|ROM|¯`·.¸¸.- Energy -.¸¸.·´¯ * |July 4| 21916|29022 * Sense 2021 + flavors

[Papadopoulos]

Hey guys,

I tried to install this ROM(21911) after installing the Hard-SPL upgrade this morning and now the only thing I get is a black screen with TOUCH pro2 right in the middle of it

I Have a Rhodium rdh400 CDMA and I used to appropriate Hard-SPL and the ROM from this thread so I don't know what I did wrong...Was I supposed to have Sense already installed or something ?!?

Is there a way for me to use my phone again soon ?!?

A BIG thank you to nay of you to help me with this !!!!!

JL

[shaolinsoldier79]

Wirelessly posted (Opera/9.7 (WindowsMobile; PPC; Opera Mobi/35267; U; en; Presto/2.1.1))

got first "not enough storage" error when trying to open opera, since i installed latest 23xxx rom.. not bad, it used to happen pretty frequently...

[bteljuice]

Originally Posted by Papadopoulos

Hey guys,

I tried to install this ROM(21911) after installing the Hard-SPL upgrade this morning and now the only thing I get is a black screen with TOUCH pro2 right in the middle of it

I Have a Rhodium rdh400 CDMA and I used to appropriate Hard-SPL and the ROM from this thread so I don't know what I did wrong...Was I supposed to have Sense already installed or something ?!?

Is there a way for me to use my phone again soon ?!?

A BIG thank you to nay of you to help me with this !!!!!

JL

After it displays TOUCH PRO 2, did you wait around 3-4min.

Under the Touch pro 2, do you have stuff written in RED at the bottom.
Last row should say ENERGY.

[t-bob]

I am having a minor issue I hope someone can help me with. I am running the July 16 cookie 21911. I like to set the backlight to dim automatically after 1 minute when on battery power (start->settings->system->power->backlight->dim backlight if device is not used for: ). However, the setting has been reverting on its own to 10 seconds. I change it to 1 minute and it changes back to 10 seconds repeatedly. Not sure what I am missing or doing wrong, but if anyone has a fix for this issue I would greatly appreciate the help. Thanks

[btstarcher]

Originally Posted by Papadopoulos

Hey guys,

I tried to install this ROM(21911) after installing the Hard-SPL upgrade this morning and now the only thing I get is a black screen with TOUCH pro2 right in the middle of it

I Have a Rhodium rdh400 CDMA and I used to appropriate Hard-SPL and the ROM from this thread so I don't know what I did wrong...Was I supposed to have Sense already installed or something ?!?

Is there a way for me to use my phone again soon ?!?

A BIG thank you to nay of you to help me with this !!!!!

JL

Enter bootloader mode by turning it off and holding in volume down and power (end call) buttons, and see if the HardSPL was flashed correctly. If it was then either try to re-flash, flash a stock ROM and then re-flash, or use Task29 and re-flash.

[Papadopoulos]

I waited for almost 15 minutes and nothing happens...

For my bottom screen, there is nothing displayed in red as it was before my ROM installation. Im gonna try the bootloader but I don't know anything about the task29 yet

Will get back to you guys this afternoon.

Thank you

[Papadopoulos]

In the bootloader I see the SPL-1.00.Olinex and it seems fine. If I want to flash to stock again, where can I find the exe for this ?!? And what is the task29 ?

Thank you again

[Papadopoulos]

Originally Posted by ralanleder

i had the same problem with the backlight reverting back to ten seconds after i changed it to one minute while running the 23569 gtx rom, but i found if i changed the setting to not dim at all while on battery power it would stay like that

But on my side I can't even load the shell...I get nothing more than the loading screen !!

edit: nvm...MT

[btstarcher]

The stock ROM's are stickied at the top of this forum.

[Papadopoulos]

It works ....my bad. I had the right ROM but coudn't get it installed without the activesync activated.

I went into the bootloader and then was able to get my stock ROM back in.

Going to try to MaxSense again very soon...think its probably because im runnin on WM6.1 maybe ?!?

Thx again