I TAKE NO RESPONSIBILITY FOR ANYTHING YOU CHOOSE TO DO TO YOUR DEVICE. YOUR PHONE, YOUR CHOICE, YOU BREAK IT, YOUR FAULT.

USE AT YOUR OWN RISK


Big Thanks goes to Tobey, JD, Juicy, Juggalo_X Calcu Ghettofreeryder and Ivan without there help this would not exsist.

This is for a Touch Pro, it should work with other carriers, but it is designed for Alltel. This is for the most part a Stock ROM, leaving all the customization to you. I have tested this and it seems to be very fast for me.

It is always a good idea to hard reset after you flash to a new build it helps everything run smoother.

This is based off the HTC MAX system. 20759. I have found this to be the most stable and fastest system out there for me.

This is a full kernal xip port, xip is also fully customized to help give you the maximum amount of free space. with ULDR removed. nk.exe moved to a higher address to help speed up the boot time. I have converted most of the programs to modules to help with memory, speed and paging speeds. So everything should be very fast here.

Pagepool changer works on all of these roms. So if you would like to use that, then open the download file with winrar and extract the RUU_Signed.nbh and the Pagepool changer inside the downloaded file. and use it from there.


http://conflipper.com/ppcgeekspics/Screen01.jpghttp://conflipper.com/ppcgeekspics/Screen02.jpghttp://conflipper.com/ppcgeekspics/Screen03.jpghttp://conflipper.com/ppcgeekspics/Screen04.jpg


Directions

1. Unlock your phone Using directions posted at this site.

2. Download and Flash this ROM file

3. After your phone has started up, it is recommended to do a hard reset, it helps everything run better, but if you dont want to, it is not required.

4. Let the customizer run, and Enjoy your new ROM.


Big thanks goes out to site owns of PPCGEEKS, and XDA-Developers, They made this happen. Thanks to GhettoFreeRyder, and TobeyChris for everything, Thanks to Calcu for his sys base. Juggalo_X for his LED notification. Thanks to No2Chem for everything he does, his programs. JD for all of his help. Thanks to the Users of this site, that also makes everything happen.

Originally Posted by rjmjr69 (Post 656985) Working directions to setup Internet Share for Sprint users HKEY_LOCAL_MACHINE\Comm\InternetSharing\Settings Delete "ForceCellConnection", or (if you're nervous) just change the title. I made mine "OldForceCellConnection" MaxCMConnectRetries should be set to "0" ALSO: HKEY_LOCAL_MACHINE\Comm\InternetSharing There should be NO KEYS at all in this folder. I think that Sprint puts something else in here to mess you up, Now, perform a soft reset on the device. Once you reload, open up the web browser or update the weather or do SOMETHING so that your device shows that it is connected to your carrier. Once you are, load up the Internet Sharing app, and you'll see a new drop-down menu. You'll want to select your carrier's data connection and NOT "Phone as Modem". Once you have, click "connect" It should say "Check USB Cable Connection". Plug in your USB to your computer / phone. It'll take a little while (up to a minute the first time) for Windows to recognize the device as a WinMo Internet connection. Once it does, the status message on your system will switch to "Waiting for network". Mine sat here for almost another full minute. Then it says "Connected".