PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Touch Pro 2 (http://forum.ppcgeeks.com/forumdisplay.php?f=97)
-   -   Sold TP2 w/SsS-ROM 2 & now won't activate (http://forum.ppcgeeks.com/showthread.php?t=110136)

cj10488 02-09-2010 11:59 PM

Re: Sold TP2 w/SsS-ROM 2 & now won't activate
 
for the file ftp://up.ppcgeeks.com/Touch%20Pro%20...60652_Ship.exe

try running that should help ya out.. you need to have activesync installed. If it wont let you flash you can get into the boot loader I believe its Vol Down and Power while the phone is off. Hold down until the boot loader opens up. If it wont flash this way then there might be other issues.

James

Mayonesa 02-10-2010 12:00 AM

Re: Sold TP2 w/SsS-ROM 2 & now won't activate
 
Quote:

Originally Posted by Penny (Post 1554464)
Sprint tech at the store said they tried to install correct software cause they saw the 6.5 and said it would not allow them to that is why they said it was fried. But maybe they didn't know what they were doing... worth a shot.


most sprint techs are worthless. i showed them a lot at my local store.


i would flash back to stock and go from there, you should be fine...

apacheln 02-10-2010 12:05 AM

Re: Sold TP2 w/SsS-ROM 2 & now won't activate
 
I second that. I did an online esn swap from my first line to my second line. The activation part from Sprint work as the second line showed a TP2 online, but the programming was still needed. Could not get EPST to work so I had to flash to stock rom, and then put in ## code to program msd. I tested to make sure I was able to make a call. Then I flashed SSS rom and it worked. No need to reprogram after flashing.

Quote:

Originally Posted by cj10488 (Post 1554456)
I would flash back to the Stock rom. If the dialer is in fact GSM the ## codes will never work... Look for RUU_Rhodium_W_Sprint_WWE_1.21.651.3_RS_1.96WF_NV_S PCS_1.42_0430_PRL60652_Ship

On these forums flash it and you should be good to go. Or you can flash to mightyrom (the best) and provision for sprint and be good to go as well. PM me and I can give ya my number and you can call me if you like and I can walk ya thru it. The TP2 is a great phone.

James


Mr.Gadget 02-10-2010 12:14 AM

Re: Sold TP2 w/SsS-ROM 2 & now won't activate
 
Cool Penny! Had no idea you were on here too. Over on SprintUsers I am on as "emtownsend". Also on as Mr.Gadget on PPCGeeks and XDA-Developers. We can do this!

Penny 02-10-2010 10:43 AM

Re: Sold TP2 w/SsS-ROM 2 & now won't activate
 
Ok, so I installed the RUU above and then activated again and all works fine! except waiting on the internet to work guess it takes a bit to start working. Can't figure out how to update profile on this phone yet.....lol Thanks so much everyone for all the help. Wonder why Sprint couldn't re install the same thing. Guess I should have came here first huh? Now will have to tell them to cancel the order for the new one if they can.

BOY is this interface UGLY! Can I reinstall 6.5 now? and where do I get the correct one?

Thanks Eric!

kenny21 02-10-2010 10:53 AM

Re: Sold TP2 w/SsS-ROM 2 & now won't activate
 
Actually this happened to me as well when i sold my TP. I did have to flash back to the stock rom and then it would activate. I thought it was kind of weird because the dialer and everything worked on that rom and even got it activated on line and everything, but when it came to the programming the phone with his information the phone wouldn't accept it.

boeman 02-10-2010 11:12 AM

Re: Sold TP2 w/SsS-ROM 2 & now won't activate
 
Cool, glad everything worked out.
At the top of the TP2 forum, there is a subforum called CDMA TP2 Upgrades... in there you can find numerous custom WM6.5 roms. Personally I'm using MightyRom right now, I've tried a few others but I keep being drawn back to Mighty. Be sure you follow the instructions in the first post completely. The phone will work much better if you follow the steps completely.

Maxx134 02-10-2010 11:24 AM

Re: Sold TP2 w/SsS-ROM 2 & now won't activate
 
Quote:

Originally Posted by Penny (Post 1554440)
Hey guys, I am the one who bought the phone from OP. I have swapped ESNs several times but this is the first problem I have had. Here is what I did. I first went online chat to activate phone. They swapped ESNs turned phone on did not automaticaly proram as HTCs are supposed to. Tried to manually program as they directed me to. When I got to the ##******# code the edit (MDN MSID) option never opened up.

They asked me to call tech support after numerous attempts and reseting phone. Tech support went through everything again....still same problem with ## codes. Was transfered again to someone else after numerous attempts again to get ## code to work. Again steps to activate after another Hard reset. Still no MDN MSID edit screen after ## codes.

Was told to take to Sprint store to over the air activate. Took it and same thing could not get it to activate. Phone shows on my account and online as the phone active on my account but still activation will not complete.
I am not upset with Eric at all. Just want to be able to use it.

Before you reflash a rom install a new dialer.
You will then hopefully hav the codes working to manually program your numbers in.
Sprint techs do not know about custom roms and there is no way they could have helped you.
I have had to go manual with codes & do this with my TP to TP2 AND Hero.

Quote:

Originally Posted by Penny (Post 1554464)
Sprint tech at the store said they tried to install correct software cause they saw the 6.5 and said it would not allow them to that is why they said it was fried. But maybe they didn't know what they were doing... worth a shot.

They are complete idiot to say it was fried, just because they cant flash another rom with their methods.
Just flash another rom yourself and you will be fine to do your programming.
I even hav recommended roms in my sig.
Goodluck!
Edit: goo to hear U fixed it.
Ya U did best way by return to stock for programming...

lipidfats 02-10-2010 11:27 AM

Re: Sold TP2 w/SsS-ROM 2 & now won't activate
 
Quote:

Originally Posted by Penny (Post 1555160)
Ok, so I installed the RUU above and then activated again and all works fine! except waiting on the internet to work guess it takes a bit to start working. Can't figure out how to update profile on this phone yet.....lol Thanks so much everyone for all the help. Wonder why Sprint couldn't re install the same thing. Guess I should have came here first huh? Now will have to tell them to cancel the order for the new one if they can.

BOY is this interface UGLY! Can I reinstall 6.5 now? and where do I get the correct one?

Thanks Eric!

Ha this was an ineresting thread to read. Happy to see everything resolved. You can flash any CDMA touch pro2 ROM. make sure it's cdma and it's for the touch pro2. the forum for that is stickied at the top and i'll link it here: http://forum.ppcgeeks.com/forumdisplay.php?f=98
you had sss s2 on there when you got it. it's now updated to s5 and s6 is in beta right now. mighty is another popular one to check out. just follow the steps you took to flash the stock rom and you'll be set to test all these new roms. have fun!

Mr.Gadget 02-10-2010 03:08 PM

Re: Sold TP2 w/SsS-ROM 2 & now won't activate
 
Thank you all for your help and advice on this one. I learned something new too!


All times are GMT -4. The time now is 01:17 AM.

Powered by vBulletin® ©2000 - 2024, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0