Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

So whick one is louder?
Badboy did his without a tp2 so he wasn't sure

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

Does anyone have the stock (Sprint) Audiopara.csv? I'm running a custom ROM where the volume is already raised and I want to go back to stock settings.

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

Okay, now how to make the speakerphone quieter than stock (VZW)?

I tried tweaking the rXCodecGain and rxVolume of the HANDSFREE rows down to 0000, but it's still as loud as stock.

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

I have AT&T's Tilt 2 and my volume is pretty low (even on the highest setting) whenever I'm on a call, either speakerphone or just plain handset to ear.

I've tried an audipara file from somewhere else (xda developers) and it didn't seem to help.

Anybody have any luck with this on AT&T's Tilt 2? Anybody have the original Audiopara file? I wanna go back to the original and then go from there and compare to others.

Thanks!

Maria

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

I have t-mobile htc touch pro 2(WM 6.1). And earpiece volume is to low for me.
Can I apply those files BB edited for sprint/verizon version to my tp2? Are there any differences?
I did a search in windows folder on my phone and found this:
1. AudioPara.csv 11.1 k
2. AudioPara3.csv 118.6 k
3. AudioPara3_ATT.csv 118.6 k
4. AudioPara3_Boot.csv 1.4 k
5. AudioPara3_TMO.csv 118.6 k
I don't know which audiopara i should consider.
Is it possible for you to review files if I'll send someone them?
I will be appreciate for helping me out with this.
Thank you.

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

OK here I go. Where do I begin. Have Sprint and not Verizon, so it's not just a VZ issue. Using stock ROM. All these "fixes" do not fix crap on my phone. Don't know how they are working on anyone's phone really! Tried to copy and replace the Audiopara file and reset. Did not work, and yes I did it right. Tried each and every cab here, and reset. Did not work. Tried the reg edits, reset. Did not work. Before trying each and every one the phone was put back to original configuration. No plastic over earpiece volume either. Pulled tape in back off as a few have suggested. Did not help. Family and co-workers agree it does not turn up earpiece volume, so it's not just me. Don't think I have a "defective" phone cause this phone works fantastic and have had no issues with it!!! I am starting to believe there is no cure for the low earpiece volume! It is better than the regular TP but not leaps and bounds. If anyone can figure this out where it works for me, I'll happily make a donation to you!

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

Me too, tried all of these and didn't get a volume increase on my Sprint TP2. I would like a little more volume (can always turn it down). If anyone has a cab that actually worked and will post it I would like to try again.

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

Not sure what to say, as the cab works on my phone and others. Like I've said before, it's a subtle difference.

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

i have a sprint TP2 and i can tell a difference with the two cabs i posted. YMMV. if it is not working for you then i would suggest doing a google website search on audiopara on xda and here to learn our to edit the files yourselves!

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

Been there done that for hours on end. Some files messed up the phone so as to the point it would not make or receive calls. Reverted back to before each time and phone works just like normal. Just going to face facts the earpiece volume increase does not work for me. I don't care about a speakerphone volume increase, it's loud enough. I would care about it I suppose if it was included in with an earpiece volume increase as well. But again, don't believe this will work for me. I need someone with a whole different approach to solve this apparently. Something I haven't tried. Thanks for the help guys.

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

Then it really didn't work heh??? You should be able to turn your volume down halfway on a call and have it very loud already. Get in a noiser environment ie. sirens sounding, and have plenty left to turn up. It should take your head off. My flip phones I had in the past would do that. Rugged Sanyo, Motorola. I really like the TP2 for all the capabilities for my line of work (paramedic) Has great calculators, calendars etc, not to mention the eMedic program I have on my phone. Try doing all that with some ruggedized flip phones! Doens't compare! In call volume, urrggghhh!!! Guess I will have to just text my patient reports into the hospital! haha

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

Got it working! Thought I was going to have to hard reset but I found out I had some reg. edits I tweaked for InCall areas a couple of months ago I forgot to set back to original. For this reason I guess, copying the zip files and doing the cabs it was not allowing them to go through and work! Odd!!! Maybe my phone does have some issues then. Well, I tried the 2 zip audiopara file in badboys original post and it works like a charm! Much louder now but slightly distorted on full blast. I can live with that though. Now I can turn it down to half way (which is about normal highest volume before) and can boost it up when I need to. Folks, if this doesn't work for you, check your registry. Maybe it was tweaked and forgot like me and your phone is not allowing any new changes to process! Thanks badboy! You saved me from going back to the old flip phone!

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

Okay, what's the consensus? Use the registry edits, or one of the files from the first post? I'm mostly interested in higher bluetooth volume because I work in a noisy environment, but louder ring tone would be nice as well.

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

ive tried both on htc touch pro 2 at 6.5 and previous on sprint and no difference on either one. this is blue tooth to audi s5. it is terrible volume. i can't use BT when i drive about 50 mph b/c it is way too quiet.

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

I have a question and HOPE someone can help me out [-o<

Anyways i've had the Audiopara2 boost installed and all is well, at least until i tried to use a set of 3.5mm headphones to listen to mp3's and i had NO sound. In fact i had no sound at all of any kind after i tried to listen to music with my headphones. So i did a soft reset and uninstalled the audio boost and again soft reset and then all was great and working fine. To test, i installed the audiopara boost file again and tried listening to my music and again had NO sound. So it seems i can either have the boost installed and have my phone earpiece and speaker volume working but no music, OR i can have it uninstalled and listen to my music and have LOW earpiece volume etc.

Why is this and can it be fixed so i can have both?

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

BUMP....anyone read these things?

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

My condolences. I have also had no luck with these changes since I think the file lives in ROM and gets replaced with every reboot.

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

I think this should fix that problem. Check the file date to verify that the file is being replaced.

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

Hey guys I used the boost cab from the original post , but since I updated to 6.5 stock rom ...the volume is low.

How can I get my volume to the highest with the cabs. Do I need to install in a special folder or do i just install to device and restart the phone?

Please help. Thanks a bunch!!!

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

any answer as to why this boost makes it so headphones don't work? see my post above for more info. This is driving me nuts that i can't have this audio boost installed and still be able to use headphones.

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

I'm going to look into this, just give me some time though. I got a handful of other stuff I'm busy with atm...

Everyone, sum up what works and what doesn't work with these tweaked audiopara cabs. So far, I see 3.5 headphones not working. Does the voume control work fully?

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

You might be the only one to have this problem. It's specific to your device.

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

Headphones not working for me to after installing this and for some reason i cant delete the AudioPara3.csv file using total commander

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

rename it to AudioPara3.csv.old and that should do the trick to revert back.

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

Thanks but thats not working to.

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

you have to use resco explorer then.

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

I remember that there was a limit on the sound level encoded in the WM6 - apparently due to some French regulation they had to meet (although why would they impact every single device is beyond me). Anyway, when using the utility to boost pre-amp on Axim above what the default system allowed for, the headphones would go mute unless I reduced the volume to a certain point.

Re: TWEAKED Audiopara.csv louder earpeice, spkphone, and BLUETOOTH!
 

Just got my TP2 and the damn earpiece volume sucks big time. I tried the cabs, but nothing seems to help. They do help a tad, but nothing like the audiopara I had for the vogue. Would I be able to install the audiopara I used on the vogue, on my tp2?