Speaker volume (quiet then loud)
Is anyone noticing that after the unit sits, the first sound is plays through the speaker (IE: a key tone) is very quiet. Right after the initial sound byte is played through the speaker it then gains the correct volume as in your volume settings.
I am having a bit of trouble hearing my email notification as it only beeps once. It is abnormally quiet despite my volume settings. Can anyone confirm this? Try playing with the ring tone alerts, the first one may be really quiet and the subsequent tone will play as it should. |
Re: Speaker volume (quiet then loud)
yup happens to mine too odd
|
Re: Speaker volume (quiet then loud)
thanks for confirming.. good to know im not alone on this one.
|
Re: Speaker volume (quiet then loud)
Same here, I also notice this when using the on screen dialer...weird.
|
Re: Speaker volume (quiet then loud)
Quote:
|
Re: Speaker volume (quiet then loud)
Quote:
|
Re: Speaker volume (quiet then loud)
Quote:
|
Re: Speaker volume (quiet then loud)
This may have something to do with a power management setting. When you get a message the device has to wake up a little before it plays the new message tone. I would suggest changing the notification tone to a longer one. This may help. This has happened to me every once and a while but not always. I have mine set to vibrate on this notification regardless and that def helps to get my attention. You could try disabling some of the power management settings in the registry one by one and see if any have an effect but you may notice a negative effect on battery life.
|
Re: Speaker volume (quiet then loud)
It does the same thing when you play bubble breaker, sometimes the 'pop' sound will be very low in volume, then the next time it will play at normal volume.
|
Re: Speaker volume (quiet then loud)
Quote:
|
Re: Speaker volume (quiet then loud)
^bump^ ..just so this doesnt get lost :)
I also noticed that this issue occurs during every sequence of ring during an incoming call. Using Ring-Standard3 |
Re: Speaker volume (quiet then loud)
Quote:
(i may also be having the same behavior with missing the first part of notification sounds when coming out of sleep, but i am still in the process of choosing tones and volume levels, so I hadn't started to worry just yet.) |
Re: Speaker volume (quiet then loud)
Quote:
I have a feeling there will be a fix soon enough though. |
Re: Speaker volume (quiet then loud)
I'm really hating that it goes from quiet to loud...its rather a big problem for me because aside from the calls (because it lasts for awhile), I miss most of my other notifications because it's so dam quiet. (I thought the speaker system was top notch on this thing!!!!)
Is there ANY fix to this at all? |
Re: Speaker volume (quiet then loud)
i noticed when i disabled voice command it stopped doing this to me not sure if it was a luck or what but with it disabled my phone does not do the loud toquiet thing you all have trouble with
|
Re: Speaker volume (quiet then loud)
Wow, psychological? I don't know. I went ahead and disabled VC and it does seem to solve the problem. Will report again in an hr or so to see if it really did fix
UPDATE: Apparently it goes on and off..I guess it worked somewhat but not entirely. At times, sounds would play at full volume immediately but not always |
Re: Speaker volume (quiet then loud)
Some of my ringers play at low volumes and some higher but they dont sound like the volume is all the way up. I can play them in WMP and they are loud. I didnt notice at first cause I didnt change the ringers/alerts. Annoying
Edit:I have a music ringer I made set for incoming calls and the volume is very low. I used the same ringer and set it for new texts and it sounds like it should,loud. |
Re: Speaker volume (quiet then loud)
Quote:
Glad you mentioned this. Keep me from having to...VC is causing this issue. Basically the volume lowers when the name is suppose to be announced. Seems as if VC is broken. As i enabled "announce calls with using bluetooth if available....I don't hear any name instead the low volume kicks in where name is suppose to play and then sound kicks back up for ringtone..Im not saying you have to use my method to repeat issue but yes VC is definitely broken. |
Re: Speaker volume (quiet then loud)
Sounds like this should go in the defects thread.:(
|
Re: Speaker volume (quiet then loud)
It happens on my phone as well, notifications and in Bubble Breaker, and I never use voice command. It may be part of it, but that isn't the fix. :(
|
Re: Speaker volume (quiet then loud)
Im not using VC either. Just incoming call ringer volume is my problem,so far. Whats wierd is when I call from one of my other phones and then hang up, my tp2 volume jumps to full volume for a second.
|
Re: Speaker volume (quiet then loud)
Glad I'm not the only one with this problem. I thought I was going crazy there for a minute.
|
Re: Speaker volume (quiet then loud)
Quote:
|
Re: Speaker volume (quiet then loud)
Are you guys using stock ringers or ones you made and already had? Im going to redo some of mine and see if it changes anything. Possibly a corrupt file I hope.
|
Re: Speaker volume (quiet then loud)
I dont have this issue. However, when I make a phone call the first number on the dialer I hit is soft then it gets louder and stays loud. Also if I wait a good 5 or more seconds the next time I hit a key it will be soft again and then gets loud and stays loud unless I let it idle again. I think this is basicly a safty feature to keep your speaker from blowing. The speaker phone is really good on this but the incall volume freaking sucks
|
Re: Speaker volume (quiet then loud)
I'd rather have my speaker blow since I have insurance...cause of these "low to high" sounds, I always miss my email and text notifications.
All of my sounds are stock btw |
Re: Speaker volume (quiet then loud)
Quote:
|
Re: Speaker volume (quiet then loud)
Mine is stock, and it does have the "ascending" volume. When I use my speaker phone on a call, the rings go from soft to louder.
|
Re: Speaker volume (quiet then loud)
Quote:
|
Re: Speaker volume (quiet then loud)
Getting the same High to Low volume on speaker issue when receiving a phone call, or even just playing the ring-tone on my phone.
|
Re: Speaker volume (quiet then loud)
I too, have noticed this problem. Although I haven't paid enough attention to determine when exactly it happens. I'll try to pay more attention in an effort to assist in troubleshooting.
|
Re: Speaker volume (quiet then loud)
Ok. I just hard reset my phone about four hours ago and am just now getting around to setting up the e-mail again. While I'm using the phone, actually while I was TYPING, a text came in, and it was low, then got louder. Is it possible that escalating tones are enabled on everything? Of course, the escalation was much faster than it is when the ringtone is set to escalate.
|
Re: Speaker volume (quiet then loud)
And the plot thickens...
On my way home, I had my Motorola T505 connected via Bluetooth to my TP2. Pressing the button on the T505 makes Voice Command kick in. The Voice Command prompt was very low. I stated whom I wanted the phone to call. VC responded with the usual, "Call, John Doe?". But when it did, "call" was very low. "John Doe" was normal. Also, after I told it "yes", the quick DTMF sound you usually hear to indicate it's dialing isn't audible. There's definitely a problem here. My phone was plugged in to the cig lighter, on, and paired. |
Re: Speaker volume (quiet then loud)
I wonder if this is a problem for ALL TP2's...I'm on a sprint, what about you guys?
|
Re: Speaker volume (quiet then loud)
Quote:
|
Re: Speaker volume (quiet then loud)
I am Verizon. (And frustrated)
(On a side note, why is my carrier and phone not in my posts?) |
Re: Speaker volume (quiet then loud)
I just got my Verizon TP 2 today & it's doing the same thing (it is REALLY annoying)
I turned off the VC in the first 5 minutes I owned it as I never use it, so that's not the problem............. ~John |
Re: Speaker volume (quiet then loud)
Quote:
|
Re: Speaker volume (quiet then loud)
I am on sprint and have this issue as well. Lets ban together and get HTC to fix this lol. It is really annoying but not nearly as annoying as the fact that my speaker volum sucks.
|
Re: Speaker volume (quiet then loud)
What do we do? Shake our fists in the air until htc puts a fix out? This is the only thing I have a problem with.
P.S. I just saw a DQ commercial and now I need an oreo blizzard!!!!! |
All times are GMT -4. The time now is 01:47 AM. |
Powered by vBulletin® ©2000 - 2024, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com