PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   CDMA Treo Pro Development (http://forum.ppcgeeks.com/forumdisplay.php?f=102)
-   -   +++RaiderROM! WM 6.5.3 [04/27/2011] (http://forum.ppcgeeks.com/showthread.php?t=118751)

raiderfan247365 06-19-2010 11:03 AM

Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
Quote:

Originally Posted by manekineko (Post 1824160)
Just tried a custom ROM for the first time on my Treo Pro. It seems like after I installed it the Sprint data connection doesn't work anymore. I flashed back to stock and data worked fine. Flashed to Raider again, and data doesn't work again. Is there something I have to do to get data working?


You just gotta install THIS .cab file after flashing, it was posted on the first page :) maybe i should make a reference to it for you newbies!! You can also always set up a sprint connect by going in to start/settings/connections/connections -> "add a new modem connection" -> name connection "Power Vision" and select "Cellular Line" -> enter "#777" as the number -> leave "username", "password", and "domain" fields blank!
I figured i would post the steps as you might need them in your ROM flashing ventures! Good Luck

manekineko 06-19-2010 11:42 AM

Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
Quote:

Originally Posted by skeegcpp (Post 1817163)
go into the task mgr, close out the camera program. then re-launch it. it will work properly, after that

I ran into that problem on mine too that the camera button wasn't working, and it turns out that under Settings -> Personal -> Buttons, the camera button is mapped to bring up the camera app only on long press of the button, and not normal press. Changing that fixed it for me.

manekineko 06-19-2010 11:44 AM

Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
Quote:

Originally Posted by raiderfan247365 (Post 1824564)
You just gotta install THIS .cab file after flashing, it was posted on the first page :) maybe i should make a reference to it for you newbies!! You can also always set up a sprint connect by going in to start/settings/connections/connections -> "add a new modem connection" -> name connection "Power Vision" and select "Cellular Line" -> enter "#777" as the number -> leave "username", "password", and "domain" fields blank!
I figured i would post the steps as you might need them in your ROM flashing ventures! Good Luck

Oh thanks a lot on that. I had thought I might be missing something like that, but in your first post instructions, it said that "Sprint crap removed" was available as an attachment, so I'd figured all the attachments with Sprint in their name were the Sprint crap. :mrgreen:

raiderfan247365 06-19-2010 12:07 PM

Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
Quote:

Originally Posted by manekineko (Post 1824602)
Oh thanks a lot on that. I had thought I might be missing something like that, but in your first post instructions, it said that "Sprint crap removed" was available as an attachment, so I'd figured all the attachments with Sprint in their name were the Sprint crap. :mrgreen:

you are correct lol SPRINT CRAP has customization .cab left out... Let me know how the ROM treats you

skeegcpp 06-19-2010 04:27 PM

Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
1 Attachment(s)
Quote:

Originally Posted by manekineko (Post 1824598)
I ran into that problem on mine too that the camera button wasn't working, and it turns out that under Settings -> Personal -> Buttons, the camera button is mapped to bring up the camera app only on long press of the button, and not normal press. Changing that fixed it for me.

thx for the fyi, with that being said, i attached the "push side button" cab. it will allow u to assign a program by jus pushing the side button instead of holding it....for example, my push side button assignment launches e-natives...holding it launches the camera

raiderfan247365 06-19-2010 05:21 PM

Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
Quote:

Originally Posted by skeegcpp (Post 1824950)
thx for the fyi, with that being said, i attached the "push side button" cab. it will allow u to assign a program by jus pushing the side button instead of holding it....for example, my push side button assignment launches e-natives...holding it launches the camera

push side button should be in the ROM...

skeegcpp 06-19-2010 09:06 PM

Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
Quote:

Originally Posted by raiderfan247365 (Post 1825008)
push side button should be in the ROM...

lol...it prolly is.
i jus attached cuz the OP gave me the idea

manekineko 06-21-2010 04:59 PM

Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
Quote:

Originally Posted by raiderfan247365 (Post 1824631)
you are correct lol SPRINT CRAP has customization .cab left out... Let me know how the ROM treats you

It's really working well for me so far. I'm using it with SPB Mobile Shell and everything is smooth.

Haven't seen any crashes yet, either, which is surprising for a Windows Mobile device. I assume eventually I'll see a random crash every now and again though, given this is Windows. Is that probably accurate to assume?

raiderfan247365 06-21-2010 06:12 PM

Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
Quote:

Originally Posted by manekineko (Post 1828332)
It's really working well for me so far. I'm using it with SPB Mobile Shell and everything is smooth.

Haven't seen any crashes yet, either, which is surprising for a Windows Mobile device. I assume eventually I'll see a random crash every now and again though, given this is Windows. Is that probably accurate to assume?

glad its goin good for you!
and yes lockups are generally a part of winmo life (especially when using 6.1 native kernels with 6.5 systems) but a good rom should keep them to nothing more than minor annoyance.

raiderfan247365 06-22-2010 06:55 PM

Re: +++RaiderROM! WM 6.5.3 23569 [6/022/2010]
 
updated 128DPI, big update. Gosh I need a job hahaha

frood 06-25-2010 12:03 PM

Re: +++RaiderROM! WM 6.5.3 [6/22/2010]
 
Thanks for all the hard work!

By the way, the latest link (http://www.megaupload.com/?d=SZX0DT23) doesn't work for me... it says "file not found".

darjin77 06-25-2010 01:43 PM

Re: +++RaiderROM! WM 6.5.3 [6/22/2010]
 
Has bluetooth been fixed? Is there a known issues list?
Thanks!

jjudk001 06-25-2010 02:09 PM

Re: +++RaiderROM! WM 6.5.3 [6/22/2010]
 
I installed this a few days ago... just wondering how I can get the ringer to work right? When I have it switched to vibrate phone calls will not vibrate, only text. When I have it set to normal calls and text make noise.

How can I get the vibrate to work correctly? As that is what mode I have it on the most.

raiderfan247365 06-25-2010 02:51 PM

Re: +++RaiderROM! WM 6.5.3 [6/22/2010]
 
Quote:

Originally Posted by frood (Post 1837101)
Thanks for all the hard work!

By the way, the latest link (http://www.megaupload.com/?d=SZX0DT23) doesn't work for me... it says "file not found".

Sorry, there was some stuff in the ROM I wanted to fix so took the link down. Be up today hopefully.

Quote:

Originally Posted by darjin77 (Post 1837339)
Has bluetooth been fixed? Is there a known issues list?
Thanks!

bluetooth is good. known issues? havnt heard any feedback about issues

Quote:

Originally Posted by jjudk001 (Post 1837389)
I installed this a few days ago... just wondering how I can get the ringer to work right? When I have it switched to vibrate phone calls will not vibrate, only text. When I have it set to normal calls and text make noise.

How can I get the vibrate to work correctly? As that is what mode I have it on the most.

have you tried using the RINGER UPDATE? Which ROM are you using?

jjudk001 06-25-2010 04:15 PM

Re: +++RaiderROM! WM 6.5.3 [6/22/2010]
 
I am using the one you released before the 6/22 update. ill try the update.

update: it appears to be working as it should now, thanks.

raiderfan247365 06-25-2010 10:55 PM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
UPDATED 128DPI Version. New Windows Build, super smooth

UPdownLoAD 06-27-2010 09:37 AM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
Quote:

Originally Posted by raiderfan247365 (Post 1838318)
UPDATED 128DPI Version. New Windows Build, super smooth

"Super smooth" was what convinced me to finally throw a custom rom on my Sprint Pro :)

So far, compared to the "stable" Sprint rom, this rocks and is very snappy.

Several questions, may not be related just to this rom though:
1) I have the X button option enabled and it's just not there. I hate using the task manager to close running programs; what am I missing or is this just the way it is?
2) Any icons to show active data usage?
3) And is a clean rom coming of this 6.5.3? There's a lot installed that I'll just never use....

THANKS!!

EDIT: Figured 1 of my questions out and removed it.

I have had a REPEATABLE lockup- When I use File Explorer to browse a random directory on my SD card (4GB), it would lock the device up completely. I found that it had to do with the hidden directories left on my card from 6.1 (WM something and MS something). Once I deleted those, I've had no lockups (and the folders have not reappeared) since.

manekineko 06-27-2010 12:39 PM

Re: +++RaiderROM! WM 6.5.3 [6/22/2010]
 
Quote:

Originally Posted by raiderfan247365 (Post 1837478)
have you tried using the RINGER UPDATE? Which ROM are you using?

What exactly does this ringer update do? Also, it's not already baked into your ROM?

raiderfan247365 06-27-2010 01:36 PM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
Quote:

Originally Posted by UPdownLoAD (Post 1839899)
"Super smooth" was what convinced me to finally throw a custom rom on my Sprint Pro :)

So far, compared to the "stable" Sprint rom, this rocks and is very snappy.

Several questions, may not be related just to this rom though:
1) I have the X button option enabled and it's just not there. I hate using the task manager to close running programs; what am I missing or is this just the way it is?
2) Any icons to show active data usage?
3) And is a clean rom coming of this 6.5.3? There's a lot installed that I'll just never use....

THANKS!!

Thanks a lot, the newest Windows Mobile Builds are really good!
1. Its because i have " remove start and X button" registry tweak enabled it can be found HERE, just set the values back to normal (i dont know what they are sorry, i suck with registry stuff)
2. This is due to Mighty Mike's taskbar that i modified, for whatever reason it shows data as active when its not, so there would be the two arrows at the top bar constantly instead of EV or 1x, so i just replaced the arrows icon with 3g icon. It shows when an initial connection is made though....
3. Clean ROM huh? your the first to ask but i wouldn't be against it i suppose.

Quote:

Originally Posted by manekineko (Post 1840050)
What exactly does this ringer update do? Also, it's not already baked into your ROM?

Ringer update makes sure that the phone rings correctly as it should. If you are using RealVGA and disable the phone canvas however there is a possibility that you lose the ringer. And yes I do cook it in but some programs people install might reset it, ect....

UPdownLoAD 06-28-2010 10:09 AM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
Thanks for the reply. I undid the X button disable and then I did some research on the X button; basically, X is on bottom right instead of top and many programs do not have the ability to change their close location. There's long and lengthy "solutions" or I can just get used to holding OK down to close programs. Sigh. Closing a program down is something where WM has been flawed for years compared to now-competing OSs.

So compared to my 3-4 lockups a day on Sprint's 1.04 stock rom, I'm in heaven. But the pastel colors in messaging and e-mailing me are driving me NUTS; I've tried every theme too so I know I'm just missing something simple. Suggestions?

My profile still says Q9c because that is/was one of the best phones I've ever used and it's still charged and powered up every now-and-then. This is my last resort before switching back....lol.....

raiderfan247365 06-28-2010 12:44 PM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
Quote:

Originally Posted by UPdownLoAD (Post 1841313)

So compared to my 3-4 lockups a day on Sprint's 1.04 stock rom, I'm in heaven. But the pastel colors in messaging and e-mailing me are driving me NUTS; I've tried every theme too so I know I'm just missing something simple. Suggestions?

I am not sure what you mean by pastel colors?
http://i52.photobucket.com/albums/g2...creen001-6.png

UPdownLoAD 06-28-2010 01:33 PM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
Quote:

Originally Posted by raiderfan247365 (Post 1841714)
I am not sure what you mean by pastel colors?
http://i52.photobucket.com/albums/g2...creen001-6.png

When I open an e-mail or txt, it has a black background and blue or white letters.

raiderfan247365 06-28-2010 01:55 PM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
Quote:

Originally Posted by UPdownLoAD (Post 1841839)
When I open an e-mail or txt, it has a black background and blue or white letters.

oh i see, this does not happen when using original blue theme correct? I believe all the themes i put on have the black background unfortunately. Try installing this theme

UPdownLoAD 06-28-2010 02:38 PM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
I installed the above theme and it's as advertised until I open a message. I have a black background at this point with white letters. This needs reversed and I'll be happy :)

topher77s 06-29-2010 03:23 PM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
I'd like to see a clean build of this ROM too. =)

raiderfan247365 06-29-2010 04:29 PM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
Quote:

Originally Posted by UPdownLoAD (Post 1842057)
I installed the above theme and it's as advertised until I open a message. I have a black background at this point with white letters. This needs reversed and I'll be happy :)

i dont really know what to say... when using the original blue theme i get white background in text field and when using mcarroll pure black i get white as well...

UPdownLoAD 06-29-2010 04:54 PM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
If it's just me then, I'll do a hard reset and go from there.

EDIT:

Same right out of the hard reset, it's doing it. And in the process, my charging port is now loose. This will be my 5th Palm Pro (and I used the PPC6700 for 2 years w/o a replacement!!) so my Sprint store said the next time I come in they will exchange my phone for a different model. I'm thinking the Samsung Intrepid?

raiderfan247365 06-29-2010 08:19 PM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
Quote:

Originally Posted by UPdownLoAD (Post 1844285)
If it's just me then, I'll do a hard reset and go from there.

EDIT:

Same right out of the hard reset, it's doing it. And in the process, my charging port is now loose. This will be my 5th Palm Pro (and I used the PPC6700 for 2 years w/o a replacement!!) so my Sprint store said the next time I come in they will exchange my phone for a different model. I'm thinking the Samsung Intrepid?

Could you post a screen shot of your issue?
That sucks, i went through like 5 touch pros, 4 moguls, and only 2 treos lol
I had the intrepid, its cool, the screen res isnt the best though and its kinda buggy. But it has the capability for custom ROMs because there is an official flash tool for it but no one loves the intrepid :(

wmadan 06-29-2010 10:33 PM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
Quote:

Originally Posted by raiderfan247365 (Post 1844205)
i dont really know what to say... when using the original blue theme i get white background in text field and when using mcarroll pure black i get white as well...

Every theme I have tried gives me a black background in my messaging.

Is there any way to fix this? BTW, I am running the 128 DPI version.

Bill

raiderfan247365 06-30-2010 12:01 AM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
Quote:

Originally Posted by wmadan (Post 1844762)
Every theme I have tried gives me a black background in my messaging.

Is there any way to fix this? BTW, I am running the 128 DPI version.

Bill

okay i finally see what u guys are talking about. I dont know why its black...

ltzmu4h 06-30-2010 12:20 AM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
I've also had the black background problem, but what i really want to know, is there a way to text more efficiently? atm to send the text, i have to press the send button on the screen with my finger. Is there a way to change like the calendar button to be the send button? Or is there no fix to this problem, and that i'd have to get used to it? Thanks

Steven

frood 06-30-2010 12:38 PM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
Yeah, I switched to another theme since the default is hard to read when a text is selected.

The latest version ROM is working great! I like the startup screen too, though some of the icons in the program/start menu look kind of cheap; they could have rounded the corners at least! :P

darjin77 06-30-2010 12:54 PM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
How do I get 96 DPI on Build 23662 working? I can't find a RealVGA cab anywhere.

Thanks!

raiderfan247365 06-30-2010 01:50 PM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
Quote:

Originally Posted by frood (Post 1845702)
Yeah, I switched to another theme since the default is hard to read when a text is selected.

The latest version ROM is working great! I like the startup screen too, though some of the icons in the program/start menu look kind of cheap; they could have rounded the corners at least! :P

glad its going good! ya some of the default winmo icons dont look so sharp and some exe's just havnt been updated with better icons :(

Quote:

Originally Posted by darjin77 (Post 1845745)
How do I get 96 DPI on Build 23662 working? I can't find a RealVGA cab anywhere.

here and here
Thanks!


dinowarp 07-01-2010 09:05 AM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
Sorry for the noob question. I have the latest ROM and I am trying to send pictures. I have the Arcsoft MMS cab installed but it is just giving me an error that it can't send. Should I install the Sprint Picture Mail app? Please help. Thanks

raiderfan247365 07-01-2010 12:36 PM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
Quote:

Originally Posted by dinowarp (Post 1847066)
Sorry for the noob question. I have the latest ROM and I am trying to send pictures. I have the Arcsoft MMS cab installed but it is just giving me an error that it can't send. Should I install the Sprint Picture Mail app? Please help. Thanks


I assume you are on Sprint? And you have a working data connection? You must install the "Remove Arcsoft.cab" and then install the "Sprint Arcsoft.cab" both are linked on the first page

b911rice 07-03-2010 01:49 AM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
I have an Alltel treo pro how do I get mms to work.

raiderfan247365 07-03-2010 02:10 AM

Re: +++RaiderROM! WM 6.5.3 [6/25/2010]
 
u try the alltel carrier cab?

flyguy55 07-03-2010 11:03 AM

Cannot install RaiderROM! WM 6.5.3 Error 262
 
Hi I've been attempting to install the Rom on my TP but it keeps hanging up on error 262. I've read the posts and tried the soft reset and unless I missed something I'm perplexed. I don't know if it will help but the Screen 'Verify that you want to update the Rom Version:' never appears the exe skips to 'You are now ready...' screen. Any suggestions would be appreciated. Thks

raiderfan247365 07-03-2010 12:05 PM

Re: Cannot install RaiderROM! WM 6.5.3 Error 262
 
Quote:

Originally Posted by flyguy55 (Post 1850136)
Hi I've been attempting to install the Rom on my TP but it keeps hanging up on error 262. I've read the posts and tried the soft reset and unless I missed something I'm perplexed. I don't know if it will help but the Screen 'Verify that you want to update the Rom Version:' never appears the exe skips to 'You are now ready...' screen. Any suggestions would be appreciated. Thks

you run the UNLOCKER first?


All times are GMT -4. The time now is 08:56 AM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0