PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Apache Development (http://forum.ppcgeeks.com/forumdisplay.php?f=53)
-   -   Apache WM6 Aku 0.7 Kitchen (http://forum.ppcgeeks.com/showthread.php?t=10111)

verizonguy 10-29-2007 10:32 PM

Quote:

Originally Posted by Kolano (Post 109790)
Can you explain what needs to be done to accomplish this, it's been something I've been interested in for a while. I reset my phone far too often.

To accomplish what? set the time zone? simply click on the clock on the today screen and change your time zone, or go to Settings->Clock & Alarms

verizonguy 10-29-2007 10:56 PM

Quote:

Originally Posted by mbial (Post 109739)
VG,
I had no problem restoring the stock Sprint ROM using the normal RUU...this, however, had no impact on the blanked model no.

Any further suggestion? Thanks again for your continued efforts on this forum!

Best,
MJB

Attempt the following at your own risk, as with anything else...
download this:
http://wiki.xda-developers.com/uploads/mtty.exe
put your phone in bootloader mode.
on your pc, right click on the active sync icon, and under connection settings, uncheck "allow usb connections"
connect your phone via usb to your computer
start mtty
hit enter, you should see
usb>
type the following:
info 3
//then post the results here.
//now to exit cleanly, type the following:
set 14 0
// after that is done, type the following:
task 8
// this will exit bootloader and restart your phone.

For those reading this thread, do not mess around with mtty. It is a method of communicating with your device's bootloader and you can permanently make your phone unbootable with it if you're not careful.

runt 10-29-2007 11:06 PM

ok, where do we download .6c? all i can find is .6b on the ftp.

verizonguy 10-29-2007 11:09 PM

Quote:

Originally Posted by runt (Post 109870)
ok, where do we download .6c? all i can find is .6b on the ftp.

refresh the folder then. it's there.

runt 10-29-2007 11:14 PM

Quote:

Originally Posted by verizonguy (Post 109874)
refresh the folder then. it's there.

yep, after a refresh it showed up. i also setup the ftp site in filezilla, easier for me to use.

GaMedic 10-29-2007 11:40 PM

First Timer
 
I finally did my first ROM. I added new arcsoft OEM and I haven't had a chance to test it. I wanted to add palm threading but don't have OEM for that so I will install with CAB and test. I was unable to update may phone with *22899 so I installed touchclone dialer via cab and was able to update. For some reason everytime I install a cab or update and it says I must restart my phone it hangs at Windows Mobile screen (I guess this is called flash screen). If I reset with stylus from splash screen it starts fine after that. I will test more tommorrow night. Thanks for the kitchen and the great work you guys do! So easy a newbie can do it.=D>

jarmenti 10-29-2007 11:56 PM

hey verizonguy did what you said for mbial as i also have the blank model No, and live problems

info 3
HTCSµëm9ßY·C§YêWìöúŠ[ÜyÄY÷ œšÂ¡q#ÍHTCE
is what i get when i do that with mtty any ideas? i also patched my nvm_htc SuperCID replacing the CID (11111111) so now i can load using the normal updater instead of noidruu

runt 10-30-2007 12:11 AM

how do i figure out what bootloader my phone has so i don't brick it when i am done cooking my own rom?

nkawal 10-30-2007 12:18 AM

reverting back.........i keep having too many issues with the kitchen. Live services acting up... now i cant check emails, dialer sucks, cant see contacts pics. Nice try VG, will try again once its more stable. It is fast though, also like you posted before, storage card is much faster to access.

ajgalbraith98 10-30-2007 01:33 AM

Geek donation..i have more Gigs than I have dollars these days
 
Verizonguy or whoever. I have plenty of HTTP/FTP bandwidth and storage I'd like to donate to WM6. PM me


All times are GMT -4. The time now is 08:46 PM.

Powered by vBulletin® ©2000 - 2026, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0