Stuck on 0%
 

Hi people,
I was flashing different custom roms then all of a sudden after applying task29, my phone rebooted and got stucked on the 1st logo screen.Tried to flash different official roms + other cooked roms but the phone is still stucked on 0% and, on the loading screen when trying on sd card.

Tried to use the various commands on mtty to format/reset phone and reflash, but i'm still stucked at 0%. It seems that the phone doesn't want to load anything or must I flash using a specific version??? (tried to flash also using 8 official GSM roms, still nothing)

I'm really out of options now and since my phone is out of warranty from vodaphone UK, i can't send it back.

Can someone please guide me on how to revive my phone?

Re: Stuck on 0%
 

try putting your phone into bootloader and then flash from a pc.

Re: Stuck on 0%
 

yes, i already did that before, but once i start flashing, it is stucked at 0%.

Wirelessly posted (htc Pocket PC: Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 7.11) Sprint MP6950SP)

Pull the battery and wait a bit.
Then replace the battery and imediately push and hold the volume down button and while holding volume down push and hold the power button until you see bootloader. Then connect usb cable to your pc and flash the shipped exe rom for your carrier.

Before you start this download the original shipped exe rom for your carrier to your pc. Disable all firewall, anti-virus, and mal-ware protection on your pc and reboot your pc. Try using a different usb port on your pc and/or try a different usb cable.
Also, you might try flashing from a different pc. Good Luck! ;)

Re: Stuck on 0%
 

thanks horndoctor - i already did that before. Still no good regarding the flashing. I'm not finding which correct rom I can possibly flash to get my device working. I've already tried flashing with the v1.14.161.6 and v1.86.161.0 from vodafone uk as well as the latest wm6.5 from htc.

Re: Stuck on 0%
 

m your touch pro 2 when flashing through computer?

Re: Stuck on 0%
 

Flash this 6.1 rom here:
HTC Touch Pro2 - ROM Upgrade for HTC Touch Pro2 (Orange_UK)

Follow my instructions in my previous post. Or you could try flashing that shipped rom from your sd card.

Re: Stuck on 0%
 

+1 with Horndoctor's secondary method,op has not made mention of trying to flash from the sd card and as Horn says flashing the shipped rom from sd should work if having issues on pc

Re: Stuck on 0%
 

horndoctor, I have already tried to flash with vodafone uk's rom since my tp2 is originally from vodafone from my computer as well as from a 512mb/1/2/4/8gb card + also tried on a Windows XP/Vista computer, but none worked. I must add that I had previously flashed various cooked roms before and it was only after using Task 29 that the phone got stucked at the 1st logo screen.

Do you have any other suggestions?

Wirelessly posted (htc Pocket PC: Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 8.12; MSIEMobile6.0) Sprint T7380)

Try running task29 again or try running the unlocker again. :dontknow:

Re: Stuck on 0%
 

Tried using task29 + unlocker, still stucked. Phone does not want to flash anything it seems. I thought that as long as I can enter bootloader, I can flash anything but it seems that this might be the true bricked tp2? Task29 seems to have corrupted the bootloader or the spl thing?

Wirelessly posted (htc Pocket PC: Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 8.12; MSIEMobile6.0) Sprint T7380)

Hmm...
When you put it in bootloader and try to flash the shipped rom what happens exactly?
At any point did you try to flash a cdma shipped rom or the cdma unlocker? If so then there is your problem.
What does it say when you put it in bootloader?

Re: Stuck on 0%
 

When in bootloader, the progress bar appears normally but the screen remains frozen at 0% and on the "Loading" screen when trying to flash on sd card. About the cdma rom/unlocker, no I didn't try any of them.

Wirelessly posted (htc Pocket PC: Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 8.12; MSIEMobile6.0) Sprint T7380)

Ok
Can you post here what it says on screen when you put it in bootloader?

Are you sure your battery is charged?
Do you have a storage card in the slot while trying to flash from bootloader when connected to your pc? If so remove it then pull battery and replace battery then use button combo to put it in bootloader again and try flashing the shipped rom again.

Could you have a bad sim card?

Re: Stuck on 0%
 

Bootloader shows:
RHOD100 32M SS-BC
SPL-0.85.OliNex
MicroP(LED) 0x0A
MicroP(KEY) 0x04
TURBO HW/TURBO SW
TP MFG DATA

Everything seems normal on booloader though. I've tried 2 fully charged new batteries as well as tried with 3 usb cables and usb port from phone is working fine (serial-->usb when connected to computer). No storage card is present when flashing and sim card slot is not damaged since phone is as new condition without any physical damage to it. I also tried to remove the simcard to flash but zero progress so far.

Re: Stuck on 0%
 

I know that there are a lot of strange issues with the some cards working and some cards not working to flash from SD. Make sure it is formatted to Fat32 before copying a ROM to it. Stupid question but are you using the right CDMA vs. GSM version? Also, try redownloading the ROM, if it got corrupted in some way then it won't work (I had this happen to me with your same symptoms). Also, try to re-lock and then re-unlock, I've had that help too.

Re: Stuck on 0%
 

Try these 2 things:

1) if you're flashing from windows 7, try using XP

2) Flash just a different radio, without a ROM, see if the progress bar goes up.

3) Try another USB cable. charge your phone to 100% and try again.

4) refrigerate your phone for 30 minutes then try again (don't ask me why, but I have had this solve some problems)

Re: Stuck on 0%
 

Yes, already tried using different sd cards and i've downloaded a lot of roms to test - none flashed though. I can't re-lock and re-unlock since the phone itself is stucked at 0% when I try to flash anything. Can you share how did you manage to unbrick your phone?

Re: Stuck on 0%
 

Well I have had that happen multimple times but it wasn't really locked or bricked. Some of the reasons were trying from PC with card in, bad ROM etc, PC not really "detecting phone" in bootloader mode etc...

to be clear, without a card inside, connected with the original USB cable and activesync connecting to your phone in bootloader mode (in other words - your pc detects the phone even in bootloader and you can verify that in Device Manager) with USB printed at the bottom, you can't load anything without it going to 0% and getting stuck?

Re: Stuck on 0%
 

Oh, and the refrigerator thing does work but don't let it get condensation on the phone or you will have even worse juju

Wirelessly posted (htc Pocket PC: Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 7.11) Sprint MP6950SP)

Like orangekid said have you tried flashing just the gsm radio?