PPCGeeks - [HOW-TO] - - Flash a Rom or Radio and re-locking on your TP2 from the SD card

Page 6 of 29

Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- CDMA TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=98)

- - [HOW-TO] - - Flash a Rom or Radio and re-locking on your TP2 from the SD card (http://forum.ppcgeeks.com/showthread.php?t=95375)

cornelious2

12-28-2009 07:14 PM

Re: HOW TO: flash a Rom or Radio on your TP2 from the SD card

Quote:

Originally Posted by birddseedd (Post 1442175)

where do i find the original sprint rom so i can flash it back for warranty work?

can you UNhardspl it so they cannot detect that?

http://forum.ppcgeeks.com/showthread.php?t=93252 post 2

as far as the stock rom its in the same sticky you found this thread at. the one labeled stock. as far as sim unlocked i think thats permanent. you can check out cmonex's site for that since this is a bit beyond the scope of this thread.

dominicanodcora

01-02-2010 12:12 AM

Re: HOW TO: flash a Rom or Radio on your TP2 from the SD card

Quote:

Originally Posted by cornelious2 (Post 1330166)

yes, even more, you can store different roms and flash between them at will and they flash faster via the sd card so you can test a rom and flash back to your favorite one back and forth.

how can u have more than one rom in the root of sd if i may ask? do u rename each one of them for example RHODIMH.nbh, RHODIMH1.nbh, RHODIMH2.nbh, etc..

dominicanodcora

01-02-2010 12:13 AM

Re: HOW TO: flash a Rom or Radio on your TP2 from the SD card

i want to try to flash the mighty latest rom but it says i need runcc??

cornelious2

01-02-2010 07:35 PM

Re: HOW TO: flash a Rom or Radio on your TP2 from the SD card

Quote:

Originally Posted by dominicanodcora (Post 1454612)

how can u have more than one rom in the root of sd if i may ask? do u rename each one of them for example RHODIMH.nbh, RHODIMH1.nbh, RHODIMH2.nbh, etc..

yes, but I rename them something more meaningfull like stock.nbh, mightylove.nbh mightywar.nbh, nrg.nbh etc. and if I am using alot at one given time I put them in folders.

cornelious2

01-02-2010 07:37 PM

Re: HOW TO: flash a Rom or Radio on your TP2 from the SD card

Quote:

Originally Posted by dominicanodcora (Post 1454618)

i want to try to flash the mighty latest rom but it says i need runcc??

can you pm me with a more specific error message and what you did to get there? every detail no matter how mundane could matter.

jawe347

01-06-2010 08:32 PM

Re: HOW TO: flash a Rom or Radio on your TP2 from the SD card

1 Attachment(s)

I flashed from my SD card but the phone is stuck in this screen:

Help?!?

skeegcpp

01-06-2010 08:49 PM

Re: HOW TO: flash a Rom or Radio on your TP2 from the SD card

Quote:

Originally Posted by jawe347 (Post 1466050)

I flashed from my SD card but the phone is stuck in this screen: Help?!?

thats fine..just soft reset. ur good to go

jawe347

01-06-2010 09:15 PM

Re: HOW TO: flash a Rom or Radio on your TP2 from the SD card

Did the soft reset but the phone gets stuck at the Touch Pro 2 screen. Is that supposed to happen or am I s.o.l?

fishingmedic

01-07-2010 10:54 AM

Re: HOW TO: flash a Rom or Radio on your TP2 from the SD card

I just formatted a SD card to FAT32 but when I open say Malatesta's ROM, there are a bunch of other files, ie. pagepool changer, etc in addition to the RUU_signed.nbh file. Are those not needed for the ROM when flashing from SD card?

fishingmedic

01-07-2010 10:59 AM

Re: HOW TO: flash a Rom or Radio on your TP2 from the SD card

Quote:

Originally Posted by jawe347 (Post 1466050)

I flashed from my SD card but the phone is stuck in this screen:

Help?!?

Dude... you did it backwards.... (sorry, had to say it...). any luck getting it working again, just curious as I'm about to undertake flashing this way. If you did, how did you get it off that screen, HR, SR, etc?

All times are GMT -4. The time now is 01:04 PM.

Page 6 of 29

« First

Last »

Show 40 post(s) from this thread on one page

Content Relevant URLs by vBSEO 3.6.0