|
|
||||
You've gotta relock to go back to old OS. By the way, there is a way to extract the nbh file, load it to a mini sd and then flash from there.
EDIT by ImCoKeMaN: The old unlocker doesn't work with this rom, get the update here: http://forum.ppcgeeks.com/showthread...746#post168746 If you only want the essentials and to remain unlocked you might want to check out this post by shadowmite: http://forum.ppcgeeks.com/showthread...441#post168441 I have found that if you have issues where your device seems to be bricked and stuck in bootloader before completion of the update you can fix it by flashing via SD card. To do this there are 3 steps: First take the .exe file and open it with winrar. There will be a file 3.16.....nbh extract that and rename it to TITAIMG.nbh Next format a microSD card with FAT 32 (required most are fat16 default) and copy the file TITAIMG.nbh to the root of the sd card with a card reader. Finally place sdcard in device and reset into bootloader mode. The flash will proceed from the SD card and it should work fine. Enjoy! |
|
||||
Quote:
i got mine out of the boot loader on vista with some playing around... did you take your battery out and put it back in? still in boot loader? if so.. try the re-locker posted on the cokemans section on the websites ftp.. just try playing around with it.. you should get it.. or do that flashing via your memory card when you get a chance.. |
|
||||
Try to reloc. Plug the phone to the USB and then try to reloc. From most of what I read it's connected even though you don't think it is.
|
|
||||
I had this same issue today when I went to install the new rom... What worked for me was the following.
1. Put the phone in bootloader mode... Yes, even if it says it's in bootloader mode 2. Run the bootloader install again. 3. Once it's done re-installing(Happens really quick), disconnect and reconnect the usb cable. 4. Run the rom install again and all should be good. I had to do a hard reset after this install but once everything came back up, everything worked as it should. Good luck |
|
||||
thanks for all of the advice guys, I've tried all of what you guys are saying and none of it has worked, I think I might need to buy a microSD card reader like was mentioned. If anyone else has any input, it is great appreciated.
|
|
||||
No you don't need microsd to do the work
Download dcd version, it should work http://forum.xda-developers.com/showthread.php?t=362566 Just run it even the phone is on 3 bar |
![]() |
|
|
|