Replacement Won't Dance

[Seriously]

Originally Posted by num5kull27

good luck bro and if still not fixed,post the exact issue that you keep having

Originally Posted by awol

Hadn't heard of "flash dance" before, but a quick search said "flash to stock,HR,flash to custom rom,HR"...

All those steps have been performed in one fashion or another. But, I'll
give it a full try and report back.

Just a reminder that the HR your refering to (hard reboot) doesn't work on VZW units, wether they are running on Sprint or not. The only way you can do that is if you have a booted device that has the clear storage function. The button dance doesn't work on vzw phones.

[Mylt1]

HR does work on VZN phones. it is the center button and the soft reset. press the center button strait down and hold without pressing either other way and press and hold the SR button and hold. it will come up with press vol up to restore to factory defaults.

[Seriously]

Originally Posted by Mylt1

HR does work on VZN phones. it is the center button and the soft reset. press the center button strait down and hold without pressing either other way and press and hold the SR button and hold. it will come up with press vol up to restore to factory defaults.

Thanks your absolutly right....tried sev to do this and others read....you explination worked thou...

Thanks buttons pressed!

[junior1234]

Originally Posted by Seriously

Well I tried both but only the SD on Twisted and MaxDarkRoot....I think I should try a lower PP to see if that is the issue. Do you think that could be it?

that very well could be an issue , I dont know exactly what the details were but many of the energyroms have been troublesome for verizon TP because of their lowered RAM

[awol]

Originally Posted by num5kull27

good luck bro and if still not fixed,post the exact issue that you keep having

Since I had already flashed back to stock, I just did a hard reset, then reflashed the custom ROM, and did another HR. Seems to be working - thanks!

[Straitup27]

Originally Posted by awol

Since I had already flashed back to stock, I just did a hard reset, then reflashed the custom ROM, and did another HR. Seems to be working - thanks!

glad your issue is solved friend!

[Seriously]

Well I think the answer is found. The vzw TP only has so much memory mapped for booting os....much like most divices....and because of the newer roms being mostly bigger and bigger .... a page pool of smaller and smaller will allow better boot. All that of course is just logical, but I never thought it wouldn't even boot. Seems that it will boot if pp set lower. On Lunacie's 'Lite' version I could boot with only 6mb pp, but not 10, 8 or 12.
Of course it is not very peppy.....lol

Anyway, thanks to all who helped, and especially for the hard reset info (I swear I looked at 2 or 3 Lonnnnnngggg threads arguing this point for vzw tps, and I personally could never get it to work).

So, short answer is: If the forkin thing won't boot, try ppchanger and bring down a notch or two....