[UPDATED Added Files] FULL SUCCESS! SuperCID and QPST for NV EFS access
SuperCIDing
Prerequisite 1. The Phone should have Hard SPL MFG (For Diamond 0.43 HardSPL MFG) SuperCIDing 1. Disable USB in Connection Settings of Active Sync 2. Boot The Phone in bootloader mode. 3. Connect Phone to PC 4. start mtty.exe 5. Select All Default and Connect to USB in drop down box and Shoot the Following Commands (All Commands are case Sensitive) 6. run command rtask a : After this Command Phone will not Display any thing 7. run command echo_on : even though nothing is shown to screen 8. run command readCID : in Telus it will display TELUS001 9. run command writeCID 00000000 : Set CID Value to 00000000 replaces TELUS001 in Sprint (This make PPC Radio Security Level to Zero) 10. run command readCID : This will Display the Update CID as 00000000 11. run Command retuoR : This will return to Original Boot Loader State 12. run command rtask c : This will Activate Phone Radio and then we can Access Diagnostic Port and Set NV Items Issuing rtask c Command Put the Radio of Phone to ON State so we can have Radio NV Command work properly Getting NV Folder Access In QPST EFS Explorer In QPST EST File Explorer Just Create the Following Directory in root ( \ ) open sesame door After Creating open sesame door directory in root of Phone Reboot and again try to access the NVM Folder Here are all the files you need in a nice RAR file, this includes OPST, Qualcomm USB Drivers, CDMA Work Shop and GETSPC Thanks To hetaldp, no2chem, and Puff for testing as well and giving me little hints. |
Re: SuperCID and QPST for NV access
Quote:
|
Re: SuperCID and QPST for NV access
Quote:
|
Re: SuperCID and QPST for NV access
Quote:
|
Re: SuperCID and QPST for NV access
thanks for reopening my thread :)
No2Cham can you explain to me what the MFG SPL is and how it differs from the SPL we use to unlock the device for provisioning and qpsting |
Re: SuperCID and QPST for NV access
TRY THIS
SuperCIDing Prerequisite 1. The Phone should have Hard SPL MFG (For Diamond 0.43 HardSPL MFG) SuperCIDing 1. Disable USB in Connection Settings of Active Sync 2. Boot The Phone in bootloader mode. 3. Connect Phone to PC 4. start mtty.exe 5. Select All Default and Connect to USB in drop down box and Shoot the Following Commands (All Commands are case Sensitive) 6. run command rtask a : After this Command Phone will not Display any thing 7. run command echo_on : even though nothing is shown to screen 8. run command readCID : in Sprint it will display SPCS_001 9. run command writeCID 00000000 : Set CID Value to 00000000 replaces SPCS_001 in Sprint (This make PPC Radio Security Level to Zero) 10. run command readCID : This will Display the Update CID as 00000000 11. run Command retuoR : This will return to Original Boot Loader State 12. run command rtask c : This will Activate Phone Radio and then we can Access Dignostic Port and Set NV Items Issuing rtask c Command Put the Radio of Phone to ON State so we can have Radio NV Command work properly DONT Forget to say Thanks |
Re: SuperCID and QPST for NV access
This is for Touch / Vogue
http://www.mobile-files.com/forum/sh...68&postcount=1 This is for Mogul http://www.mobile-files.com/forum/sh...4&postcount=82 |
Re: SuperCID and QPST for NV access
Quote:
I cannot get mtty to detect the diamond i must be missing some drivers. |
Re: SuperCID and QPST for NV access
after some poking around i found a beta version of mtty that detects the diamond. (never had issues with 1.43 before)
will report my findings back EDIT: i dont think its connecting to the Diamond correctly. ill try my xp computer shortly. this is what i get "rtask a rtask a Command error !!! Cmd>rtask a rtask a Command error !!! Cmd>? ? Command error !!! Cmd>help help Command error !!! Cmd>" |
Re: SuperCID and QPST for NV access
Ive tried the suggested command strings with no luck. i always get command error
i know the diamond is connecting to mtty because when i open mtty it has the usb option. if i unplug the diamond and open mtty usb option is gone. either im doing it wrong or this method will not work to change superCID |
Re: SuperCID and QPST for NV access
and you have the Diamond 0.43 HardSPL MFG?
|
Re: SuperCID and QPST for NV access
Quote:
should i flash to the .43 MFG spl? im guessing that's my problem if your mentioning it. Edit NVM i answered my own question. i do need the .43 i will flash it now. |
Re: SuperCID and QPST for NV access
Quote:
|
Re: SuperCID and QPST for NV access
Quote:
|
Re: SuperCID and QPST for NV access
Success!
Followed these commands Quote:
Note: this requires the buggy Hard SPL .43 MFG to work. HardSPL .57 does not have the rtask commands in it :( i have a question, please dont beat me because im noob in the HTC boot loader (know palm well though). but if i flash back to the Hard SPL .57 will this change my superCID back to the TELUS001? |
Re: SuperCID and QPST for NV access
Quote:
|
Re: SuperCID and QPST for NV access
crap in a hat, i want NV folder access in QPST EFS explorer. its still locked :(
i have NV access in bootloader with superCID but not here :( i read some where that the SPL is supposed to unlock this if you also have superCID 0'd out (atleast with the HTC 6700/6800) any thought on how to unlock the NVM, .efs_Private and sfs folders in the EFS explorer under QPST. i DID sucessfully change the superCID to 00000000 though. |
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
bump for the title edit
I have Bootloader NV access but still am unable to get into NVM under QPST |
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
CDMA Workshop.
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
Quote:
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
u might also check out QXDM ;-)
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
Quote:
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
Quote:
Quote:
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
For Getting Access to NVM Here is the Trick
In QPST File Explorer Just Create the Following Directory in root open sesame door After Creating open sesame door direcotyr in root of Phone Reboot and again try to access the NVM Folder |
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
Quote:
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
Quote:
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
Quote:
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
Quote:
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
1 Attachment(s)
either that or maybe i did something wrong...
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
Quote:
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
Quote:
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
ive extracted the PRL files in case they are ever needed :)
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
Quote:
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
Quote:
i wish my s640 was hacked so quickly :P im going to edit this thread when i have a little more time and collaborate all the info on the first post :) |
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
Quote:
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
Quote:
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
Quote:
|
Re: [UPDATED] Post #17 SuperCID and QPST for NV access
Quote:
|
Re: [UPDATED] FULL SUCCESS! SuperCID and QPST for NV EFS access
I'm glad it all worked out. I also enjoy the humour behind "open sesame door" :D
|
All times are GMT -4. The time now is 04:01 AM. |
Powered by vBulletin® ©2000 - 2024, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com