PPCGeeks
Page 646 of 842 « First 146546596636644645 646 647648656696746 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   CDMA TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=98)
-   -   [ Kitchen ][ 3-5 ][ v1.6 R3 ][28232 / 23542 / 21893 / 21056] Calkulin's WVGA Kitchen (http://forum.ppcgeeks.com/showthread.php?t=95635)

smiznith 03-19-2010 01:27 PM
Re: [ Kitchen ][ 3-5 ][ v1.6 R3 ][28232 / 23542 / 21893 / 21056] Calkulin's WVGA Kitc
 
Quote:
Originally Posted by TMartin (Post 1641991)
XIP isn't too bad but OEMDrivers can be rough lol.
i agree.. the OEMDrivers has already been dumped though... check a few pages back and your golden

LinearBurn 03-19-2010 01:29 PM
Re: [ Kitchen ][ 3-5 ][ v1.6 R3 ][28232 / 23542 / 21893 / 21056] Calkulin's WVGA Kitc
 
and is there a check or somthing on the oem files like if i update them will it cause the build to fail?

PS sorry for sounding stupid Iv learned a lot over the last month but thats the extent of cooking .... sigh time to reextract the kitchen and start over

zone23 03-19-2010 01:32 PM
Re: [ Kitchen ][ 3-5 ][ v1.6 R3 ][28232 / 23542 / 21893 / 21056] Calkulin's WVGA Kitc
 
Quote:
Originally Posted by Calkulin (Post 1641981)
Manila is easy, the fun part is in the XIP & OEMDrivers

Man if I could just figure out Manila one time I would be set. I found the engine its the other files I can't figure out. I suk.. ](*,)

Indagroove explained how easy it was once but I still didn't get it.

zone23 03-19-2010 01:35 PM
Re: [ Kitchen ][ 3-5 ][ v1.6 R3 ][28232 / 23542 / 21893 / 21056] Calkulin's WVGA Kitc
 
Quote:
Originally Posted by smiznith (Post 1642291)
i agree.. the OEMDrivers has already been dumped though... check a few pages back and your golden
Ya i've been cooking with them and seem to work fine so far.

zone23 03-19-2010 01:37 PM
Re: [ Kitchen ][ 3-5 ][ v1.6 R3 ][28232 / 23542 / 21893 / 21056] Calkulin's WVGA Kitc
 
I know NRGz going to be the first to pump out this new ROM I bet he will have it done tonight. I might have to try out his ROM, I'll just bring my battery charger with me :)

LinearBurn 03-19-2010 01:56 PM
Re: [ Kitchen ][ 3-5 ][ v1.6 R3 ][28232 / 23542 / 21893 / 21056] Calkulin's WVGA Kitc
 
BTW thanks guys for thoes that helped me earlyer

smiznith 03-19-2010 02:09 PM
Re: [ Kitchen ][ 3-5 ][ v1.6 R3 ][28232 / 23542 / 21893 / 21056] Calkulin's WVGA Kitc
 
Quote:
Originally Posted by zone23 (Post 1642312)
Man if I could just figure out Manila one time I would be set. I found the engine its the other files I can't figure out. I suk.. ](*,)

Indagroove explained how easy it was once but I still didn't get it.
yeah its quite easy... i actually sorted out mine exactly the way calk does it... here is what you do:

1. delete all the dsm files..
2. take the manila files and put them in a folder
3. take the other files left over and put them in the manila engine folder you create
4. take the initflashfiles.dat file in the oem_lang_0409 folder and got to the bottom.
5. create a notepad file and call it app.dat, and copy the manila content at the bottom that refers to the manila files your porting over into that notpad.
6. save
7. flash away!

now that may have been more confusing, but thats how i figured it out and man it was EASY! also search indagrooves post about 1 month ago referring to the asia TP2 2.5 rom dump.. he walked us through it then also...

http://forum.ppcgeeks.com/showthread...95635&page=379

this page going forward and backwards has lots of information on sorting the dump manila files.... enjoy!

Formula84 03-19-2010 02:10 PM
Re: [ Kitchen ][ 3-5 ][ v1.6 R3 ][28232 / 23542 / 21893 / 21056] Calkulin's WVGA Kitc
 
Quote:
Originally Posted by TMartin (Post 1641991)
XIP isn't too bad but OEMDrivers can be rough lol.
Anyone have the new XIP ready for the kitchen...? I got the OEMDrivers that Mikee posted and was going to load it up and see how it runs, but if it is worth it I will wait and get the updated XIP. Not sure if it matters that I use 6.5.x and this is a 6.5 build are the XIP's different?

Adrianh85 03-19-2010 02:13 PM
Re: [ Kitchen ][ 3-5 ][ v1.6 R3 ][28232 / 23542 / 21893 / 21056] Calkulin's WVGA Kitc
 
Quote:
Originally Posted by smiznith (Post 1642443)
yeah its quite easy... i actually sorted out mine exactly the way calk does it... here is what you do:

1. delete all the dsm files..
2. take the manila files and put them in a folder
3. take the other files left over and put them in the manila engine folder you create
4. take the initflashfiles.dat file in the oem_lang_0409 folder and got to the bottom.
5. create a notepad file and call it app.dat, and copy the manila content at the bottom that refers to the manila files your porting over into that notpad.
6. save
7. flash away!

now that may have been more confusing, but thats how i figured it out and man it was EASY! also search indagrooves post about 1 month ago referring to the asia TP2 2.5 rom dump.. he walked us through it then also...

http://forum.ppcgeeks.com/showthread...95635&page=379

this page going forward and backwards has lots of information on sorting the dump manila files.... enjoy!
thanks u have just been upgraded to one of my fav posts!! great research and memory!! damn i love this site!!

amw1972 03-19-2010 02:14 PM
Re: [ Kitchen ][ 3-5 ][ v1.6 R3 ][28232 / 23542 / 21893 / 21056] Calkulin's WVGA Kitc
 
Quote:
Originally Posted by Calkulin (Post 1641940)
It will be a while as I just dumped the ROM and haven't even updated the kitchen in a while since I haven't been using Windows lately. So don't expect anything that soon(weekend), so probably sometime this next week at best, depending if new Leo, etc ROMs are released
please don't say you've been "Mac'ing"


All times are GMT -4. The time now is 10:22 PM.
Page 646 of 842 « First 146546596636644645 646 647648656696746 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0