PPCGeeks
Page 4 of 13 « First 23 4 56 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Apache (http://forum.ppcgeeks.com/forumdisplay.php?f=14)
-   -   1.43 radio (http://forum.ppcgeeks.com/showthread.php?t=10044)

charleskincade 10-21-2007 04:40 PM
Update***
Ok, this is what I did. First I had to copy the current ruu files and then paste it in Pheonix'x 1.41 radio update. Once I pasted I then replaced it. Then I upgraded. So far it was successful. I then did a soft reset and checked my device info. It took and the radio now reads 1.43! Hooray! Hopefully this will help someone else

guitardoc64 10-21-2007 09:58 PM
Quote:
Originally Posted by adrian2pm (Post 103861)
will this work on the new 6800 sprint? thanks
Since it's for the 6700, it would probably not work, and/or brick your phone.

guitardoc64 10-21-2007 10:00 PM
Quote:
Originally Posted by charleskincade (Post 103976)
Update***
Ok, this is what I did. First I had to copy the current ruu files and then paste it in Pheonix'x 1.41 radio update. Once I pasted I then replaced it. Then I upgraded. So far it was successful. I then did a soft reset and checked my device info. It took and the radio now reads 1.43! Hooray! Hopefully this will help someone else
Hmmm. I got the country ID error. Any Ideas?

avaya 10-21-2007 10:04 PM
Quote:
Originally Posted by guitardoc64 (Post 104163)
Hmmm. I got the country ID error. Any Ideas?

read post #22 on page 2 of this thread..

-avaya

guitardoc64 10-21-2007 10:14 PM
Quote:
Originally Posted by avaya (Post 104168)
read post #22 on page 2 of this thread..

-avaya
Ok. I'd tried it with the Phoenix UG util which is basically the same, minus the Exit Bootloader utility but just for kicks, Ill try that too. Funny, I'd read the post and assumed that I'd basically done the same thing since the upgrade utility is a no_id....

pierocksmysocks 10-21-2007 11:05 PM
Just thought I'd throw this out there I put all the new radio files with the old 1.41 files so it'll make upgrading the radio easier. They're located here if anyone wants them.

s10onn2o 10-21-2007 11:31 PM
i hope this will help everyone
 
1 Attachment(s)
this is how i upgraded my radio works great just unrar and run noid just like any other rom or radio upgrade.


this is a set up from HELMI 3.5 kitchen and is JUST the radio upgrade.

guitardoc64 10-21-2007 11:45 PM
Quote:
Originally Posted by s10onn2o (Post 104237)
this is how i upgraded my radio works great just unrar and run noid just like any other rom or radio upgrade.


this is a set up from HELMI 3.5 kitchen and is JUST the radio upgrade.
Nice, gonna give that a try! I was about to start putting one together, been a busy w-end with WM6, Tiermann's new Oemizer, and this....whew! Thanks much!

guitardoc64 10-21-2007 11:55 PM
Ok, I tried every possible suggestion and I still get country ID errors...I wonder if it's the bootloader?

sldavis 10-22-2007 01:40 AM
Quote:
Originally Posted by quadz24 (Post 102969)
I aslo used the way Everburg suggusted for my Sprint PPC6700. I used the Helmi_APAC_Official_AKU3.5_Kitchen_1.0.4 and extracted the folder \Upgrade\NoID_RUU and placed the Radio_.nbf file into the folder. Put my PPC6700 in bootloader mode and I ran the radio update by running the APACUpgradeUt_noID.exe command. after the update completed i did not do the hard reset. I just did a soft reset and the radio has been working fine. I have not tested the radio anywhere but here at work but i do have a 1-2 extra bars on the signal meter.
I tried flashing this way and it worked! Thanks for the hint... I did not preform a hard rest I and everything seems to be working fine although I'm not noticing any signal improvement in my reception I'm still on the border of x1 and EVDO in my house if i'm lucky I get 1 bar of EVDO mostly I go into roam 1x Ive been running the new radio for about 4hr and I don't see much change


All times are GMT -4. The time now is 07:19 AM.
Page 4 of 13 « First 23 4 56 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0