Re: [TOOL] Task 29 (format internal Memory) without drivers, witout mtty
 

I think I accidently messed this up..

I ran task29 without a .nbh file in it, and now whenever I goto the bootloader screen I cannot get a connection to my computer. Am I missing something here? or what?

Re: [TOOL] Task 29 (format internal Memory) without drivers, witout mtty
 

activesync does not work with phone in bootloader mode. so, dont worry about that. Just connect the usb cable and then you should see it say USB on the bottom of the phone screen. then flash whatever you want.

Re: [TOOL] Task 29 (format internal Memory) without drivers, witout mtty
 

Thats the problem I cannot get it to get the active sync connection.
Thanks for the fast reply

Re: [TOOL] Task 29 (format internal Memory) without drivers, witout mtty
 

When do I plug the usb in?
If im not being clear I am getting stuck at the touch pro 2 splash screen? I think its called.

Re: [TOOL] Task 29 (format internal Memory) without drivers, witout mtty
 

Ok sorry guys I was mis-read the instruction and was pressing down+send+end instead of down+end.

Re: [TOOL] Task 29 (format internal Memory) without drivers, witout mtty
 

wow...lol. glad you got it. i didn't understand what you were talkin about. plus, i think you misread my post above. i told you not to worry about activesync connection because it doesn't work in bootloader mode.

Re: [TOOL] Task 29 (format internal Memory) without drivers, witout mtty
 

Thanked again however need further clarification

From SD card:

Ok so to flash from my sdcard I unzip the rom and change the nbh file to rhodimg.nbh then restart and enter boot loader.

So how do I run Task29.

Are you telling me to remove the nbh file and press vol down plus shutoff button and it will run Task 29.

From Active Sync:

Unzip rom then remove nbh file and lnsert Task29.exe Run Rom Upate utility and it will flash Task29.exe is that correct

Im sorry im just a little confused. :dontknow: Please clarify.

Thanks

Re: [TOOL] Task 29 (format internal Memory) without drivers, witout mtty
 

@modmyppc
this is how you use the task29 from post #9.
download the task29 exe to your desktop.
establish activesync connection with phone.
then open the exe.

thats it. same as you do to flash roms.

Re: [TOOL] Task 29 (format internal Memory) without drivers, witout mtty
 

Ok guys, I think task29 killed my phone (TP2 Verizon)I was trying it for the first time and followed the instructions. I put the latest vzw radio on my phone and after task29, flashed a rom that I wanted (MaxSense Timberwolf).
Ok everything was honky dory until i tried to make a call. I got Network authentication failed errors when trying to access the net for data, and everytime I tried to make a call, even if it was to a known working number, I would get the operator message "the number you dialed is not a working number....."

Even after flashing back to the stock rom i still had the same trouble. So I called verizon and they said i needed to reprogram my phone manually. I was able to get thephone working again, but we couldn't get data back on. So they had to send me a new phone.

Long and short- My phone was fine until i used task29. I'm thinking i did something wrong, but i followed the instuctions as stated (I've flashed a million times before with no trouble). I like the idea of task29, but won't use it if it bricks my phone. Any idea what went wrong? or better yet, anyone know how to get this fixed? I still want to use the data on my phone if possible before the new one arrives :)

Re: [TOOL] Task 29 (format internal Memory) without drivers, witout mtty
 

did you do a *228 option 1?