PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Apache Development (http://forum.ppcgeeks.com/forumdisplay.php?f=53)
-   -   Apache WM6 Kitchen CE OS 5.2.1908 (Build 18508.0.7.0) 071108_1 Bugs/Patches (http://forum.ppcgeeks.com/showthread.php?t=11362)

ajgalbraith98 11-17-2007 11:23 AM

SPB Link, Hmm i tried directly out of your post and link was fine...
 
Quote:

Originally Posted by hefman (Post 123946)
Wanted to try this out, but the link appears to be broken...

Hmm i tried directly out of your post's quote of mine, and link was fine...
Maybe my server was down...try it again...

ajgalbraith98 11-17-2007 11:24 AM

Quote:

Originally Posted by jsavin (Post 124034)
There's a thread about this on the SPB Club (SPB's forum site), with specific information about what goes inside these reg keys:

http://www.spbclub.com/forum/viewtopic.php?p=59189

HTH, -Jake

yeah, if you check my rgu they are all there... but I am going to poke arond the club for help.

--ajgalbraith98

hefman 11-17-2007 11:45 AM

Quote:

Originally Posted by ajgalbraith98 (Post 124107)
Hmm i tried directly out of your post's quote of mine, and link was fine...
Maybe my server was down...try it again...

Your site must have been down last night. I just downloaded it. I'll check it out tonight. Thx...

hefman 11-17-2007 11:58 AM

Quote:

Originally Posted by ajgalbraith98 (Post 124108)
yeah, if you check my rgu they are all there... but I am going to poke arond the club for help.

--ajgalbraith98

Did a quick check of your rgu. One thing you might try is adding an "Enabled" DWORD value (set to 1) for an application that currently doesn't work and test it. The enabled value is required when you add a new application, so it may help trigger it to work on an OEM ROM install. Just a thought.

ajgalbraith98 11-17-2007 02:05 PM

Quote:

Originally Posted by hefman (Post 124122)
Did a quick check of your rgu. One thing you might try is adding an "Enabled" DWORD value (set to 1) for an application that currently doesn't work and test it. The enabled value is required when you add a new application, so it may help trigger it to work on an OEM ROM install. Just a thought.

yeah I tried that in my own testing.. that setting is reflected in the CPL gui by the check box next to each item, but so far I can't see that portion of the GUI no matter what i do. in theory even if they ALL did not have the setting you would see the "SmartScroll", but see no apps OR all the apps but no check boxes.

schettj 11-17-2007 03:38 PM

We might want to pull SprintTV out of the OEM packages. It is now officially DOA on the Sprint server side - unauthorized user is what you'll get on connect. Seems they finally figured out how to turn off access :p Or at least put some disclaimer in, until/unless Sprint reopens access.

guitardoc64 11-17-2007 04:59 PM

Quote:

Originally Posted by schettj (Post 124240)
We might want to pull SprintTV out of the OEM packages. It is now officially DOA on the Sprint server side - unauthorized user is what you'll get on connect. Seems they finally figured out how to turn off access :p Or at least put some disclaimer in, until/unless Sprint reopens access.

Ditto here, It caused too many problems in the builds anyway. The last 2 times I tried to include it it caused lockups on the first boot screen, and unchecking it fixed the problem.
Not that I miss it anyway.....

awdnut 11-17-2007 06:10 PM

BT Audio Skipping w/jabra 8010
 
I love this latest work. So much potential here!

One flaw I just CANNOT fix.. I was on a previous build 3.5(?) with Toggle BT and my audio sucked but it was functional.

Here's my situation:

HTC Apache
No WiFi enabled
MP3 copied to internal storage
Using WMP to play the MP3
Sounds good, no skipping, the phone plays it fine
Goto Bluetooth
Select the Jabra 8010
Select "Set as Wireless Stereo"
All audio transfers to the headset
No music though
Pause/Play toggle and music comes on for ~3 seconds
During those 3 seconds I'd swear the music is much better than the previous build
Music will cut in and out at random, like a CPU issue
I've tried:
- overclocking (no effect)
- disabling the stereo feature in Advanced Config
- increased the sampling rate in Advance Config (it was at 44k and I went to 48k)
- rebuilt/reflashed the phone with and without MS voice command
- unpaired, repaired, reset, and even flashed the 8010s to the latest firmware 1-40-0
- loading "Audio Gateway" thinking that might help like Toggle BT
- tried using the phone first then the music
- checked Jabra's site for tips
- searched Google for all sorts of "skipping" "pausing" keywords that had me all over PDAPhone.com
- I've searched here and found some people used a "broadcomm BT stack"? I must be spelling it wrong, where is it?
- Tried to find an installable copy of Toggle BT (I have it in a RAR set when I backed up my laptop, but that's a HUGE mess..)

I'm finally going to be a lamah and just post a plea for help even though I seem to be the only one on the planet with this issue!?

OMG! Hahaha.. I just tried to set an MP3 as ringtone, went into the ringtone test and the whole song plays without hiccups! Looks like I need a better media player?
UPDATE: And now it stopped working flawlessly.. It chunks out and skips when I set an MP3 ringtone and preview it. I'm gonna toss it back in the kitchen again.

schettj 11-17-2007 06:43 PM

I really like mortplayer, but then I'm pretty sure any player is better then WMP.

awdnut 11-17-2007 07:17 PM

MortPlayer looks great.. Too bad it doesn't play to the headset at all for me??!

I transfer the audio to the headset and MortPlayer is the only app still playing on the PPC speaker!!?!

I went throught he MortPlayer setup and I can't see any options that would make it ignore the headset and play on the internal PPC speaker.. Too wierd!

My last build in the kitchen included the HTC Audio Manager but that doesn't look like a music player, the "Player" option in the menu is grey'd out?

mad5950 11-17-2007 07:43 PM

Speakerphone issues?
 
Has anyone else experienced this? When I get a phone call and answer using either the "send" key or the "answer" button on the dialer, the call goes automatically to speakerphone. Then the phone says I missed the call even though I can continue to talk to the caller and am able to turn of the speaker. The "in call" screen shows unknown caller, while the "missed call" screen shows the actual call. Other than that it is a great build. Thanks to all involved.=D>

tr2518 11-17-2007 07:50 PM

Quote:

Originally Posted by mad5950 (Post 124378)
Has anyone else experienced this? When I get a phone call and answer using either the "send" key or the "answer" button on the dialer, the call goes automatically to speakerphone. Then the phone says I missed the call even though I can continue to talk to the caller and am able to turn of the speaker. The "in call" screen shows unknown caller, while the "missed call" screen shows the actual call. Other than that it is a great build. Thanks to all involved.=D>

I have been experiencing the same thing today. I just flashed my phone again last night. I was using it to watch a football game with ORB when it happened so I didn't think much about it.

ajgalbraith98 11-18-2007 02:56 PM

Yeah Yeah Yeah
 
Quote:

Originally Posted by ajgalbraith98 (Post 123487)
SPB Plus 4.01 fixed (I was also unable to get smart scrolling to work EXCEPT it does work in PIE, which i find the most useful spot for it anyway)

http://www.ajgalbraith98.com/ppcgeek...1_11-15-07.rar

I have figured out smart scrolling and will upload a new OEM this afternoon...sorry to wet your appetite, but i was too excited to not say but too busy to finish it.

--ajgalbraith98

btw SPB plus 4.02 is in Beta 1...

You can get this now at http://www.ajgalbraith98.com/ppcgeeks/SPBPlus_401_11-18-07.rar

stretch 11-19-2007 01:19 AM

Awesome! Thanks a ton for all your work on this. It really makes life great for guys like me that mooch off your genius. :)

sdruid 11-19-2007 11:03 PM

When I run the buildos program I get several errors with the first being -> unknown carrier type, and then module PPCGeeks_OEM.rar not found, then a lot of other modules not found - most of them office mobile related....

any ideas ?

guitardoc64 11-19-2007 11:15 PM

Quote:

Originally Posted by sdruid (Post 126012)
When I run the buildos program I get several errors with the first being -> unknown carrier type, and then module PPCGeeks_OEM.rar not found, then a lot of other modules not found - most of them office mobile related....

any ideas ?

Ditto Here. I did try copying Tiermann's split office, and got a duplicate GUID error for each. I did download both the new build OS and OEM, and installed them just like the last release. Is there a way to select carrier to fix the carrier type?

sdruid 11-20-2007 12:22 AM

I looked at the contents of the PPCGeeks_OEM.rar archive and was wondering if it is possible to install the apps listed there separately after the custom rom is created and the phone is running in case I wanted to install the apps some place else temporarily to try them out ?

Thanks...

sdruid 11-20-2007 12:33 AM

Ok,
I got the initial startup errors fixed by removing the split office, and selecting my carrier after the buildos loads completely, exiting and restarting.
I also downloaded the PPCGeeks_OEM.rar file via ftp and saved it in the WM6 directory.

My next error is: error building default.hv and user.hv

any ideas ?

gguruusa 11-20-2007 07:41 AM

Quote:

Originally Posted by sdruid (Post 126080)
Ok,
I got the initial startup errors fixed by removing the split office, and selecting my carrier after the buildos loads completely, exiting and restarting.
I also downloaded the PPCGeeks_OEM.rar file via ftp and saved it in the WM6 directory.

My next error is: error building default.hv and user.hv

any ideas ?

what did you add to the kitchen? errors building default.hv and user.hv indicate problems with .rgu files.

charleskincade 11-20-2007 07:11 PM

has anyone been able to solve the battery drainage problem? It probably has been coverd already but I've been away for a week or so.

guitardoc64 11-20-2007 09:19 PM

Quote:

Originally Posted by charleskincade (Post 126745)
has anyone been able to solve the battery drainage problem? It probably has been coverd already but I've been away for a week or so.

Yep, got a couple of fixes last week. To save ya a bunch of searching here's the file. It's a .cab installer. There was talk about adding the registry changes to the new kitchen update as well, but I'm not positive that they got the chance. This is an easy and immediate fix. It got my power usage to about where it was in the WM5 ROM.

luv2chill 11-20-2007 10:15 PM

Those registry entries have been in the kitchen since the first release, but they were not being processed correctly. As of the 20071117 revision that has been fixed and they are being added in successfully.

guitardoc64 11-21-2007 12:00 AM

Quote:

Originally Posted by luv2chill (Post 126878)
Those registry entries have been in the kitchen since the first release, but they were not being processed correctly. As of the 20071117 revision that has been fixed and they are being added in successfully.

Sorry Luv, senior moment on my part. I remember now your post that the entries were there but being overwritten, and the next release would solve the issue. I haven't had the opportunity to flash a new ROM yet with the new release. I figured the cab would help those like me that haven't had the opp to reflash with the new release. Glad to hear that it's solved in the new kitchen, and I'll probably recook tomorrow eve. Can't wait any longer!

n8mack33 11-21-2007 12:29 PM

I'm still getting the "Unknown Carrier Type" error when I open BuildOS. And then when I try to flash I get a FAT16 filesize error (and yes I am SURE I am using the correct folder for the prj). I am a Verizon user. When I remove the Office progs from the oem rar it gives me the same Carrier error and also an error that the modules were not found.

Any ideas?

delosky 11-21-2007 12:53 PM

Vibrating Dial Pad
 
Is anyone else having problems with the vibrating dial pad working? I cooked this into my ROM and it worked for a while but within the last week or so it only "default" beeps at me instead of vibrating:scratch:.

guitardoc64 11-21-2007 08:40 PM

Quote:

Originally Posted by n8mack33 (Post 127184)
I'm still getting the "Unknown Carrier Type" error when I open BuildOS. And then when I try to flash I get a FAT16 filesize error (and yes I am SURE I am using the correct folder for the prj). I am a Verizon user. When I remove the Office progs from the oem rar it gives me the same Carrier error and also an error that the modules were not found.

Any ideas?

Sure, simple fix. Figured it out all by myself ;) Open Build OS and wait for it to load completeley. Up on the top bar are Device,OS,RUU and Carrier. Click and select Verizon(in your case) and then click File on the top right hand and select save. This saves your carrier select to the selections file and eliminates the unknown carrier error, and will probably fix the other problems as well, since it sets the .prj pointers to look for your carrier.

mbartels 11-30-2007 02:50 PM

Quote:

Originally Posted by Snager (Post 121351)
Has anyone got their HButton to work? I cant seem to get mine working....i keep getting a popup error window telling me "Error opening the shortcut or locating the target filename."

Thank You

Still no resolution to this? I've searched and can't find an answer on why this doesn't work or how to fix it.

Thanks!

Robtao 12-05-2007 05:54 PM

Quote:

Originally Posted by Snager (Post 121351)
Has anyone got their HButton to work? I cant seem to get mine working....i keep getting a popup error window telling me "Error opening the shortcut or locating the target filename."

Thank You

Same for me on XV6700 with 11/17 Kitchen.

Robtao 12-28-2007 02:43 PM

Vibrate issues
 
Quote:

Originally Posted by broken041 (Post 123097)
I have cooked about 10 times overall. Just to play see how things work, yada yada. But. I can't get my phone to vibrate on an alarm. The box is checked to do so. The sound file plays, the screen lights up....just no vibrate. I've been late for work once now already. Hmm.
My other....I can't remember how it used to work, but. When I am on a phone call, the indicator goes from EV to 1X and then back to EV once the call is terminated.. Is that how it's supposed to work? I searched on that subject for awhile to no avail.
Ok...one more. When I am in a low service area within the normal calling area, sometime the roam indicator comes on. Odd I say.....

Thanks for listening....any help is appreciated.

My XV6700 stopped vibrating after updating with the latest kitchen. I just dropped it this AM when it rang (no vibrate) with an incoming call, and it started vibrating again when I picked it up. So it could be hardware.
Recommendation: If it won't vibrate for any app, try tapping it a bit. Maybe the vibrator is stuck.


All times are GMT -4. The time now is 12:57 AM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0