TP2+S2U2 = fail?
 

Ok I just moved to the TP2 a few days back and just got around to installing s2u2 on it. but its very laggy.

I have been using s2u2 for years (since it was first released) and loved it.
It ran perfect on my mogul and Touch pro.

So I'm not sure why its so slow on the TP2 as its much more powerfull. Anyone know a fix for this issue?

Re: TP2+S2U2 = fail?
 

Make sure you have the latest 2.30. Install on devie memory . It runs fine here, I am new to it coming from Pocketshield which I am still hunting..:mrgreen: I like that you can turn off the screen with one click, still looking for that in S2U2.

Re: TP2+S2U2 = fail?
 

have you tried changing it from gdi to something else... sometimes that helps with lag issues, at least it did in older versions

Re: TP2+S2U2 = fail?
 

FYI
mine is set to GDI, no lag at all.

Re: TP2+S2U2 = fail?
 

No lag here. Been running S2U2 since my mogul :)

Re: TP2+S2U2 = fail?
 

run perfect on my tp2

Re: TP2+S2U2 = fail?
 

Runs just fine on mine, too. In fact, coupled with the auto screen turn off feature of Changescreen, I just turn my phone over, and it auto-locks.

Re: TP2+S2U2 = fail?
 

hey hey hey Blue deer, wtf you talkin bout:mrgreen: i am issing on this feature , school me up if you catch me before i find it ...:headbang:I would love to just hit an icon on the phone and accomplish both locking and turning it off.

Re: TP2+S2U2 = fail?
 

I've given up hope on this program. It just doesn't ever run without problems. I don't know of an alternative, but S2U2 is NOT the answer.

Re: TP2+S2U2 = fail?
 

Get 2.22, don't try the 2.24 or 2.30, they suck and have issues with the tp2. I went back to the 2.22 and it works perfectly.

Re: TP2+S2U2 = fail?
 

u know with s2u2 u just tap power and it goes off and locks.and been using s2u2 for a week now after master reset. so far no porbs. had prob before the answer/end keys in another language. found out cant fix that so i use only slide to answer. and sometime it would hang up/lag on calls and not let me answer. but so far now hasnt happened.

Re: TP2+S2U2 = fail?
 

what power ar eyou referring to? on/off switch or some other way

Re: TP2+S2U2 = fail?
 

dont ever use the slide 2 answer feature.. it always creates lag and BTW our phones already have that cool lil proggie..

and i agree with the 2.22 its the only 1 that works perfect everytime... just stay away from the ADVANCED and OTHER choices.. they only cause more problems when u change anything from stock... heres the 2.22

Re: TP2+S2U2 = fail?
 

Ditto i had the never ending locking problem. and god forbid if i had it under password lock i would be screwed i tried like four versions of this problem i loved how it would send a txt to a person who i rejected with one click. i moved to pocket shield but havent installed either since i started running energyrom on my tp2. but thats cuz the rom has a s2u2 problem already installed on it. just have to lock the phone when you want it to activate which is a little annoying but i nvr use it so its all good.

Re: TP2+S2U2 = fail?
 

I´m using version 2.04, and it works well, too!

Re: TP2+S2U2 = fail?
 

ive had every version of s2u2 since my 6700 and ive never had one work just right. ive given up with it on my tp2.

Re: TP2+S2U2 = fail?
 

yea the energyrom and most other roms with htc sense have a slide to unlock program already installed all you need is a secondary cab. to make it lock everytime you turn off your screen

Re: TP2+S2U2 = fail?
 

Ive been using it since 2.02(I think) very few problems. Im on 2.14 now and have 0 issues. Id update, but I have a decked out Star Wars theme and Im too lazy to figure out how to save it. But yeah, no issues

Wirelessly posted (TP2 Biznitch: Opera/9.80 (Windows Mobile; WCE; Opera Mobi/WMD-50301; U; en) Presto/2.4.13 Version/10.00)

yea the built in wm locking program that never works right. I tried so many cabs for using it and it works at first but then it stops locking. I dont get how a built in locking program sucks so bad...

Re: TP2+S2U2 = fail?
 

the new s2u2 is working pretty well for me atm. i started with s2u2, switched to pocketshield, now im back to s2u2 just for some eyecandy. the amount of options is somewhat overwhelming but if you spend an hour or 2 figuring them out you can get it running flawlessly.

Re: TP2+S2U2 = fail?
 

well s2u2 isnt a build in program and the ones that have it are all user cooked roms nothing offical so there are always flaws. sometimes even in settings. but the stock locking program i have nvr had an issue with unless it was forgetting the password lol

Re: TP2+S2U2 = fail?
 

what ive noticed about the NEW wm locking prog is that you need to hold the phone upside down-with the screen on-and then it'll lock... dum

Re: TP2+S2U2 = fail?
 

The lastest version, 2.30, has a new feature where you can set S2U2 to override the WM lock. So anytime you hit the lock soft key S2U2 will kick in. It seems to work fine.

Are you referring to my theme? If you downloaded my graphic files just copy them into the new gfx folder. Also, I don't remember if v.2.14 has the theme option in the settings. If it does, just save the theme. Then copy the file to your storage card or anywhere else you like. You can rename it, ie StarWars.s2u2. Then when you install the new version of S2U2 you can reload the theme without having to copy over the files.

Re: TP2+S2U2 = fail?
 

wsssup POPDOG, cool work my friend. Where is the feature to overwrite wm lock? where is dat biatch:mrgreen:

Re: TP2+S2U2 = fail?
 

In the S2U2 Settings under Advanced... Replace WM6.5 system manual lock.

Re: TP2+S2U2 = fail?
 

may have asked the wrong way, am looking to turn off TP and lock, is there such a feature like pocketshield

Re: TP2+S2U2 = fail?
 

earlier versions were battery drains but the recent versions 2.2x/2.3 = gold

Re: TP2+S2U2 = fail?
 

Thanks to everyone who suggested 2.22. I just got mt TP2 and installed 2.24 and it was awful! I had to unlock up to 6 times and no matter what setting I chose, it would not stop. I had given up on S2U2 until I saw this thread. Thanks again! Works like a charm now.

Re: TP2+S2U2 = fail?
 

I am using 2.24 s2u2, I recall you have to change the Display Mode( in advance setting) to Raw Buffer, this has stop alot of errors from coming up, also make sure you turn the KB feature off so if you slide out your keyboard it will not unlock your device.

Re: TP2+S2U2 = fail?
 

Wow, thanks for all the replies guys. I fixed my problem by installing 2.22. IT works perfect. going to start another thread for pandora. Maybe we can get that issue fixed also.

Re: TP2+S2U2 = fail?
 

OMG this happened to me today. I went to unlock my phone and it tells me my password is incorrect, I knew it wasn't but finally gave up after trying to unlock it unsuccessfully for hours. Eventually I had to reflash my phone. Talk about a PITA, WTF is up with that? Ruined my whole freakin week.

Re: TP2+S2U2 = fail?
 

I'm not understanding exactly what you want to do. Could you be more specific?

Re: TP2+S2U2 = fail?
 

I d like to hit an icon and turn off the TP2.When turned back on, silde to answer will be required.

Re: TP2+S2U2 = fail?
 

that should be the default behavior of s2u2...

Re: TP2+S2U2 = fail?
 

Freeza, how do u turn off yours? do u hit the on/off switch? or do you have an icond that does it? i dont know about that S2U2 lock icon still.

Re: TP2+S2U2 = fail?
 

i just hit the power button on the top. but regardless of how your phone goes into standby, s2u2 should activate. it places itself in the startup folder and as long as it is running in the background, it will activate. You also may need to double check the settings in s2u2 settings and make sure it is set to lock after a certain amount of time, or after the screen goes blank/backlight goes out.

Re: TP2+S2U2 = fail?
 

10 4 freeza man, i am just looking to avoid the on/off button period. In PS i just hit the PS lock icon and the thing goes off. Dpes the lock icon in s2us perform the same?

Re: TP2+S2U2 = fail?
 

It will activate S2U2, however, the screen won't shut off immediately. It will still wait the amount of time set in settings before the screen shuts off. :)

Maybe there is a command switch in iLock.exe (component of s2u2) that will shut off the screen and launch s2u2? I haven't looked in the FAQ or Help to figure out all the command switches, but if it isn't in there, i'm sure A_C wouldn't mind implementing it if you requested it on his thread on XDA.

Re: TP2+S2U2 = fail?
 

it runs fine on my tp2 but that pocketshield for some reason when i had it delay my texts by like 30mins, once i took it off it was back to normal

Re: TP2+S2U2 = fail?
 

a saw a cab on this forum that allows the stock slide to unlock program to auto lock when you turn off the screen. im not seeing it now. is there anyone who can post it again for me.