PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Apache Development (http://forum.ppcgeeks.com/forumdisplay.php?f=53)
-   -   HTC Performance (overclocking) OEM (http://forum.ppcgeeks.com/showthread.php?t=11573)

weedahoe 02-02-2009 03:20 PM

Re: HTC Performance (overclocking) OEM
 
He wasnt giving an assumption but was giving an analogy to help others better understand what it is you are trying to do.

But again, why are you wasting your time on a dead device that USED to be so popular but is used by a very small percentage of the PPC population? Im not saying youre not smart because IDK you but it just seems to make more sense to invest your time and mental energy in a device that has future potential and not one of the past.

We all know and have known it can safely go to 624. We all know all of it has to be compatable or else thier would have been severe issues with it when we all stepped it up. But you want to speed something up that no one used anymore and even if you did it OC it, it would be like taking that 800 hp engine in ggurusuas' chevette and running it on fumes because it is still severely limited my its RAM when compared to todays higher applications and devices.

tronnixx 02-02-2009 04:23 PM

Re: HTC Performance (overclocking) OEM
 
Quote:

Originally Posted by weedahoe (Post 684611)
He wasnt giving an assumption but was giving an analogy to help others better understand what it is you are trying to do.

But again, why are you wasting your time on a dead device that USED to be so popular but is used by a very small percentage of the PPC population? Im not saying youre not smart because IDK you but it just seems to make more sense to invest your time and mental energy in a device that has future potential and not one of the past.

We all know and have known it can safely go to 624. We all know all of it has to be compatable or else thier would have been severe issues with it when we all stepped it up. But you want to speed something up that no one used anymore and even if you did it OC it, it would be like taking that 800 hp engine in ggurusuas' chevette and running it on fumes because it is still severely limited my its RAM when compared to todays higher applications and devices.

I still use this phone for myself and I bet there are still others out there using it so I do not consider it a waist of time. To be honest, I am waisting more time arguing with the other guy about whether or not it is a system on a chip or not. That was a waist of time.

If you, or anyone has a question on a newer phone like the Touch I would be more than happy to help with that too. I am familur with most of the new processors but I kept on seeing these posts all over the web about the HTC Performance utility and if it actually works or not so I just thought I would help resolve and put it to rest you follow?

p.s. If that's your dog in the pic it's huge!!! Dogs are great. I got a Black Lab/pitbull mix.

weedahoe 02-03-2009 08:20 AM

Re: HTC Performance (overclocking) OEM
 
Not trying to argue here but look at the stats of how many hits and posts a day the 6700 forum gets v/s the Titan/Mogul or TP and you will see what I am saying about people no longer using the 6700. But again, since you have one and are passionate about doing something with it, kudos to you brother. IDK how long you have been lurking but understand this, if you have the understandings and trainings as well as background education to do things of this nature then (me personally) it would make more sense to apply that to the 6800/TP because no one has ever been able to 'step it' or OC it whereas the 6700 has been mastered by many.

That dog in the avatar is not mine but is like mine. I do have an avatar of mine but the avatars are too small here so I had to Google one. That is a Mastiff AKA English Mastiff. All males will reach or exceed 200lbs. I have 3 Mastiffs and a Rottie.

tronnixx 02-03-2009 01:00 PM

Re: HTC Performance (overclocking) OEM
 
Quote:

Originally Posted by weedahoe (Post 686112)
Not trying to argue here but look at the stats of how many hits and posts a day the 6700 forum gets v/s the Titan/Mogul or TP and you will see what I am saying about people no longer using the 6700. But again, since you have one and are passionate about doing something with it, kudos to you brother. IDK how long you have been lurking but understand this, if you have the understandings and trainings as well as background education to do things of this nature then (me personally) it would make more sense to apply that to the 6800/TP because no one has ever been able to 'step it' or OC it whereas the 6700 has been mastered by many.

That dog in the avatar is not mine but is like mine. I do have an avatar of mine but the avatars are too small here so I had to Google one. That is a Mastiff AKA English Mastiff. All males will reach or exceed 200lbs. I have 3 Mastiffs and a Rottie.

200lbs? Damn!

Let me ask you, the "TP" your speaking of is the Touch Pro? The qualcomm cpu? I know the OMAP can be stepped but I don't know much about the
qualcomm cpu but I will check it out and see. If people have tried but could not step it chances are you cant (easily anyways). The CPU has to be able to support dynamic voltage management (DVM), have a clkset parameter or basically some type of software configurable parameters of the cpu's voltage, freq, multipliers, etc. for it to be soft stepped. If these parameters are not software configurable then the only other chance is hardware clocking which is a bit involved and risky. Just confirm for me if its the qualcomm and cpu model and I will look into it for you...

p.s. Qualcomm sucks with product documentation. It's difficult to find qualcomm info, it seams much of it needs to be requested so I will have to contact them for the technical documents unless anyone else here has them already.

weedahoe 02-03-2009 04:04 PM

Re: HTC Performance (overclocking) OEM
 
Yeah I was saying the TP (Touch Pro) but I meant the Titan/Mogul/6800. Sry.

demonlordoftheround 02-03-2009 06:21 PM

Re: HTC Performance (overclocking) OEM
 
I did a quick search for qualcomm overclocking info and everything is over a year old. Looks like some people thought about it, but never developed anything.

tronnixx 02-04-2009 01:36 PM

Re: HTC Performance (overclocking) OEM
 
It seams they both utilize the qualcomm, the 6800 uses the msm7500 (400mhz) and the touch pro the MSM7201A (528mhz)...

Ok, well as you know the same method would probably work on both but it's finding the method if it exists, if not hardware clocking is the only option.

I e-mailed qualcomm for a Developers Refference and e-mailed HTC for a API Integration guide. More then likely Qualcomm will get me something because I have heard others complaining about HTC not being developer friendly...

I will keep you guys updated, I cannot do much without the developer refferences. If anyone ever breaks there 6800 or touch pro beyond repair I could use that too, only once I have Qualcomms refference. It doesnt matter if the LCD or any other external component is broken. I just would need the internal board with the processor and I can access it via the serial/usb ports.

If I can get that guide from qualcomm I might not even need one to experiment with it all depends if it's software clockable. If it is I don't need it, if its not I will have to hardware clock but cant do that without the hardware.

I will keep looking... Your help is appreciated, I clicked the Thanks button.

gguruusa 02-06-2009 01:20 AM

Re: HTC Performance (overclocking) OEM
 
Quote:

Originally Posted by tronnixx (Post 684522)
You just made me pull my hair out... :-|
It's not off base at all. You may not be able to tell me about the engineering of it, but I can assure you that I can.

So enlighten me. So far, all you've done is spout off about how the xscale can run faster and completely dismissed what effect that might have on the rest of the system. Heck, you've completely dismissed that there IS a rest of the system.
Quote:

I have worked with the XScale in many embedded systems. It's part of what I do...
good for you. Not relevent to the subject at hand, however, as we both agree that the component itself is designed to run at higher speeds under normal conditions.

Quote:

The processor in the 6700 is most of the system, hence that is why they call it a System on Chip.
lol - you've got that completely backwards. It's called a SoC because you don't need much more for a base system, not because in a given application there isn't much more. BTW, there is quite a bit more in these devices than just the CPU - you don't even have to open the case to know that.
[quote]But what I am telling you is that it is designed to run safely at up to 624Mhz. Again, it will run warmer but it will not damage it. [quote]Yep. No argument that the PXA270 can do it. Like I said though, there are other parts to the system, and you can't answer the question without factoring their performance in as well.[quote]HTC and many other OEMs choose the XScale (or other SoCs) because they contain most of the system within and therefore it means less engineering and external components.[quote]yep. Lot's of good benefit from using standard, well-known parts.
Quote:

You cannot compare the XScale to a Intel Pentium, or a car for that matter.
Sure you can, it just depends on how detailed you want to be. Obviously you're not going to use a gas engine as your CPU, but clearly cars and electronics can react poorly when stock parts are run outside of their stock configurations. <--- that's a comparison of an xscale, a pentium, and a car, in case you missed it.
Quote:

The XScale contains MOST of the internal systems that would be affected by a clock change.
see the word MOST there? Unless it's ALL, you haven't finished your research. And lets not even get into that you're looking at them discretely as well as assuming standard operating conditions.
Quote:

The only components external to the CPU that would be affected by the speed of the proccessor would be the EEPROM/RAM/ROM chips but it would not damage them because the requirments on the pxa270 for the memory are compatible at 624mhz too.. I did my research :-)
Not enough research, though. There are plenty more systems in the phone external to the PXA270 than memory, and speed isn't the only factor.

Quote:

Now, indirectly speeding up the clock increases current draw (of course) on other components but the power devices and hardware in the XV6700 can tolerate it. It's quite a well built system.
and there, of course, is the big quesiton: How do you know it? Unless you work for HTC, it's unlikely you have engineering drawings, so what you're really doing is providing a (hopefully educated) guess - which is quite a bit different than fact.

Quote:

I don't understand how people that don't understand the inner engineering of something can argue with someone who does...
Exactly. A whole company of engineers with *gasp* actual data *gasp* decided to sell it at 400mHz, but they're no match for your powers of deduction. Frankly, your focus on the PXA270 as all you need to look at screams inexperience, at a minimum.

Quote:

Please, do your research before making such an assumption... If you would like to continue this debate on a technical level go to: http://www.phytec.com/pdf/datasheets/PXA270_DS.pdf (PXA270 Design PDF). In particular, look at Page 14 (The Block Diagram). Most of the systems built in to this processor are those that are on the motherboard in a typical PC. Such as Real-Time Clocks, Serial UARTS, etc.
What'd be the point? There isn't any disagreement that the PXA270 is designed to handle it under normal conditions. The question is whether "normal conditions" are all it's going to see and how the rest of the system is going to fare.

It boils down to this: There is precious little technical info available with which to answer the question, and without knowing WHY the phone is sold everywhere at 400Mhz, it is consequently difficult to answer definitively if running it faster will damage it in a material way.

nuguy 02-06-2009 01:56 AM

Re: HTC Performance (overclocking) OEM
 
Ok guys, I have a couple old 6700's layin around and keep thinking about projects for them, so I for one would be happy to hear about some actual progress here instead of bickering.

I am using a 6800 and have a spare so that would be great to find a new bump for too.

Who cares if the guy wants to "waste his time" on an obsolete device. It is his time after all.. _s well there are still other people who are using the damned things too.

So I for one say: lead, follow, or get out of the way!

weedahoe 02-06-2009 08:26 AM

Re: HTC Performance (overclocking) OEM
 
Quote:

Originally Posted by nuguy (Post 693702)
Ok guys, I have a couple old 6700's layin around and keep thinking about projects for them, so I for one would be happy to hear about some actual progress here instead of bickering.

I am using a 6800 and have a spare so that would be great to find a new bump for too.

Who cares if the guy wants to "waste his time" on an obsolete device. It is his time after all.. _s well there are still other people who are using the damned things too.

So I for one say: lead, follow, or get out of the way!

What progress are you expecting to see that isnt already there for the 67. This entire thread is about OC'ing and there are already several apps (my favorite is Pocket Hack Master) and we have known for years that the 67 can go up to 624. Almost everyones device can handle 624 while a minute few will lock up at 624 and NO ONE can go above 624. So what progress are you expecting. With its now aging hardware architecture and limited RAM (when compared to newer models) it is IMO it isnt worth looking into further when (there again) it cant go past 624.

nuguy 02-06-2009 12:49 PM

Re: HTC Performance (overclocking) OEM
 
Wedeahoe:

Dude you are a very respected member here, I say this with love in my heart for you my fellow ppcgeek:

rant on

Knock it off, why waste your time - if you don't think the project is worthy - don't waste your time trying to get someone to *not* do something with there time.

Nobody is asking for your participation or blessing to try something different.

Who knows perhaps he comes up with something worthwhile, perhaps he doesn't - but you guys could quit 'jacking the thread with argumentive negativity.

/rant

On a lighter side, everytime I see your user ID I chuckle and say to myself...
who da ho?
weedahoe!

(that's meant as compliment)

weedahoe 02-06-2009 02:39 PM

Re: HTC Performance (overclocking) OEM
 
Quote:

Originally Posted by nuguy (Post 694468)
Wedeahoe:

Dude you are a very respected member here, I say this with love in my heart for you my fellow ppcgeek:

rant on

Knock it off, why waste your time - if you don't think the project is worthy - don't waste your time trying to get someone to *not* do something with there time.

Nobody is asking for your participation or blessing to try something different.

Who knows perhaps he comes up with something worthwhile, perhaps he doesn't - but you guys could quit 'jacking the thread with argumentive negativity.

/rant

On a lighter side, everytime I see your user ID I chuckle and say to myself...
who da ho?
weedahoe!

(that's meant as compliment)

Hey, if you like the name, then come see the avatar on Google Latitude. The OCing on the 67 is done. I would like to see someone do it on the 68,

nuguy 02-06-2009 04:34 PM

Re: HTC Performance (overclocking) OEM
 
Quote:

Originally Posted by weedahoe (Post 694829)
I would like to see someone do it on the 6800

:thumbleft:Thumbs Up to that!

tronnixx 02-07-2009 02:34 PM

Re: HTC Performance (overclocking) OEM
 
gguruusa, your post was confusing. I said there were other systems but the systems affected by the clock are internal to the pxa. Are you saying there are other systems affected by the cpu clock not internal besides the eeproms? Which components or systems are you speaking of? I dont want to annoy people here going back and forth so if you would like e-mail me we could discuss it.
----------------------------------------------------------------------------------------------------------------
Sorry for the delay guys; I got caught up with a company research/development project :-(

I got my e-mail back from qualcomm on the msm cpu. Do you believe this???

"Thanks for your interest in Qualcomm's CDMA Technology Chip Sets. Unfortunately, any information other than you can find on our web site is Proprietary to Licensees.
Here is the Qualcomm web site."

The only problem is, there is nothing on their site about it other than a 1-page sales pitch. Intel put it all out there. This is probably one of the reasons I think people have not done too much with this cpu. This is going to be a hard one guys.

I just e-mailed them again from a company e-mail and I might have to play the "Interested in Qualcomm products" angle. I will let you know what I get back..

Does anyone know of at least a semi-successful overclock of the 6800? Even if it freezes up. Windows CE and Mobile has a driver that as long as the OEM supports it enables a software multiplier change but without Qualcomm's developer manuals, it's not looking too good. WizCode from Pocket Hack Master is also looking for it according to his forums. If someone can get this you will have your overclock app shortly after.

and also, does anyone know where I can get a ROM for the 6800? I could try to tear it apart for the driver, just really a long shot finding it that way. That developer manual is the key.

How do you guys like the 6800 or Touch Pro? Is it fast? Does it run slow in some apps like the 6700 did?

tronnixx 02-07-2009 04:19 PM

Re: HTC Performance (overclocking) OEM
 
6800 / Touch Pro (Or Any Qualcomm MSM-based Phone)

Somewhat better news: I found some stuff on the internet confirming this processor does support Dynamic Voltage Management.

Since I am having a hard time finding manuals for the qualcomm cpu in these phones I need to figure out a few things about their power management abilities.

Therefore, If anyone has a benchmarking utility loaded on their phone such as GXMark or better I have a little experiment I need you to do. It's Simple.

1) Test the CPU Index of the Phone at 100% battery (Has to be unplugged)
2) Test the CPU index of the phone when it's plugged in and fully charged.
3) Optional, test the CPU index of the phone at low battery.

I am trying to determine the power management on this phone so we can figure out a way of speeding it up since I dont own one (Still on the 6700).

You may notice a big increase in the cpu index when plugged in because the system is disabling scaling (forcing it to the maximum standard frequency).

Let me know your results. Thanks!

kyrumo 02-08-2009 02:51 PM

Re: HTC Performance (overclocking) OEM
 
Thanks :-)

tronnixx 02-08-2009 03:56 PM

Re: HTC Performance (overclocking) OEM
 
Quote:

Originally Posted by kyrumo (Post 698881)
Thanks :-)

hi kyrumo, thanks for what?

wraith79 02-09-2009 02:56 AM

Re: HTC Performance (overclocking) OEM
 
1 Attachment(s)
For those looking for the app, as-is, here it is! Enjoy

gguruusa 02-09-2009 12:38 PM

Re: HTC Performance (overclocking) OEM
 
Quote:

Originally Posted by wraith79 (Post 700254)
For those looking for the app, as-is, here it is! Enjoy

It's also in the kitchen.

psicobra 02-15-2009 05:17 PM

Re: HTC Performance (overclocking) OEM
 
hi guys first time posting i have just downloaded this app installed and supposedly over clocked my CPU but when i look at the hardware tab it still says 400MHZ and youtube still doesnt handle high quality video any better have i done somthing wrong?

thanks

demonlordoftheround 02-15-2009 06:23 PM

Re: HTC Performance (overclocking) OEM
 
Nothing is wrong, this doesn't work on the Titan.

weedahoe 02-16-2009 09:21 AM

Re: HTC Performance (overclocking) OEM
 
Quote:

Originally Posted by psicobra (Post 714324)
hi guys first time posting i have just downloaded this app installed and supposedly over clocked my CPU but when i look at the hardware tab it still says 400MHZ and youtube still doesnt handle high quality video any better have i done somthing wrong?

thanks

Its doesnt change anything in the hardware tab. You will either "notice" a change in performance or you can use certain benchmark tools to see where the differences are. As for the Youtube issues, it could be a caching issue. Can you play regulay WMV/MPG files ok from main memory?

tryboy 02-18-2009 01:13 PM

Re: HTC Performance (overclocking) OEM
 
It seems fine.Thanks

PDAPhoneJunkie 02-18-2009 11:41 PM

Re: HTC Performance (overclocking) OEM
 
Quote:

Originally Posted by weedahoe (Post 715371)
Its doesnt change anything in the hardware tab. You will either "notice" a change in performance or you can use certain benchmark tools to see where the differences are. As for the Youtube issues, it could be a caching issue. Can you play regulay WMV/MPG files ok from main memory?

Well put... You will notice the phone being a little snapier.

oscarhannud 09-28-2010 12:53 PM

Re: HTC Performance (overclocking) OEM
 
I have a Tytn II/Kaiser and didn`t work for me :(


All times are GMT -4. The time now is 11:54 PM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0