[ Discontinued ][ v4.2 ][ 6.5.x / 6.5 / 6.1 ] Calkulin's Visual VGA Kitchen & ROMs

[jucytec]

Originally Posted by TMartin

Well try it without running anything extra.....if it works then start adding things one by one.

Alright...

Removing all UC did work... I still do have the 3mm offset on every tab. right below the Notification bar I have a GAP that pushes the manila down 3mm, and the bottom tab icons are cut off.

Are you planning on making one with 28008 built in?

[gorocket1981]

Originally Posted by TMartin

Here's the Link

Thanks. I'll try it tonight. I understand that it already contains the latest Manila 2.5 available. If I want to have build 28008 available in this kitchen, how should I proceed?

Thanks

[TMartin]

Originally Posted by jucytec

Alright...

Removing all UC did work... I still do have the 3mm offset on every tab. right below the Notification bar I have a GAP that pushes the manila down 3mm, and the bottom tab icons are cut off.

Are you planning on making one with 28008 built in?

No....to be honest, the only thing I build with is COM2. I know there is a Manila Position fix EXT but I'm not sure where to download it.

[jucytec]

Originally Posted by TMartin

No....to be honest, the only thing I build with is COM2. I know there is a Manila Position fix EXT but I'm not sure where to download it.

ah ha..

whats the best COM2 now?

[TMartin]

Originally Posted by jucytec

ah ha..

whats the best COM2 now?

I've been stuck on 21876 for awhile now.

[TMartin]

Originally Posted by gorocket1981

Thanks. I'll try it tonight. I understand that it already contains the latest Manila 2.5 available. If I want to have build 28008 available in this kitchen, how should I proceed?

Thanks

Here is something for VK setup for diamond

http://forum.ppcgeeks.com/showpost.p...postcount=9104

so its recmodded.

[omahajs]

Originally Posted by DigitalAttic

Most TPs other than Verizon have the memory to allow dynamic PP: set PP = 0

For Verizon, the sweet-spot can be between 6 - 12MB, and usually its 8-10MB; this tends to be both hardware and software dependent, and thus you need to experiment with your phone as you have it configured for daily use.

Does the page pool changer even work on these newer 6.5.x builds with Calk's 4.2 Kitchen? Each time I build a rom the pp always shows up as 6, I can change it to 10, but is it really changing? If not, how can I change the pp?

I only ask because I've tried 3-4 of the newer sys and each time my device is out of memory when left charging overnight - is my pp actually set to 0 causing all of my vzw memory to be used overnight?

Thanks.

[ahuskins]

Originally Posted by omahajs

Does the page pool changer even work on these newer 6.5.x builds with Calk's 4.2 Kitchen? Each time I build a rom the pp always shows up as 6, I can change it to 10, but is it really changing? If not, how can I change the pp?

I only ask because I've tried 3-4 of the newer sys and each time my device is out of memory when left charging overnight - is my pp actually set to 0 causing all of my vzw memory to be used overnight?

Thanks.

Click on "Other" in the kitchen below "Create ROM" slider comes out and you input the desired PP there.

BTW anyone have an Album 3.2 EXT ?

[shad0w77]

Originally Posted by omahajs

Does the page pool changer even work on these newer 6.5.x builds with Calk's 4.2 Kitchen? Each time I build a rom the pp always shows up as 6, I can change it to 10, but is it really changing? If not, how can I change the pp?

I only ask because I've tried 3-4 of the newer sys and each time my device is out of memory when left charging overnight - is my pp actually set to 0 causing all of my vzw memory to be used overnight?

Thanks.

when you build the rom in the kitchen, the PP changer app pops up, allowing to change the PP. Just make sure it is pointing to the right NBH. It stores the location of the last NBH you changed the PP of, not the newest NBH you just built.

[welrope]

Originally Posted by TMartin

No....to be honest, the only thing I build with is COM2. I know there is a Manila Position fix EXT but I'm not sure where to download it.

the showcase position fix is in calks kitchen. but it doesn't work for other apps. I would recommend using this instead. It works wonderfully, and works with other apps like garmin etc... its already in ext package so just drop it in and cook!