SPC/MSL code of sprint diamond
 

Please tell me how can i get the SPC/MSL code for Sprint Diamond.
Thanks

Re: SPC/MSL code of sprint diamond
 

Read the SPC section here

Re: SPC/MSL code of sprint diamond
 

Wondering if I am the only person that this did NOT work for. It always worked on my Titan, so not sure what I could be doing wrong.

Re: SPC/MSL code of sprint diamond
 

try entering your numbers in the website link and using the PseudoESN, see if that works

Re: SPC/MSL code of sprint diamond
 

Nope, no such luck. Will try again

Re: SPC/MSL code of sprint diamond
 

You can view your MEID & pseudo ESN Dec + Hex from your phone by typing ##786# (BECAREFUL NOT TO RESET YOUR PHONE!)

-CC

Re: SPC/MSL code of sprint diamond
 

When I do this, it gives me all kinds of errors such as: "Read Item 'ESN(Hex)' failed" and "Read Item 'Mobile Number' failed"... Now that I think about it, I had some issues activating the device as well. Everything is activated now though but what would cause this?

To make sure I'm being clear, when I hit ##786# it throws out an error message for every single field.

Re: SPC/MSL code of sprint diamond
 

Also, I am now noticing that when I go to Start-Settings-System-Device Information the MEID field is completely blank. I am completely baffled now, as I have not even so much as flashed a ROM to the device since activating it, and the MEID showed just last night when I looked there.

Re: SPC/MSL code of sprint diamond
 

Re: SPC/MSL code of sprint diamond
 

For Sprint Diamonds

Use CDMA Workshop and connect to the phone in diag mode.
Go to the "Security" Tab and hit "Read" SPC.
Select Universal Ram Method and Custom.
Address is: 018E:0190
Hit READ to find your SPC.

For Telus Diamonds I was told GetSPC works if you convert MEID to p-ESN but I haven't tried it myself.

Re: SPC/MSL code of sprint diamond
 

Those errors are not uncommon, I have seen it before, just loook again, or soft reset and look again. It means it is having a hard time reading the information in the alloted time and times out, giving you an error.

If it persists, I suggest a Hard Reset, if it continues, talk to tech or store for a possible exchange.

-CC

Re: SPC/MSL code of sprint diamond
 

On my Sprint Diamond I used the pESN and the code getspc gave didn't work and it's the same as the one Sprint gave me for manual activation online.

-CC

Re: SPC/MSL code of sprint diamond
 

thats correct.

the telus device actually has a ESN and MEID. ESN is not shown unless you goin to EPST or into Qpst

Re: SPC/MSL code of sprint diamond
 

i think sprint may have the one time use ticker attached to there SPC.

once yo use it once you cannot use it again it shuts it off in the Service programming.

if you use QPST and check service programming (if you can get in with spc) you can see the "one time use" setting in there.

Re: SPC/MSL code of sprint diamond
 

I will try this as soon as I get off of work. I'm not familiar with CDMA Workshop or diagnostic mode. Where do I get the workshop and how do I go into diagnostic mode? Thanks!

Re: SPC/MSL code of sprint diamond
 

just call and ask sprint for your msl. i have used mine more than once that they gave me. just mention that you had to activate your phone a second/third time after hard reseting and you want to just write down the info and put it back in if it gets wiped again.

Re: SPC/MSL code of sprint diamond
 

No, that's illegal. You can pay for the software, or ask your question somewhere else. The cost of the full program is $99 I believe.

As for the MEID I saw that was posted a while ago... at one point the telus roms (and old kitchen) actually set the MEID display to all zeros. If this it what you say, I wouldn't be worried. I believe the newest version of the kitchen, which most chefs are using show most setting including HEX ESN, network username, Hex MEID, MDN and MSID.

I'm pretty sure I put them in the kitchen... if not (can't look at the moment) they should be in the next release.

Re: SPC/MSL code of sprint diamond
 

Thanks a lot. I was finally able to do this, I even changed it to all 0´s so I wouldn´t need to remember them.

Re: SPC/MSL code of sprint diamond
 

. Find your ESN in hex. If you have it in decimal, use this to convert it. You want the Pseudo ESN Hex number.

2. Download PPST_KeyGen.dll and GetSPC.exe, and then transfer them to your phone.

3. Run GetSPC.exe on your phone.

4. Enter your hex ESN in the Input field.

5. Press Go.

6. Write down your SPC from the Output field.

NOT WORKED WITH ME

DIAMOND SPRINT

guys i couldnt get my correct SPL/MSL code to edite the EPST . here is the details who can help me and how i can do it by my self..
MEID Hex


A10000055186B4MEID Dec270113178105342900Pseudo ESN Hex8022F2EAPseudo ESN Dec12802290410REAL Binary10100001000000000000000000000101010100011000 011010110100

Re: SPC/MSL code of sprint diamond
 

I also have a sprint diamond.

the exe did not work for me.

I had to use the registry hack to get it.

that is the only thing that worked.......

Re: SPC/MSL code of sprint diamond
 

I told Sprint (by email) that I have been having difficulty with the Diamond maintaining the Vision settings. They emailed the MSL along with the following:


1. From the Dial Pad, enter ##3282#.
2. Tap the Edit radio button.
3. Enter six digit code: (XXXXXX).
4. Tap OK.
5. Tap Menu.
6. Tap Restore.
7. Tap OK at the Warning Prompt
8. Tap OK to reset the Device.
9. Perform an Update Data Profile

Hope this helps.

-s

Re: SPC/MSL code of sprint diamond
 

this is my email man iu can get me the spc / mSL luay_la@hotmail.com

Re: SPC/MSL code of sprint diamond
 

Thanks for posting all your info on this forum so I can clone it and use your plan:)

MOD EDIT THAT!

Re: SPC/MSL code of sprint diamond
 

thanks for the info, i'll give it a try...

Re: SPC/MSL code of sprint diamond
 

i am not able to enter second part of memory address (i.e. 0190) in cdma workshop as that portion is greyed out and locked.
please help me.
Thanks

Re: SPC/MSL code of sprint diamond
 

http://forum.ppcgeeks.com/showthread.php?t=41203&page=2


Refer to my post, I got the MSL that way from my Sprint Diamond. :headbang:

Re: SPC/MSL code of sprint diamond
 

Yes! I did this yesterday and it worked for me on my Sprint Diamond :D

Re: SPC/MSL code of sprint diamond
 

This has worked for me as well. Not sure why that info isn't stickied.

Re: SPC/MSL code of sprint diamond
 

Yeah I had to try 3 ways before finally getting to this method.

Hope I saved some other people some time.:headbang:

Re: SPC/MSL code of sprint diamond
 

Cut and paste: (This worked, other methods did not for me...)

FYI, for all the Sprint people who don't what their MSL is:

I found this procedure on the xda forum and it works!!

I found a method that actually worked perfectly...

Use this method. I don't know who found it, but credit goes to them.

Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1

* Wait a about 10 minutes (more time will not hurt), and soft-reset.

* Check to see that the file \Atlog\ATDbg0.txt has been created.

* Return the values back to what they were (most likely 0) waiting the same amount of time as above.

* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

~~~~~~~~~~~SNIP~~~~~~~~~~~~
00:00:00 Tx:AT+HTC_RMSL=0\r
00:00:00 Rx:+HTC_RMSL: (###THIS WILL BE THE MSL###)\r\n0\r
00:00:00 Tx:AT+HTC_ROTKSL=0\r
00:00:00 Rx:+HTC_ROTKSL: 123456\r\n0\r
~~~~~~~~~~~SNIP~~~~~~~~~~~~


The numbers next to the Rx: +HTC_RMSL line should be your MSL

Re: SPC/MSL code of sprint diamond
 

after registry change and soft-reset the .txt file is not being created.
any suggestions?

Re: SPC/MSL code of sprint diamond
 

you must wait 1 min after setting reg to 1, soft reset. then wait 5 min, set back to 0, then wait 1 min soft reset and the log will be there.

Re: SPC/MSL code of sprint diamond
 

still not seeing a log, where am i supposed to be looking??

Re: SPC/MSL code of sprint diamond
 

\Atlog\

on the root

Re: SPC/MSL code of sprint diamond
 

got it, made an idiot mistake while searching. thanks man.

Re: SPC/MSL code of sprint diamond
 

lol its cool

Re: SPC/MSL code of sprint diamond
 

This shows your SPC?

Re: SPC/MSL code of sprint diamond
 

Yes, Sprint gives you the code because you need it to perform the steps they will lay out for you.

-s

Re: SPC/MSL code of sprint diamond
 

Thanks!

Re: SPC/MSL code of sprint diamond
 

Hi,

I have tried with CDMA Workshop and with the pESN / GetSPC methods but nothing. Is there any other method?

With the CDMA Workshop I just get "No security codes found", and the GetSPC method just doesn't work.

Since I'm outside US, I don't think I will be able to call Sprint. Could someone help me out with a more detailed method for CDMA Workshop?