My TP2 wont boot up please help - Page 3

tr0s · #21 (**permalink**) 01-19-2010, 01:01 AM

i really think he was just using the wrong terminology. dvonte, did you mean hard reset or hard spl?

dvonte93 · #22 (**permalink**) 01-19-2010, 01:01 AM

Quote:

Originally Posted by aguenter322

That's not true, flashing GSM ROM -> CDMA device or CDMA ROM -> GSM device will not brick, you can still enter bootloader and flash to stock from USB or another cooked ROM from SD.

yes i can enter the bootloader but idk what to do now

tr0s · #23 (**permalink**) 01-19-2010, 01:03 AM

does it say usb or serial on the white portion of the screen?

dvonte93 · #24 (**permalink**) 01-19-2010, 01:05 AM

Quote:

Originally Posted by tr0s

does it say usb or serial on the white portion of the screen?

it says usb

aguenter322 · #25 (**permalink**) 01-19-2010, 01:08 AM

Run the stock ROM installer. Did you download that yet?

Who is your carrier?

Rafy0003 · #26 (**permalink**) 01-19-2010, 01:08 AM

Your fine just Download a new CDMA rom and place the NBH file on the Sd card, Hopefully you have another way of transferring it to the Sd card.

aguenter322 · #27 (**permalink**) 01-19-2010, 01:10 AM

Download and run this while in the bootloader screen with USB at the bottom, assuming you're on Sprint.

ftp://up.ppcgeeks.com/Touch%20Pro%20...60652_Ship.exe

Guys are we sure he's HardSPL'd? I know he shouldn't have been able to flash an unsigned ROM if he wasn't, but you never know lol...

dvonte does it say SPL-1.xx.OliNex on the bootloader screen?

tr0s · #28 (**permalink**) 01-19-2010, 01:10 AM

so it's plugged into your computer. go into the cdma tp2 upgrade section on this site and pick a rom to download. you should be good to go.... i would suggest picking a popular rom like mighty, juicy, silence, or malrom as you seem relatively new to this flashing thing... unzip the archive you download and run the installer.

on second thought just to make sure everything is on the up and up maybe you should just flash the stock rom and get that thing back on and running before you venture back out into the flashing world.

dvonte93 · #29 (**permalink**) 01-19-2010, 01:13 AM

lol to many replies you guys confuse me

tr0s · #30 (**permalink**) 01-19-2010, 01:15 AM

keep it plugged into your computer and flash the stock rom found here ftp://up.ppcgeeks.com/Touch%20Pro%20...60652_Ship.exe

this will bring you back to the stock rom just to make sure your phone isn't killed. if this works, you can try and flash a custom rom after. but i would definitely suggest going stock first.