Originally Posted by saiyanz (Post 1058923)

There is only one question I had before I go ahead and attempt the unlock and flash. Should we hard-reset the phone before carrying out the unlock and flash? I've had my sprint tp for almost 6 months and there have been plenty of tweaks I have performed (thnx to ppc forums) so I was curious if that would effect the process.

Originally Posted by saiyanz (Post 1060076)

Thanks for the reply! Just attempted my first ever flash with Mighty Rom 6 worked great and I am enjoying the rom. This was a great guide. One last final question if in the future a new flash is attempted (with a different rom) do we have to unlock again? Thanks again for the help and great guide.

Originally Posted by Boaz65 (Post 1068385)

When I decide to flash another ROM, where do I find the "custom RUU" thats discussed in the video to upload the new ROM? The video mentions opening the mobile device center but it doesn't say where to find that utility....I was considering switching from MightyRom 4.6 (?) to the Silence/Mighty ROM

Originally Posted by Boaz65 (Post 1068518)

The silence/mighty source I found had it as a rar, is it easier to use the exe? I didn't see it in that format...

Originally Posted by spencer8fire (Post 1080929)

I'm trying to flash Mighty ROM 4 for TP. I've downloaded the rom and extracted the files. My question is, how do I get the bootloader to start? I don't see a Nbh file to put in my RUU folder and I found a bootlauncher exe file to start the bootloader by itself, but it gives me an error when I select it. I have XP so I'm using activesync. Thanks

Originally Posted by bennett279 (Post 1071001)

Noob here....first post. I just had to switch out my Alltel version for a Verizon version and the Touch Flo of the new phone is horrible. I have downloaded a custom ROM, placed it on my phone, opened the .cab file, and installed it. Phone restarts and my theme is changed. Is this the correct way to do it? I didn't install the comex unlocker and use it like the video showed. Please excuse my ignorance.

TIA

Originally Posted by razorloves (Post 1081141)

MightyRom 4 comes with it's own ruu, so you don't need to move any files. Just establish activesync with computer and run the custum_ruu.exe and the flashing process will begin.

Originally Posted by spencer8fire (Post 1081167)

I don't know where the custom ruu.exe is? Is it in one of the files from the download? I downloaded the mighty4 rar file to my desktop, right clicked on it and it says open with (winzip or winrar) I opened with winrar. Never mind. I just figured it out. I downloaded the OEM version. I don't know what that is but I couldn't do anything with it. Thanks as always razorloves, you're a huge help.

Originally Posted by nvirginiaboi (Post 1085347)

Hey where do i go to see the videos so i can flash my verizon diamond? I dont see them anywhere

Originally Posted by nvirginiaboi (Post 1085390)

i ran the might Rom app and when it started to go through the process where it shows the progress bar screen my phone reboots and this error message came up on the ruu screen. ERROR 244 invaled model ID? then it says the update utility cannot be used for your pda please check update utility. help?

Originally Posted by trayson (Post 1089598)

My touch pro is now stuck on the "please wait, phone starting up" screen.

I first did the Hard SPL, and it appeared to be successful (it reads with the right 0.35.CMONEX in the bootlogger)

Then I Did the "electonicrice" kitchen pack 1.1
I used Build pack 23016.

I was able to go through all the steps (selecting options in kitchen, pressing play to build the rom, the phone went into bootlogger mode and it had a status bar that showed it was loading the new rom image on the phone. Afterwards, the utility said it was successful and the phone rebooted itself; and that's where I am stuck.

If I soft reset the phone, it hangs on the verizon splash screen.

I've tried to hard reset, but it doesn't seem to be willing to do it. I can get the phone back into bootlogger mode, and can reinstall a rom from the kitchen, but that gets me right back to being stuck at the splash screen...

On the splash screen it says the following:

uP06 P DCBBPZM-615010
B 02 R 1.03. 03V
ps20 D 1.03


So, if anyone can help me out, I'd love it. I have a brand new Verizon Touch Pro that I'm trying to get started with a nice ROM from the get go, and things are off to a rocky start.

Thanks in advance, Let me know if there's anything I can do to help get this figured out. (and I'll try to keep up... I know just enough to be dangerous)

-Trayson

p.s. I'll be happy to donate a little if we can get my phone up and running. :)

Originally Posted by Spongerdude7 (Post 1095813)

In the video he said the links will not work with the touch pro. What programs do i use for the TP?

Originally Posted by pjtwist2002 (Post 1097008)

I am sorry again guys i have not be on to assist i have just spoken to many new users wanting the step by step walk through but due to my new location and job i do not have as much time as i did before so for the step by step requires and donation for my time before i do the step by step process thank you so much for your support inn this thread and everything

Originally Posted by pjtwist2002 (Post 1099012)

o thats fine there is no requirement on how much any amount i mean just be resonable lol 10 cents is gonna be like a slap in the face lol but yea just let me know when you would like to

Originally Posted by tonymontana2367 (Post 1099758)

Thanks so much for your help. Donation coming. ok, so I flashed to MightyROM 6.5 Incredible. So to flash from Mighty to say...Energy or w/e do I need to follow the same steps again? If not, which are omitted?

Originally Posted by thecushion77 (Post 1099943)

So just PM you when Im ready so I dont clutter this thread? No I would never just donate 10 cents. More like a double figure dollar amount. You guys/ladies on this site are GREAT!!! Thanks!!!!!!!!!!!

Originally Posted by Urufu_Shinjiro (Post 1117536)

Great guide, as soon as my altell TP arrives I'll flash it with mighty rom. After I unlock and then flash, what are the followup things I need to do, do I need to reinstall the sms and mms like I read in another thread? What about those carrier specific cabs to get data working, will I need to install that? Also will I need to call that number to reactivate my phone?

Originally Posted by jsdeguzman1029 (Post 1117735)

Hello, as you can see, I'm a brand new member, I joined specifically for this thread. I have an HTC Touch PRO from Sprint, it's running Windows Mobile 6.1 Professional and has the stock version of TouchFLO 3D. I have been searching for weeks on the Internet trying to find a way to upgrade my phone. I've been seeing on the web that HTC is really cranking out new phones and new versions of its TouchFLO 3D interface. Looking at the screen shots and videos, I'd really like to upgrade the version on my Touch PRO. Also, I see that windows has come out with mobile 6.5. Basically, these upgrades and new versions came out like three weeks after I bought my phone and I'm going through a not having the newest, coolest withdrawal phase. I don't know all that much about the inner workings of these phones but from poking around on the web it would appear that I need to "flash" a new "ROM" for my phone. I watched the first of your videos and I'm just trying to make sure I know what I'm getting into. It all comes down to these basic questions, if you could help me in answering them that would be great, if not, it's not the end of the world.

1.) Is flashing a new ROM going to get me windows mobile 6.5?
2.) Is flashing a new ROM going to get me TouchFLO 3D 2.0 or 2.5?
3.) Is it true that a flashed ROM also includes all kinds of programs and apps that the developers cooked into it?
4.) If I do this, what is a good way of backing up all the data on my phone, I tried using DashWire from the very beginning but last week I had to do a hard reset and now DashWire won't put anything except my contacts back onto my phone, not my photos, videos, call history or texts. Any good alternatives?

Again, thank you for your time, I know it's a lot of questions and I know everyone on this forum seems pretty well versed in the manipulation of these devices, any time spent on the "New Guy" would be greatly appreciated.

Originally Posted by SkidBox2 (Post 1118098)

My question:
I have MightyRom6.5 file on my desktop.
After I have unlocked (and verified) the phone, do I...

Just double click the MightyROM file on the desktop (with the phone connected via ActiveSync) and follow the instructions that will appear there after?

I appreciate all the time pjTwist and razor have devoted to this very helpful thread.

Thanks,
Skid