PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   CDMA TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=98)
-   -   [ROM] Plutonium,Neodium,Titanium [21916,28244] (http://forum.ppcgeeks.com/showthread.php?t=106231)

itster 01-28-2010 12:53 PM

Re: 01/27/10 SPRINT NEODIUM_V2 (SYS 21889 Sense UI 25)
 
Quote:

Originally Posted by sacr3d (Post 1522995)
Whats the difference between V2 and V1? and when i dled V2 its an nbh file...whats up with that?

that file is for sd card installation.

follow the link on first page on how to install from sd card. as per vin, it is recommended to install this version via sd card

itster 01-28-2010 12:55 PM

Re: 01/27/10 SPRINT NEODIUM_V2 (SYS 21889 Sense UI 25)
 
Quote:

Originally Posted by jr5416 (Post 1523005)
Yes hotmail bro , i know its hard to believe bc ive never had this problem either, i was on MM newest rom had the sam problem flashed to stock and then flashed to V1 and same problem? Do u think it could be my phone?

The message i get is :

The file WlMLauncher cannot be opened. Either it is not signed with a trusted certificate, or one of its componets cannot be found.

i believe someone mentioned you have to install the live stuff and bing from MS and you wont get that error.

Do a search, im sure that's how the issue is resolved

edit: http://forum.ppcgeeks.com/showthread...ve#post1511803 post #60 by darren

darren.wlsn1 01-28-2010 01:07 PM

Re: 01/27/10 SPRINT NEODIUM_V2 (SYS 21889 Sense UI 25)
 
thats why i asked, i posted the cab allready, but here.

jr5416 01-28-2010 01:08 PM

Re: 01/27/10 SPRINT NEODIUM_V2 (SYS 21889 Sense UI 25)
 
Quote:

Originally Posted by itster (Post 1523030)
i believe someone mentioned you have to install the live stuff and bing from MS and you wont get that error.

Do a search, im sure that's how the issue is resolved

edit: http://forum.ppcgeeks.com/showthread...ve#post1511803 post #60 by darren

Where so i search

reigndropz 01-28-2010 01:09 PM

Re: 01/27/10 SPRINT NEODIUM_V2 (SYS 21889 Sense UI 25)
 
Quote:

Originally Posted by itster (Post 1523026)
that file is for sd card installation.

follow the link on first page on how to install from sd card. as per vin, it is recommended to install this version via sd card


Recommended but not necessary. If you have the V1 rom, just rename the RHODMIMAGE.nbh to RUU_signed.nbh and run the utility. That will work also.

jr5416 01-28-2010 01:10 PM

Re: 01/27/10 SPRINT NEODIUM_V2 (SYS 21889 Sense UI 25)
 
Willl try thanks

darren.wlsn1 01-28-2010 01:11 PM

Re: 01/27/10 SPRINT NEODIUM_V2 (SYS 21889 Sense UI 25)
 
Quote:

Originally Posted by jr5416 (Post 1523069)
Where so i search

wth bro, he linked ya to my post with the cab(in this thread) and i posted the cab, want me to load it too? lol read people read

darren.wlsn1 01-28-2010 01:14 PM

Re: 01/27/10 SPRINT NEODIUM_V2 (SYS 21889 Sense UI 25)
 
vin, i didnt look but can you or whoever make a "usefull cabs" post on page 1 ? very helpfull.

itster 01-28-2010 01:22 PM

Re: 01/27/10 SPRINT NEODIUM_V2 (SYS 21889 Sense UI 25)
 
Quote:

Originally Posted by reigndropz (Post 1523072)
Recommended but not necessary. If you have the V1 rom, just rename the RHODMIMAGE.nbh to RUU_signed.nbh and run the utility. That will work also.


I know, but i was pointing out as to why the file was named as such.

zimmy6996 01-28-2010 01:39 PM

Change "reply all" to "reply" in messaging
 
1 Attachment(s)
(ANOTHER ONE THAT I TAKE NO CREDIT FOR OTHER THAN PULLING TOGETHER THE INFO IN THIS THREAD. THANKS GO OUT TO THE COMMUNITY FOR MAKING THESE CABS!)

Another annoyance is the fact that when you are in Outlook Messaging, and viewing a message, you'll notice the default left softkey is "REPLY ALL" which is just stupid! It should be "REPLY".

Here is another CAB fix ... Another one that Vin may consider slipping in to V3.

1) Copy CAB to storage card.

2) Run CAB to install.

3) Soft reset your device.


Once rebooted, you'll notice you have the nice REPLY soft key there now ... Now you can stop annoying all the people in the joke forward e-mails you get, so you can respond to just your buddy! :)


:laughing3:


-Zimmy6996


All times are GMT -4. The time now is 12:30 PM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0