Re: Setting up and Using Wmwifirouter
 

You might want to check

Setting/Connections/Wi-Fi/Network Adapters

go through the list of adapters and check the status "Use server-assigned IP address" or "Use specific IP address"

I always have to recheck this area, due to wifirouter changing the "tiacxwin Compatible Wireless Ethernet" adapters from "Use server-assigned IP address" to "Use specific IP address" and having issue when I want to connect using regular wifi to a hotspot..it will sit there all day trying to connect untill I change it back to "Use server-assigned IP address".

Re: Setting up and Using Wmwifirouter
 

I did notice that when it connects via wmwifirouter in the network settings it still has "User server assigned IP address." The IP address below it has 169.254.x.x (I don't remember the exact numbers for the 'x'). I tried changing it to Use Specific IP address and the PC still gets a self assigned IP address. Is there a way to manually enter an IP address in the registry that it will use?

Re: Setting up and Using Wmwifirouter
 

I have the Nex rom with baked in WMWifi 0.9.1, does not seem to work, i test my ICS through usb with sucess, but when i run WMWifi it says its ready but i get no broadcast of a wireless signal on my laptop or any other devices. The v1 I just downloaded is a trial wondering how i remove the previous version if it was baked in?

Re: Setting up and Using Wmwifirouter
 

If you baked it with .91 then you would need to rebake without it I belive. I'm not sure if you can remove it from the extended roms area or not. I would just rebake and then install it again.

Re: Setting up and Using Wmwifirouter
 

I keep having the following problem with .91. I get through the connect process, but it says WAITING FOR ICS at the end. So, I don't think it is binding with the WIFI connection. Strange thing is, it worked fine before. any thoughts?

Re: Setting up and Using Wmwifirouter
 

I finally figured it out. You don't need to connect it to a computer but you'll need to connect it to some kind of usb source. I connected my mogul to my wall charger and it went through without a hitch. I started to figure it out when I was looking at ICS and it says that PC Connection was USB.

Re: Setting up and Using Wmwifirouter
 

hi.. using .91. i can connect no problem and have full web functionality, but only over a non-secure method. when i change the security to Open Wep, i enter a five digit code, and then enter than same code on my laptop..
i can then get a secured wifi connection - but i can NOT get any web access.. IE just displays page not found.
i know i am missing something in my advanced network setup on my laptop. i've tried to manually enter the DNS and IP settings, but i still can't get web access..
again, i can establish a secure connection, but can't browse!

i can't seem to 'save' my settings on my wireless manager on the laptop, and i think this may be part of the problem in getting out on the secure connection.. (see attached picture)

anyone have any thoughts, or been through this before ?

Re: Setting up and Using Wmwifirouter
 

Question, I can get my WMwifirouter to connect and I can see it from my laptop or other wifi device, but I can get no data. It says "connecting...WLAN is on...waiting for ICS" well I check ICS and it says its connected. Has anyone had this issue. I am using WMWiFiRouter vs. 091. Thanks in advance,

Tp

Re: Setting up and Using Wmwifirouter
 

look up four posts, I have this same issue. not really sure what is going on.

Re: Setting up and Using Wmwifirouter
 

[quote=Nickles;256090]hi.. using .91. i can connect no problem and have full web functionality,

Hey Nickles, what are you doing to connect. Are there any tricks? Some of us can't seem to get the phone to connect at all. It says, "Connecting....WLAN IS ON! Waiting for ICS". Any help would be appreciated.

Tp