trouble upgrading to WM 6.5
 

I am having trouble upgrading to Windows Mobile 6.5 on my Sprint Touch Pro 2 and am hoping to get some help/advice.

I first connect to ActiveSync, then I run the MR1 program and it takes a while to "Verify information on Device" but finally does. I get to the ROM update utility tool, click next and then update to new version.

Here is where the problems starts. After, I do this, the phone disconnects from ActiveSync, I get the tricolor screen on my phone, and then I get a screen saying "ERROR [260]: CONNECTION" and a message saying that the Update Utility cannot connect to the PDA Phone.

In order to clear the tricolor screen, I have to remove the battery from the phone, wait and restart.

Also, I am running Windows via Parallels on my Mac, could this be the issue? Any other way to upgrade? Can anyone help me?

Thanks

Re: trouble upgrading to WM 6.5
 

are you using the htc usb cable? can you normally transfer data that way? some usb cables are for charging only, not data transfer. case in point, the usb cable that came with the original ps3 sixaxis controller. it looked like any other cord, but wouldnt do data transfer.

Re: trouble upgrading to WM 6.5
 

you can extract the rom from the exe and flash via sd card.
instuctions here...
http://forum.ppcgeeks.com/showthread.php?t=95375


Step 1: find the rom/radio you wish to flash and download it
Step 2: extract the .nbh file out of said rom package (will usually be named RUU_SIGNED.nbh if the rom is packed in an exe use pocket rar to extract from your phone or 7zip/winrar from your pc)
Step 3: rename the .nbh file to RHODIMG.nbh
step 4: place rom on the root of your SD card (meaning not in any folders)
step 5: power down the device completely
step 6: hold volume down and power (sleep/wake button on the Verizon variant) till the screen boots into bootloader mode (red green blue screen)
step 7: when prompted press power to flash
step 8: wait for it to finnish, sometimes it will restart on its own, sometime you need to restart it yourself but make sure you wait for the flash successful screen.

Re: trouble upgrading to WM 6.5
 

I am using the HTC cable and can connect and use Active Sync to transfer files normally, but it just cuts out and does not reconnect.

I downloaded the nbh file using info from this thread http://forum.ppcgeeks.com/showthread.php?p=1641224 (third post).

I tried flashing via SD card but when I reach the bootloader, i just get the tricolor screen and it stays there. I never get to steps 7 or 8.

Any other ideas? I really want to get this update as I'm hoping it fixes the annoying disappearing phone keypad once the screen turns off among other things.

Thanks for your help.

Re: trouble upgrading to WM 6.5
 

if you already have the .exe from sprint, i would extract and rename your own .nbh file. you never know whats floatin around out there. if you do it your self, at least you know exactly what your getting. also, make sure it on the root of the card. if its not working, you may want to reformat the card and put only the rhodimg.nbh file on it. naybe use an extra card only for flashing. i know i have an old 256mb card layin aroun i use to ensure i dont do damage to my 8 gig while flashing. your last recourse is to go to the sprint store. they will be happy to do it for you.

Re: trouble upgrading to WM 6.5
 

Go to "connections" in system options. Click on usb to pc. Uncheck the box that says "Enable faster data synchronization" and you're all set.

Re: trouble upgrading to WM 6.5
 

mine is checked, and i have no problem flashing. ive been back to stock twice since the new update dropped.

Re: trouble upgrading to WM 6.5
 

I had already tried unchecking the "faster connection box" and that still didn't work.

What finally did work was reformatting my SD card and making the nbh file the only thing on there.

Thanks so much for your help!

Re: trouble upgrading to WM 6.5
 

I had the same issue - I was able to sync, but flash failed with Error [260]. Problem was that I was not using the USB ports on the back of my desktop - was using the front USB ports (that are connected to internal USB ports on my desktop).

Switched to the Rear USB ports on my desktop and it worked like a charm. (don't use a USB hub or USB Extender - works fine for sync, but for some reason, doesn't work for ROM Flash)

Hope that helps!

Re: trouble upgrading to WM 6.5
 

no problem. dont forget the thanks button.