Originally Posted by cornelious2 (Post 836832)

Yea im sure i've listed that I use an 8gb micro sd card myself some ware in the thread.

Originally Posted by cornelious2 (Post 775759)

I had problems syncing with vista, and I figured out how to unlock via the sd card a while back. It seems that this might be useful for others so I am posting a thread to make it more easily searchable. This assumes you already know the basics of flashing. if I get enough demand ill break it down further.

This guide is only for the sprint touch pro, you break anything its not my fault you do it at your own risk!!! to make it verizonable you need to get the nbh outta the verizon unlocker.
MAKE SURE YOU THANK CMONEX IN THE Hard-SPL THREAD!!

All of this stuff is in the unlocker thread, I just linked to the sspl, and extracted the nbh for ease of use. Remember your sd card must be formatted fat 32 prior to all this fun stuff.

download the SSPL here http://forum.ppcgeeks.com/attachment...1&d=1225521707
extract this and put the exe in main memory on your phone. (meaning the SSPL should not be on your SD card.)

then download the attached zipped up nbh. Extract it then transfer it to your sd card (not in any folders just on the root of the sd card.) You should have no problems just downloading this with your phone from the site. It says RUU_Signed.zip, but inside the zip it is already named properly so don't rename it after unzipping it.

click on the exe you put on your phone to open up the sspl then it should prompt you to push power to flash. Once the flash is done you are unlocked. You can verify by holding power and vol down while pressing soft reset. It should say cmonex if you unlocked properly.

NOTE: some users have reported getting stuck in an unbootable loop after this step. simply flash this copy of the stock rom and you should be good to go. if this note helps you please sent hotspace some thanks for figuring this out ftp://ppcgeeks.com/Raphael/Users/ImC...RUU_dumped.rar

Originally Posted by ebuechler3 (Post 839949)

my 2gb sd card has been formatted to fat 32 and im stuck on bootloader screen. it also says "upgrade rom code error. please try again" pleeeeeeeease help

Originally Posted by ebuechler3 (Post 839971)

it says RAPH800 spl 0.37.CMONEX microp herman led v0c85 etc... then " upgrade rom code error, please try again" what should i do now?

Originally Posted by razorloves (Post 840026)

There is a NOTE near the end of the first post in this thread that pertains to you. Follow those steps, except don't use the sprint rom, use this one http://www.mediafire.com/file/04jntj...39959_Ship.exe
You will have to use winrar or similar to to extract the RUU_signed.nbh file from the exe file above.
People have had the same error as you and this is the documented fix for it. It will flash your OS rom and clear that error.

Originally Posted by cornelious2 (Post 840047)

I honestly think at this point any unlocked rom will get you out of the loop. I am not sure what causes this error, but flashing any rom at this point seems to get you out.

Originally Posted by razorloves (Post 840092)

Good point cornelious. I was just relaying the instructions from the first post. He will be fine if he just uses the nbh from the shipped rom. It will only have a possibility of relocking if he ran the exe file while connected through activesync.