+Feb 5+ *SSK 1.2 Stable* {CE OS 21109} Kitchen and ROM

[barryregan]

Originally Posted by FormerPalmOS

Pagepool size shouldn't affect boot time - the pagepool is used as needed. Setting it to zero means unlimited - Windows gets as much as it needs. Unless you run out of memory, this will be the fastest solution. I think you have the Sprint phone, so you get 64MB more memory than VZW (32K real, 32K less reserved for radio stack). I'd stick with zero until you run low on memory. Then try 32MB.

I am a NOOB and am curious as to why we wouldn't simply set the pagepool to 0 or dynamic if this allows the os to use as much memory as it needs.

[ka911]

Dear Scott,
thanks for 1.5 b2, how ever the weather DB is broke, I can't get WA state Cities. is there any plan of fixing this issue?

[phattooth]

Originally Posted by barryregan

I am a NOOB and am curious as to why we wouldn't simply set the pagepool to 0 or dynamic if this allows the os to use as much memory as it needs.

Do you have a Sprint phone or Verizon phone?

If Sprint... go right ahead.
If Verizon... we dont have the same amount of physical memory that the sprint phones do, and a PP of 0 can lead to memory utilization issues.

[TwoDawgs]

Originally Posted by ka911

Dear Scott,
thanks for 1.5 b2, how ever the weather DB is broke, I can't get WA state Cities. is there any plan of fixing this issue?

This has been an ongoing issue with the DB he uses. I think I read somewhere about a fix over on XDA.

[upparoom]

Originally Posted by oldman

in HTC Tool, do the satellites show as Locked

Google settings should be for Manual settings/Com4/4800 Baud
Then in the Main menu, clic on "USE GPS)

yes it shows locked.

if I use manual settings, google maps says "initializing GPS" for about 2 minutes, then the software says "could not communicate with GPS"

or something similar

[oldman]

Originally Posted by upparoom

yes it shows locked.

if I use manual settings, google maps says "initializing GPS" for about 2 minutes, then the software says "could not communicate with GPS"

or something similar

soft reset, turn off TF3D and try again,,,,see if that works

[joem1211]

Originally Posted by oldman

lUnder Function, did you set the chip to 7500, and open Port

Boy, this is strange. I'm only showing 1 sat, and I always lock quickly with at least 6. I"m running 1.2, not the Beta, so I should be good. I've use GPS many times before tonite with no problems

I started test:

Chp Type Q7500
Com port Com 4
loop 1 time 60.0
$GPRMC,,V,,,,,,,,*31
$GPGLL,,,,,,A*11
SGPGSA,A,1,,,,,,,,,50.00,50,00,50,00*35
$gpgsv,1,1,00*79
GPGGA,,,,0,,,,,,*66

[oldman]

Originally Posted by TwoDawgs

This has been an ongoing issue with the DB he uses. I think I read somewhere about a fix over on XDA.

Try weather Master 1.03b2 I've attached the file a couple of different times in this thread and dont want toduplicate too many times
http://forum.xda-developers.com/showthread.php?t=475111
Bob

[scrosler]

Originally Posted by joem1211

I started test:

Chp Type Q7500
Com port Com 4
loop 1 time 60.0
$GPRMC,,V,,,,,,,,*31
$GPGLL,,,,,,A*11
SGPGSA,A,1,,,,,,,,,50.00,50,00,50,00*35
$gpgsv,1,1,00*79
GPGGA,,,,0,,,,,,*66

DId you apply the GPS crack? What phone are you running?

[scrosler]

Originally Posted by ka911

Dear Scott,
thanks for 1.5 b2, how ever the weather DB is broke, I can't get WA state Cities. is there any plan of fixing this issue?

I'll try to dig up a new wethear database tonight. If anyone has a direct link with working WA state let me know.