Does this really work?-Mr. X and MightyMike Tethering Tracking Hotfix

[boredandtattooed]

Originally Posted by wildpig

I've been using WModem w/ certain registry changes documented in the titan forum. Will this WModem and those registry setting still work in TP2 alSo? They worked fine in TP1

yes, ive been using the same method for tethering since my Titan/Mogul days as well.. the reg entry is the same

[wildpig]

Originally Posted by boredandtattooed

yes, ive been using the same method for tethering since my Titan/Mogul days as well.. the reg entry is the same

One more reason why WM 6.X kicks ass even if it's old. Wondering if be as easy w/ WM7. Prob not

[wildpig]

Originally Posted by boredandtattooed

yes, ive been using the same method for tethering since my Titan/Mogul days as well.. the reg entry is the same

Disabling NAI/Tethering Detection (hopefully)
Using a registry editor, navigate to the "HKEY_LOCAL_MACHINE\Software\OEM\WModem" key, and set the "CheckProfile", "Multi-NAI" and "WModemDUN" DWORDS to a decimal value of "0". Remember to soft reset for the changes to take effect.


if i am using wmodem, that'S the only reg change I need to make on my TP2 right? I don't need to have the other 3 reg lines mentioned in this thread?

[wildpig]

Originally Posted by boredandtattooed

yes, ive been using the same method for tethering since my Titan/Mogul days as well.. the reg entry is the same

how did you get cab to install on yr tp2? it doesnt install on mine. mind posting yr cab if different from the one in titan forum ?

tried to install manually but didnt wrk for me

[vin255764]

There are 2 .exe in windows.1 from sys,1 from sprint
IntShrUI.exe from sys and its clean
IntShr.exe-garbage file (never comes with the SYS leaks.Normally its in OEM_drivers pack of any shipped ROM)
Mr.X and MM hot fix is a renamed sys IntShrUI.exe to IntShr.exe to kill that bad .exe and keep USB to PC PopUp function


IntShrUI.exe can be triggered from start menu
IntShr.exe starting up if you select "Internet Sharing" from Usb to PC popup.

Hope that helps

[boredandtattooed]

the first is the stealth cab i believe.. the second is what ive been using since mogul

[wildpig]

Originally Posted by boredandtattooed

the first is the stealth cab i believe.. the second is what ive been using since mogul

Are you using stock 6.5 ROM ? Are you using WModem or ICS?

[boredandtattooed]

Originally Posted by wildpig

Are you using stock 6.5 ROM ? Are you using WModem or ICS?

im stock 6.5 yes... i use ICS, WMWififRouter(which starts ICS on boot), and CM Internet Sharing(another wifi app)...

i tether just about every way possible except using your severely outdated method.... what were trying to tell you is you dont need WModem anymore to gain usb tethering

[tx_dbs_tx]

Just wanted to inform everybody that recently this "stealth" tethering cab fix is no longer "stealth". (Mr.X and Mighty Mike's stealth tethering cab) Let me explain...

Usually when you tether with usb cable you open the internet connection sharing app on your phone and press "connect". you then see the error message on the top of you phone's screen saying "no connection, check usb cable...". then you simply connect the usb cable and it will connect. It would then say "not connected" but actaully it is connected and does work.

As of recently my TP2 now says "connected" instead of "not connected" when i tether in the manner I described above. I uninstalled, reinstalled, hard reset my TP2, etc, and still it is no longer "stealth" when tethered. It continues to say "connected" instead of "not connected". Something has changed. Can anybody else confirm this??

[boredandtattooed]

Originally Posted by tx_dbs_tx

Just wanted to inform everybody that recently this "stealth" tethering cab fix is no longer "stealth". (Mr.X and Mighty Mike's stealth tethering cab) Let me explain...

Usually when you tether with usb cable you open the internet connection sharing app on your phone and press "connect". you then see the error message on the top of you phone's screen saying "no connection, check usb cable...". then you simply connect the usb cable and it will connect. It would then say "not connected" but actaully it is connected and does work.

As of recently my TP2 now says "connected" instead of "not connected" when i tether in the manner I described above. I uninstalled, reinstalled, hard reset my TP2, etc, and still it is no longer "stealth" when tethered. It continues to say "connected" instead of "not connected". Something has changed. Can anybody else confirm this??

dude, how many time you gonna post this about??? your telling us something isnt right, and at the same time asking us if we have the same issue.. that makes your claim, far from obsolute... i dont even understand what the heck your talking about.. seems pretty @ss backwards that "not connected" means connected and "connected" means not connected.. i hope your logic doesnt apply to women as well, cuz i mean, well, no means no LOL

**if you did the hack, then youll have 2 differnt ICS programs.. assuming your stock, there will be the stock one-found in start>tools and the new one found floating in the start menu somewhere.. you wanna use the 2nd one