6700 help
 

Ok this might be a little long and I'm sorry for that, I just want to give the whole story and hope someone can help me. I've been reading the site all morning and tried everything I've clicked on.
Yesterday my phone would not disconnect from a call. After a reboot I could not make any calls at all. Verizon was no help he kind of just looked at the phone sideways kind of like I did.
After messing with it all day I found this site late and in a STUPID haste downloaded kivin WM5. Now when I go back and READ PDAPhoneJunke's post I notice he said don't try it with a bootloader over 1.02. So I've made the mistake and pointed it out, no need to call me a idiot or a newb I know...
So now the phone is stuck in bootloader mode with Serial on top and 2.05 below. I've read what to do to fix this but no matter what I do I can't seem to get my PC to see the phone now. I turned active syn off, tried a new port, uninstalled the usb driver.
Even after a hard reboot the phone does back to the bootloader screen.
Ok thats everything I can think of. Any direct help at this point would put me in your dept for life. Thanks in advance for any suggestions or help.

Re: 6700 help
 

There are two ways that I know of mtty and uni_exitbootloader. Did you try both of those?

Re: 6700 help
 

From XDA but my vote it for the uni_exitbootloader

************************************************

There's a tutorial for Stuck In bootloader somewhere... please search...

For thoose who stuck in bootloader this is how to unstuck:

1. Get Mtty here:
http://rapidshare.com/files/28321691/mtty1.42.zip.html
2. Right Click Activesync icon in tray, and select connection setting, then un-mark Allow USB connections at Activesync Connection settings.

3. Extract the zip file and Run mtty.exe and select USB from the Port dropdows list and then click OK button.

4. press Enter two times for showin USB>
5. Type:
set 14 0
[ENTER]
task 8
[ENTER]
(for soft-reset).

6. Ur device should reset and u might close mtty utility.
7. Done.

ur device should be just fine... if not try to re-flash the OS again while in Bootloader (press and hold POWER+RECORD button then press RESET)

re-enable/re-mark Activesync after this proccess might necesarry, to allow USB Connection again for enablin Activesync ur pda with ur PC.

Re: 6700 help
 

I tried both programs but both don't see the usb. I did follow everything to a T after my first mistake. I read the post and ALL the replies about 2.05 bootloader but I didn't find a fix for my issue. Thank again
EDIT: I forgot to add my OS on my desktop is xp64 and the OS on my laptop is XP pro. I've tried both PCs with the same outcome.

Re: 6700 help
 

I had the same issue, try running the newest OEM rom, I tried 3 older roms to no avail but the 6.1 rom worked without a hitch... Hope it works for you

Re: 6700 help
 

sent ya thanks.... fired right up after being stuck on the serial 2.0.5 screen:headbang: