Help stuck in bootloading screen

[accurato]

yes i have tried to relock and unlock even tried Raphael_CDMA_HSPL_037 again with no luck. when i try the nbh from Hermann_C_SPRINT_WWE_1.03.651.3_RS1.03.15F_SPCS_1. 53_PRL6063_Ship.exe
by renaming it i get an error on the loading screen 00028002 not allow then it goes back to tri colour screen. when I try to load from the pc via usb it gets to 1% then shut's down and goes back to tri colour screen. Last time around i was getting corrupt file error's on the Raphael_CDMA_HSPL_037 instead of the usuall hang on loading screen. Although it seems sync. my computor does not recongnise the phone but the loaders seem to find the unit i am using vista 64 bit, and have installed all the drivers that are needed.

[darren.wlsn1]

Originally Posted by accurato

yes i have tried to relock and unlock even tried Raphael_CDMA_HSPL_037 again with no luck. when i try the nbh from Hermann_C_SPRINT_WWE_1.03.651.3_RS1.03.15F_SPCS_1. 53_PRL6063_Ship.exe
by renaming it i get an error on the loading screen 00028002 not allow then it goes back to tri colour screen. when I try to load from the pc via usb it gets to 1% then shut's down and goes back to tri colour screen. Last time around i was getting corrupt file error's on the Raphael_CDMA_HSPL_037 instead of the usuall hang on loading screen. Although it seems sync. my computor does not recongnise the phone but the loaders seem to find the unit i am using vista 64 bit, and have installed all the drivers that are needed.

ya i think your bricked but maybe someone can prove me wrong. (i hope)

[accurato]

I hope so also. Thank you for your help i was hopeing that i could reload the complete operating system from scratch

[accurato]

I think i might have messed up the operating system by trying 6.5 gsm insted of 6.5 cdma is there a way to reverse this.

[mwalt2]

What exactly did you try to do that caused the problem? Links and filenames would be helpful. If you tried to unlock your CDMA phone with the GSM unlocker, you are bricked. If you tried to flash a GSM radio or a GSM ROM containing a radio to your CDMA phone, you are bricked. Other then that, I don't now of a way to end up bricking your phone (other than hardware issues).

[accurato]

iunlocked the phone using Raphael_CDMA_HSPL_037 that went fine. Then i flashed from bell to sprint because im moving that went fine also. The issues stated when i flashed it the third time " should have quit after the 2nd". I flashed it using WinMo6.5(Build 23529)_plusExtras that was the mistake i now know it was gsm and the phone is cdma. The phone is in a loop touch pro starts's then it reboot's. I can get it into the boot screen, cannot acess the phone via the comp but it does sync. I have tried

Hermann_C_SPRINT_WWE_1.03.651.3_RS1.03.15F_SPCS_1. 53_PRL6063_Ship.exe
MightyROM6_Herman
Raphael_CDMA_Relocker
SPRINTRELOCKER
task29 Sprint TP Radio V1.03.15F Shipped R
task29 VZW Raphael Shipped rom v1.03.03v R
task 29 with splash screen
Bell Stock ROM TP

if i use the sd card it just hangs on the loading screen if i use the comp. i get to screnn, the current information about your PDA phone and my image Version is blank. I choose update pick the version that's listed and it sync's up, get's to 1% then reboots putting the phone back into the toch pro link loop. On the comp. I get ERROR(294): Invalid vendor id.
Any help would much appreciated .

[mwalt2]

Originally Posted by accurato

iunlocked the phone using Raphael_CDMA_HSPL_037 that went fine. Then i flashed from bell to sprint because im moving that went fine also. The issues stated when i flashed it the third time " should have quit after the 2nd". I flashed it using WinMo6.5(Build 23529)_plusExtras that was the mistake i now know it was gsm and the phone is cdma. The phone is in a loop touch pro starts's then it reboot's. I can get it into the boot screen, cannot acess the phone via the comp but it does sync. I have tried

Hermann_C_SPRINT_WWE_1.03.651.3_RS1.03.15F_SPCS_1. 53_PRL6063_Ship.exe
MightyROM6_Herman
Raphael_CDMA_Relocker
SPRINTRELOCKER
task29 Sprint TP Radio V1.03.15F Shipped R
task29 VZW Raphael Shipped rom v1.03.03v R
task 29 with splash screen
Bell Stock ROM TP

if i use the sd card it just hangs on the loading screen if i use the comp. i get to screnn, the current information about your PDA phone and my image Version is blank. I choose update pick the version that's listed and it sync's up, get's to 1% then reboots putting the phone back into the toch pro link loop. On the comp. I get ERROR(294): Invalid vendor id.
Any help would much appreciated .

Flashing a GSM ROM with no radio will not brick your phone. I've done it before when I forgot to change OEMXIPKernel from a GSM to CDMA in a ROM I built once. It did the constant reboot thing. I just put it in bootloader (hold vol. down and push/hold the power button), connected to usb, and flashed a new ROM. Most kitchens these days make it pretty hard to put a radio in the ROM. Where did you get "WinMo6.5(Build 23529)_plusExtras"? I googled it and all I get is a bunch of torrents.

Have you tried unlocking your phone again? I would 1) re-lock 2) flash a shipped rom from whatever carrier branded the phone 3) unlock with proper unlocker 4) try to flash a custom ROM.