Need Help with my phone ASAP..Pleaseeee
 

I think I bricked my phone. I unlocked my phone and decide to install a new ROM and disconnected the phone from the PC before the reboot and now it does not go over the first black screen with the name " Touch pro2" It does not start and I can not access the SD card or any function on the phone. Is there any solution for this or I just bricked my phone and have to replace it??

Thanks

Mario

Re: Need Help with my phone ASAP..Pleaseeee
 

Did you try to go in bootloader?

Wirelessly posted (Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 8.12; MSIEMobile6.0) Sprint Touch Pro 2)

i dont think thatll brick it... with the fone off hold talk, end, and power then press volume up. that should hard reset it

Re: Need Help with my phone ASAP..Pleaseeee
 

If the hard reset doesn't work, try to reflash by going in to bootloader, Vol. Down+ Power+soft reset.

Re: Need Help with my phone ASAP..Pleaseeee
 

I can get to the screen of 4 colors (red, green, blue and white) I guess that it bootloader but I can't do nothing else. What's the next step to reflash???

Re: Need Help with my phone ASAP..Pleaseeee
 

Download a ROM from CDMA TP2 upgrades and flash from bootloader. Hope that helps, but I don't think it's a brick.

Re: Need Help with my phone ASAP..Pleaseeee
 

I had the exact same situation previously and below is what I did:

1. With the device turned off, press and hold the TALK/SEND, END and POWER buttons until you see this message on the screen.

"This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel."

2. Release the TALK/SEND, END and POWER buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.

Re: Need Help with my phone ASAP..Pleaseeee
 

How do I flash from bootloader???? Should I copy the ROM to he root of the SD card and will I be able to see the SD ROM from bootloader???

thanks

Re: Need Help with my phone ASAP..Pleaseeee
 

1. You need to get your phone to the bootloader (hold down - volume while pressing the soft reset with the stylus, this should present you with a tri-color screen.)

2. Download a rom made for your TP2 (if your phone is CDMA like Sprint or Verizon check out http://mightyrom.com).

3. Launch the installr for the ROM. Make sure your phone is connected to the PC via a USB cable and follow the on screen prompts. (Your screen should show %0 then %1 etc.)

4. When the phone reboots you should boot into the custom rom (first boot takes a while so be patient.)

Hope this helps! Cheers!

Re: Need Help with my phone ASAP..Pleaseeee
 

Yes. If you're flashing from SD put the .nbh on the root of your card, and rename it to RHODIMG