Cricket Full flashTouch Pro Tutorial Updated 1/27/2010

[whitey10tc]

**NOTE******************************************** ****
IF YOU ARE IN A CRICKET AWS MARKET YOUR DEVICE MAY NOT WORK
************************************************** ****

** Your device your actions you brick it it's your problem**


1st off credit is due to those that wrote these programs I only take credit for putting this all together.

Install the following before anything else http://justpctech.com/PPC/NETCFv35.wm.armv4i.cab (thanks edru)

#1 use msl grabber to get the msl/spc code found here
http://forum.ppcgeeks.com/showthread.php?t=43560
install via activesync or sd card and run on ppc.

#2 unlock with the unlocker listed here
http://forum.ppcgeeks.com/showpost.p...08&postcount=1
Read and follow the direction. VERY IMPORTANT!

#3 flash this sprint 6.1 ROM to update radio "WARNING DO NOT LET CUSTOMIZATION RUN" SOFT RESET WHEN IT SAYS AUTO CUSTUMIZATION IN 3 SECONDS. This is for GPS1 to work.
http://rapidshare.com/files/17615341...3_Ship.exe.zip
To do this connect USB to computer then get to bootloader red green yellow screen and connect to cable then run the exe file. DO NOT LET CUSTOMIZATION RUN SOFT RESET WHEN IT SAYS CUSTOMIZE IN 3 SECONDS.
After this point you may need to run the unlocker again.

#4 Go to the following and download
QPST and windows htc driver http://www.4shared.com/file/15364011...m_Drivers.html
activesync4.5 http://www.4shared.com/file/10189370...actsync45.html
Vista users will need this driver (Thanks to Sergey123456 from XDA)
Install QPST on computer
Install htc drivers on computer
Install Activesync 4.5 on computer
Put phone into diag ##3424# or (snd) mode & connect to computer. computer should connect and find new device
run QPST configururation and add new port till you find your phone.
Now in QPST run from top menu start clients service programing.
Select phone
Read from phone imput spc/msl code from the grabber.
Then enter 000000 in the service programing field.
Write to phone
now while in QPST lets get your GPSone set up for cricket.
Go to the GPS1 tab and uncheck all the boxes then recheck them.
then enter the following
pde ip address 209.210.15.72
pde port # 8888
pde transport IP
Position calculation mobile
Write to phone
close out
Do the following GPS Registry edits after installing desired ROM:
"HKLM\SOFTWARE\HTC\SUPL AGPS"
"GPSMode" value="2"
"ServerPort" value="8888"
"ServerIP" value="209.210.15.72"

I would recommend now to flash a custom ROM

You will need a cricket PRL to load http://www.megaupload.com/?d=GTWTR4I5 http://howardforums.com/showpost.php...43&postcount=1

then go to post #28 it will help you set up your pst setting correctly.
YOU CAN ALSO DOWNLOAD THE MMS CAB FROM HERE and then
Install the cricketwapmms cab
Do not try to open a data connection untill you have cricket service on the phone.
To authinticate your user name 10digit#@mycricket.com
you must have service.



If you are having issues with the orinal carrier setting reverting back try looking through these addtional QPST setting.

Please read the entire thread before posting Questions it may have been answered already and if it has I will only reference you to that post number.