PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Touch Pro 2 (http://forum.ppcgeeks.com/forumdisplay.php?f=97)
-   -   [UPDATED] Sprint TV 100% working (http://forum.ppcgeeks.com/showthread.php?t=96207)

japper88 11-19-2009 01:34 PM

Re: [UPDATED] Sprint TV 100% working
 
Quote:

Originally Posted by Juggalo_X (Post 1343712)
have you tried the prl updater? feedback?

Thanks again, the PRL and Profile update both seem to work. I run them and it says they work. Honestly I am not sure what they do to begin with but it looks and acts like the PRL and Profile updates from the stock rom, so I am assuming they work.

I haven't received any calls yet so I can't comment on whether the state ID thing is fixed, I'll post after someone calls me. (It definitely wasn't working before I installed your provisioning cab)

Any idea why the MMS update won't install? It say something about having insufficient privileges to do so.
EDIT: maybe I'm a retard, I need to disable manila first right? I'll give that a shot in a bit and post the results.

Mr. X 11-19-2009 01:43 PM

Re: [UPDATED] Sprint TV 100% working
 
Quote:

Originally Posted by japper88 (Post 1343759)
Thanks again, the PRL and Profile update both seem to work. I run them and it says they work. Honestly I am not sure what they do to begin with but it looks and acts like the PRL and Profile updates from the stock rom, so I am assuming they work.

I haven't received any calls yet so I can't comment on whether the state ID thing is fixed, I'll post after someone calls me. (It definitely wasn't working before I installed your provisioning cab)

Any idea why the MMS update won't install? It say something about having insufficient privileges to do so.
EDIT: maybe I'm a retard, I need to disable manila first right? I'll give that a shot in a bit and post the results.

it wont install because your rom probably already included Arcsoft MMS and it wont allow you to over write it because of system policies.


Call ur cell from your house. iev had it tested it works now :) had a fellow staff member test.

fishingmedic 11-19-2009 01:50 PM

Re: [UPDATED] Sprint TV 100% working
 
Jugg, any idea why the playback is sometimes very choppy watching nfl? Even with a good signal it's still sporadic, like it's not buffering, etc, very pixelated at times. I'm on MM ROM. Are there changes that can be made for that on our end?

japper88 11-19-2009 02:00 PM

Re: [UPDATED] Sprint TV 100% working
 
Quote:

Originally Posted by Juggalo_X (Post 1343791)
it wont install because your rom probably already included Arcsoft MMS and it wont allow you to over write it because of system policies.


Call ur cell from your house. iev had it tested it works now :) had a fellow staff member test.

Ah, that makes sense, the version of EnergyRom I have I think already does come installed with Arcsoft MMs, since Sprint MMS was already working "out-of-the-box" with the release I was using.

I'd totally call myself if I had a land line, haha. I think I'm just going to call a friend at lunch and have them call me back, haha.
Update: So the sprint provisioning cab definitely fixes the broken state id thing for me. Awesome, thanks again.

julez456 11-19-2009 11:36 PM

Re: [UPDATED] Sprint TV 100% working
 
This might be a stupid question and excuse my ignorance if it is but will this work on a T-Mobile US TP2? The reason I ask is because I also own a T-Mobile G1 (USA) and the devs in xda were able to port a bunch of Sprint apps over to the G1 and MyTouch/Magic. One of the apps being SprintTV. I have all the Sprint apps (Sprint NFL, Sprint Nascar, Sprint Navigation) working on my G1. The only one that isn't working anymore is SprintTV because Sprint was apparently able to patch whatever it was that made it possible for the devs to port it over to T-Mobile phones.

So, if anyone can tell me if this will work on my T-Mobile US TP2 I would greatly appreciate it. Thanks.

japper88 11-19-2009 11:52 PM

Re: [UPDATED] Sprint TV 100% working
 
Quote:

Originally Posted by julez456 (Post 1345761)
This might be a stupid question and excuse my ignorance if it is but will this work on a T-Mobile US TP2? The reason I ask is because I also own a T-Mobile G1 (USA) and the devs in xda were able to port a bunch of Sprint apps over to the G1 and MyTouch/Magic. One of the apps being SprintTV. I have all the Sprint apps (Sprint NFL, Sprint Nascar, Sprint Navigation) working on my G1. The only one that isn't working anymore is SprintTV because Sprint was apparently able to patch whatever it was that made it possible for the devs to port it over to T-Mobile phones.

So, if anyone can tell me if this will work on my T-Mobile US TP2 I would greatly appreciate it. Thanks.

I am pretty sure you need a Sprint signal for SprintTV to work. It wouldn't work for me on wifi, it gave me a warning saying I needed to be on the Sprint network. Anyway, the G1 is android and all these are winmo cabs.

julez456 11-20-2009 12:01 AM

Re: [UPDATED] Sprint TV 100% working
 
Quote:

Originally Posted by japper88 (Post 1345829)
I am pretty sure you need a Sprint signal for SprintTV to work. It wouldn't work for me on wifi, it gave me a warning saying I needed to be on the Sprint network. Anyway, the G1 is android and all these are winmo cabs.

Yea I am aware that the G1 is android and these are winmo cabs but I have both..a G1 and a T-Mo TP2. I was just wondering if the SprintTV cab would work on my T-Mo TP2 being that we were able to get Sprint apps to work on our T-Mobile G1's.

japper88 11-20-2009 12:07 AM

Re: [UPDATED] Sprint TV 100% working
 
Quote:

Originally Posted by julez456 (Post 1345862)
Yea I am aware that the G1 is android and these are winmo cabs but I have both..a G1 and a T-Mo TP2. I was just wondering if the SprintTV cab would work on my T-Mo TP2 being that we were able to get Sprint apps to work on our T-Mobile G1's.

Ah, okay. SprintTV definitely needs the Sprint network. That's the reason us Sprint users had to wait for something like Mr. X's Sprint Provisioning cab to get SprintTV working.

clarkm 11-20-2009 12:46 AM

Re: [UPDATED] Sprint TV 100% working
 
Quote:

Originally Posted by lefty11 (Post 1328696)
hi, awesome job getting Sprint TV running. thanks again. I have one issue that I have not seen posted so I am unsure what may have caused it. Beforer running the prov cab and the prl cab I had 2 email accounts. One was an outlook exchange account , the other a pop 3 ISP account
(roadrunner) after installation and sprint tv working, I was getting the bootsrap device id error (running MM rom) i did a hard reset and restore, then reinstalled without the prl cab.
now on the today screen where the messaging icons are, i show my mail as normal. ican even slide thru the "3d" messages displayed but when I try to open one of the roadrunner emails from the 3d letter view , or go to the inbox for the roadrunner account, it does nothing, and no longer shows up on my mail accounts where you normally go to setup, etc. I went ahead and readded the same mail accout under a different name and it works fine now, but the problem is I still have an extra envelope icon on the messaging screen and it shows the number of messages in my inbox although I cannot access it. Where can I go within registry to delete that account specifically as i cannot do it under mail accounts? I already have rebuilt the account with different name so I really only somehow need to delete the old one so it does not show up on the messaging screen anymore, Can someone help? I dont know if anyone else had this issue, but hopefully someone can give me a directory location or edit that I can use to delete the old account. Thanks


i have this same exact problem. i was using a single gmail account and after installing this when i clicked on the 3d envelope it did nothing.... i re-added the account just as he did and now have 2 gmail folders! i can only access one however. can someone please help? where do i need to edit the registry? thanks in advance

Mr. X 11-20-2009 12:48 PM

Re: [UPDATED] Sprint TV 100% working
 
Guys i have this same issue, now sure where it cropped up but its not the cabs, they set nothing at all related to email, the email inbox or any settings.

its something in the rom. mine included. thats causing the xmls not to set correctly


All times are GMT -4. The time now is 03:10 PM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0