PPCGeeks
Page 45 of 233 « First 354344 45 46475595145 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   CDMA TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=98)
-   -   [HSPL-UNLOCKER] - - Rhodium W HardSPL (http://forum.ppcgeeks.com/showthread.php?t=93252)

aguenter322 11-02-2009 12:10 AM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
I'm trying to flash SPL on my gf's TP2 using V1_10R3, and it disconnects from WMDC and seems to turn the device off once she clicks the Flash Hard-SPL (automatic mode) button on the first screen. Device then has to be soft reset. Same is happening for me on my already V1_10R2 flashed TP2 when I try this R3.

She's on Vista, I'm on Win7. Both of us are WMDC 6.1. I flashed my device a few days ago with V1_10R2 and had no problem...I read the first post connection problems section and didn't see anything that sounded like what was happening here either...

I tried continuing with mine even though my phone was no longer connected via ActiveSync and seemed to be off/crashed, and the screen showing the two images showed nothing for the installed SPL image so I didn't dare click the Update button and continue.

TIA for any help!

razorloves 11-02-2009 12:13 AM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
Quote:
Originally Posted by aguenter322 (Post 1288724)
I'm trying to flash SPL on my gf's TP2 using V1_10R3, and it disconnects from WMDC and seems to turn the device off once she clicks the Flash Hard-SPL (automatic mode) button on the first screen. Device then has to be soft reset. Same is happening for me on my already V1_10R2 flashed TP2 when I try this R3.

She's on Vista, I'm on Win7. Both of us are WMDC 6.1. I flashed my device a few days ago with V1_10R2 and had no problem...I read the first post connection problems section and didn't see anything that sounded like what was happening here either...

I tried continuing with mine even though my phone was no longer connected via ActiveSync and seemed to be off/crashed, and the screen showing the two images showed nothing for the installed SPL image so I didn't dare click the Update button and continue.

TIA for any help!
what you are describing is what it's suppose to do. just follow along with the on screen prompts

bigchico67 11-02-2009 12:21 AM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
Quote:
Originally Posted by aguenter322 (Post 1288724)
I'm trying to flash SPL on my gf's TP2 using V1_10R3, and it disconnects from WMDC and seems to turn the device off once she clicks the Flash Hard-SPL (automatic mode) button on the first screen. Device then has to be soft reset. Same is happening for me on my already V1_10R2 flashed TP2 when I try this R3.

She's on Vista, I'm on Win7. Both of us are WMDC 6.1. I flashed my device a few days ago with V1_10R2 and had no problem...I read the first post connection problems section and didn't see anything that sounded like what was happening here either...

I tried continuing with mine even though my phone was no longer connected via ActiveSync and seemed to be off/crashed, and the screen showing the two images showed nothing for the installed SPL image so I didn't dare click the Update button and continue.

TIA for any help!
Mine did the same thing. Here is what you have to do. After you click automatic flash the ruu pops up but your phone will turn off. unplug the phone turn it back on when it comes back on full plug it back in to establish an active sync connection when connected then continue with the ruu. That will take care of it.

mjodotcom 11-02-2009 12:22 AM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
Thanks a lot for the unlocker Elite Team, its nice to finally get flashing again =). Maybe this is my ignorance talking, but I am curious. Now that the phone is unlocked, can you still only use CDMA specific ROMS or is any ROM fair game?

neilson 11-02-2009 12:32 AM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
Error 246, it's still being investigated right? Because I have great internet signal(even pulled the ethernet cable directly into the computer at 1 point, and still Error 246).

razorloves 11-02-2009 12:41 AM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
Quote:
Originally Posted by neilson (Post 1288799)
Error 246, it's still being investigated right? Because I have great internet signal(even pulled the ethernet cable directly into the computer at 1 point, and still Error 246).
what error are you getting when you choose automatic

neilson 11-02-2009 12:42 AM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
Quote:
Originally Posted by razorloves (Post 1288834)
what error are you getting when you choose automatic
Automatic: I've already run the unlocker before.

Manual: Error 246.

razorloves 11-02-2009 12:48 AM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
Quote:
Originally Posted by neilson (Post 1288840)
Automatic: I've already run the unlocker before.

Manual: Error 246.
have you thoroughly read through the first 2 post of this thread and tried all the troubleshooting mentioned in post #2? Also, is this the only device that you're trying to unlock?

neilson 11-02-2009 01:00 AM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
Quote:
Originally Posted by razorloves (Post 1288858)
have you thoroughly read through the first 2 post of this thread and tried all the troubleshooting mentioned in post #2? Also, is this the only device that you're trying to unlock?
Yes and Yes, to both.

razorloves 11-02-2009 01:05 AM
Re: RhodiumW CDMA Worldphone HardSPL Unlocker Release
 
Quote:
Originally Posted by neilson (Post 1288898)
Yes and Yes, to both.
if the unlocker tells you that you've already unlocked a device, then the only way i know of to get past that is to contact cmonex or to use the donatation link in unlocker in automatic mode.


All times are GMT -4. The time now is 10:57 PM.
Page 45 of 233 « First 354344 45 46475595145 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0