Originally Posted by doloop (Post 5845908)

Hi,

I hex edited RomUpdateUtility.exe so it runs task 29 right after flashing ruu_signed.nbh

As every one understand this command format the rom,

Just unzip and run task29.exe . You may replace ruu_signed.nbh with the radio of your choice.

After the phone reset itself, your old rom will be gone, so it won't boot: binfs has been formated, your phone memory is clean.
You'll need to power up in bootloader mode (press vol down right after power key), then use the leocustomruu.exe provided with your favorite rom package, or flash it from memory card using standard procedure.

Originally Posted by Hypnotic2010 (Post 1674479)

To try to keep the forums a little cleaner, we are asking that you ONLY start threads in the Upgrade forums that are to release a ROM, Kitchen, or Radio.

If you have a question about a specific ROM/Radio/Kitchen, then please post it in the appropriate thread.

ALL other threads should be the the device's forum (for example, those related to hardware, GPS, bluetooth, etc).

If you have a reg edit or tweak...if it applies to multiple devices, then please post it in the 'PPC Registry Tweaks' forum and list which devices its compatible with. If it is device specific, then post it in the device forum, NOT the Upgrades forums.

If you're not sure where to post something, then post it in the device's forum and a staff member can always move it.
__________________

Originally Posted by agent_47 (Post 1673997)

i thought of re doing doloop's modd for CDMA TP2 :)
and here it is :) fully tested to be working :)
confirmation thnx to ziggy471: http://forum.xda-developers.com/show...6&postcount=97
now we can mtty our TP2 without having the need of MTTY and its drivers :)

INSTRUCTIONS:
- download and unzip
- put you favorite RADIO in the mix
- run then task29.exe and wait for it to finish.....
- device will reboot but will neva go past the bootscreen coz there is no OS to boot :eek:
- take our batti and then flash a rom using mSD card or by taking device into bootloader and using customRUU to load ur favorite ROM :)

DOWNLOAD:
task29


CREDIT:
all credit goes to doloop for coming up with the idea :)


http://forum.xda-developers.com/show...08&postcount=1

Originally Posted by MordyT (Post 1674652)

I disagree this time. This is solely used for ROM flashing.
Thanks Agent_47

Originally Posted by ffkip911 (Post 1675023)

is this confirmed cdma? this is the filename...sounds GSM to me
Radio 2.08.50.05 + task29.zip

Originally Posted by Nygel (Post 1675290)

this has probadly been ask but what RADIO'S technically you can use to flash with this?

Originally Posted by agent_47 (Post 1673997)

i thought of re doing doloop's modd for CDMA TP2 :)
and here it is :) fully tested to be working :)
confirmation thnx to ziggy471: http://forum.xda-developers.com/show...6&postcount=97
now we can mtty our TP2 without having the need of MTTY and its drivers :)

INSTRUCTIONS:
- download and unzip
- put you favorite RADIO in the mix
- run then task29.exe and wait for it to finish.....
- device will reboot but will neva go past the bootscreen coz there is no OS to boot :eek:
- take our batti and then flash a rom using mSD card or by taking device into bootloader and using customRUU to load ur favorite ROM :)

DOWNLOAD:
task29


CREDIT:
all credit goes to doloop for coming up with the idea :)


http://forum.xda-developers.com/show...08&postcount=1

Originally Posted by swlaraut (Post 1679159)

Sorry if this is a noob Q, but... I have never flashed the radio on my TP2 because I am happy with stock one. If I use task 29 does it wipe the radio too? Will I have to find and flash the radio or go back to my stock USCC rom, which includes the radio, before flashing a custom rom? Thanks

Originally Posted by tpeazy (Post 1679507)

P.S. Don't you have to be radio unlocked to flash a radio on the TP2? Especially a Sprint TP2? Or am I just waaaaaaaaaaaaaaaaaay off?

Originally Posted by swlaraut (Post 1679647)

Thats one of the reasons I asked. I have never radio unlocked my phone, but do I need to to use this tool? Sorry for having more questions, and no answers. :(

Originally Posted by Mayonesa (Post 1679660)

if your phone is unlocked to flash roms you can flash any radio found in the sticky here but one of the sprint, it says which one...


you have to be security unlocked for that one...

but the others are good to go

Originally Posted by Mayonesa

no you can use the same one you have if you want.

Originally Posted by Mayonesa (Post 1679787)

you have to add the radio to the task29 folder. the RUU_signed.nbh for the radio



add it then use the task29.exe

Originally Posted by ProDriver77 (Post 1679946)

Wirelessly posted (HTC Touch Pro2 (Sprint): Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 8.12; MSIEMobile6.0) Sprint T7380)

Since I'm running the stock Sprint radio, do I need to run Sprint Radio Unlocker prior to running this tool with the radio dropped in?

Originally Posted by MordyT

No. Run the one in post 9, no need to flash a radio. Must be HSPL unlocked.

Originally Posted by mikedboyd (Post 1679975)

Could someone please provide a simplistic explanation of what this is fixing and what it really does to accomplish the fix? I sense that somehow when flashing, either with a too-large or 'bad' ROM, that we have hosed the phone in some way and this procedure fixes the issue. I've been through several threads talking about this, but none of them have a good simple explanation of what the issue and fix are really about.

I'd really love to read the actual poop on what this is.

thanks

Originally Posted by andrewkariana (Post 1680485)

Can Task 29 be flashed from a storage card like a ROM?

Originally Posted by agent_47 (Post 1673997)

i thought of re doing doloop's modd for CDMA TP2 :)
and here it is :) fully tested to be working :)

Originally Posted by MordyT (Post 1679986)

I'm writing one up here...
http://forum.ppcgeeks.com/showthread.php?p=1679967

Originally Posted by ziggy471 (Post 1675296)

Any of the radios, or a splash screen.
If you'd prefer, here's one with a splash screen all build in, just run it and go through the RUU like normal.
Click Here to Download
Z

Originally Posted by tpeazy (Post 1679507)

I really think this is a good question. Maybe the op can make this a little more clear for some of us. Some may not want to flash a radio and so I have attached the exe that I found on the link that doesn't need a radio nbh. This is not from ME...I have simply attached. All the cred goes to doloop and Shadrac for his help.Here is the link http://forum.xda-developers.com/show...3&postcount=19

Originally Posted by Maxx134 (Post 1686997)

Not sure why this file is so much larger, and the RUU exe says Leo for device, but anyway we already have this idea done post 9.

Originally Posted by 1999TL (Post 1692861)

Can somebody make a task29.exe that flashes a blank nbh? I tried the one in the hd2 forum by doloop but it's not compatible with out phone.

Originally Posted by nrfitchett4 (Post 1692865)

i used the one on page9 and win7 gave me an error, but my phone got stuck on the black "Touch pro2" screen so i think it worked.
someone correct me if i'm wrong.

I've had win7 give me that error before when having to install programs through my computer to my phone and the programs always work.