant( 1691): Failed to initialize driver interface
05-12 00:02:49.290 E/Tethering( 1232): Error listing Interfaces :java.lang.IllegalStateException: Cannot communicate with native daemon to list interfaces
05-12 00:02:52.800 E/ActivityManager( 1232): ANR in com.android.settings
05-12 00:02:52.800 E/ActivityManager( 1232): Reason: Broadcast of Intent { act=android.net.wifi.WIFI_STATE_CHANGED flg=0x10000000 cmp=com.android.settings/.widget.SettingsAppWidgetProvider (has extras) }
05-12 00:02:52.800 E/ActivityManager( 1232): Load: 1.21 / 1.75 / 0.8
05-12 00:02:52.800 E/ActivityManager( 1232): CPU usage from 13580ms to 3600ms ago:
05-12 00:02:52.800 E/ActivityManager( 1232): mmcqd: 10% = 0% user + 9% kernel
05-12 00:02:52.800 E/ActivityManager( 1232): system_server: 8% = 3% user + 4% kernel / faults: 44 minor
05-12 00:02:52.800 E/ActivityManager( 1232): com.js.Error: 1% = 1% user + 0% kernel / faults: 14 minor
05-12 00:02:52.800 E/ActivityManager( 1232): m.android.phone: 0% = 0% user + 0% kernel / faults: 4 minor
05-12 00:02:52.800 E/ActivityManager( 1232): kondemand/0: 0% = 0% user + 0% kernel
05-12 00:02:52.800 E/ActivityManager( 1232): vold: 0% = 0% user + 0% kernel / faults: 4 minor 1 major
05-12 00:02:52.800 E/ActivityManager( 1232): e.process.gapps: 0% = 0% user + 0% kernel
05-12 00:02:52.800 E/ActivityManager( 1232): logcat: 0% = 0% user + 0% kernel
05-12 00:02:52.800 E/ActivityManager( 1232): +ksdiorqd: 0% = 0% user + 0% kernel
05-12 00:02:52.800 E/ActivityManager( 1232): +tiwlan_wifi_wq: 0% = 0% user + 0% kernel
05-12 00:02:52.800 E/ActivityManager( 1232): TOTAL: 28% = 8% user + 19% kernel + 1% iowait
05-12 00:02:56.590 E/WifiHW ( 1232): Supplicant not running, cannot connect
05-12 00:03:01.600 E/WifiHW ( 1232): Supplicant not running, cannot connect
05-12 00:03:06.610 E/WifiHW ( 1232): Supplicant not running, cannot connect
05-12 00:03:08.790 E/WifiService( 1232): Failed to unload Wi-Fi driver.
05-12 00:03:29.270 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-12 00:04:19.340 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-12 00:04:39.400 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-12 00:05:59.500 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring
05-12 00:06:09.430 E/Tethering( 1232): attempting to remove unknown iface (usb0), ignoring

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Holy cow batman - you should at least put that in code braces, usually logs are attached or linked to another site like pastebin.... ;).

I see a lot of issues, I'm just not sure "why". I'll try to get an answer for ya.

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Wow. I didn't realize how bad it was. adb provided no site as a link. Thank you for all your help. Also, if you are wondering I do have a MAC address.

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

Eh? adb wouldn't provide a site for you... either dump the logs to a file and attach them, or use pastebin.com, etc.

Did you remove the MAC? Is the MAC being detected correctly?

Also, are you still trying this on GB? Can you at least try Froyo? This build still has a lot of bugs - not that the Froyo one doesn't, they're just much fewer ;).

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

I noticed in the log it says "fails to unload wifi driver" is that the error?
Recommend any build or kernel I should try out? I am on Android 2.2.2.

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

The one I already recommended to you, that I thought you were already running perhaps?

FRX06.

Please don't make this any more difficult than it needs to be. So far we've filled almost 3 pages and gotten nowhere, and I've already recommended this to you once before... Hence the reason I thought you were on it already, I asked you to test wifi on it....

Re: [BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
 

I know and I appreciate your help these past few days. But I have mentioned on the previous page that:

It is Andorid Version 2.2.2
Kernel Version- 2.6.27.46-01318-g4ff4420
Build- FRX06
I will try the build that you have posted, in case it has a different kernel that the one that I am currently using.