Originally Posted by deadz (Post 500048)

I updated to the Raphael_CDMA_HSPL_037 to unlock. Then tried flashing both ways described above. When I try the way JD recommended, I get a 0% on both my HTCTP and my computer, but it never goes any further and eventually errors out and my device resets to normal. When I try the SD card way I see the rainbow colored screen. Something flashes just for a brief second like no image found, but its so quick, I can't tell for sure if thats what it says and then just sits on the rainbow colored boot loader screen until i do a soft reset. My storage card does indeed have JD's image renamed just as mentioned above in the root directory of the SD card. Any ideas? Since flashing the Raphael_CDMA_HSPL_037 I have not done a hard reset, is that neccessary to make all this work?? Thanks,

Originally Posted by jakdillard (Post 500869)

can this tread be stickied

Originally Posted by wowthatisrandom (Post 500925)

post 1 and 2 combined and stickied for now.. thanks

Originally Posted by deviant.ones (Post 500244)

even better, wife with no bottom sittin on your lap while you flash. Don't matter what goes wrong you won't get mad :-D

Originally Posted by wowthatisrandom (Post 500856)

which ROM are you trying to flash? and did you double check like cmonex explained to make make sure that the HSPL actually worked on your phone by manually booting into bootloader?

Originally Posted by jakdillard (Post 498488)

NOTE -- PLEASE MAKE SURE YOU UNLOCK YOUR PHONE BEFORE FLASHING TO A CUSTOM ROM!
USE THIS THREAD TO UNLOCK --wow


Flash from microSD Card (Thanks to MadlyAlive):

1. Make sure you backup anything that is necessary to your day to day operations! At a minimum, please perform an ActiveSync to Outlook or your Exchange server prior to flashing!
2. Rename the custom ROM NBH file from RUU_Signed.nbh to RAPHIMG.nbh
3. Copy RAPHIMG.nbh to the root of your microSD Card.
4. Hold the Volume Down and Power button simultaneously. While you're still holding those 2 buttons, press the reset button with your stylus.
5. When your Touch Pro tells you to do so, press the power button to begin the flash process. If you do not get the message to press the power button to flash, there is a mistake in the name of the NBH file or you do not have the file at the root of your microSD card.
6. When flashing is complete, perform a soft reset.

Originally Posted by ez2bgman (Post 501082)

I tried both methods to flash n2c's ROM on my TP but I have had no luck. I prefer using the memory card method. I unlocked the phone. I renamed the file as mentioned above and then copied the file to c:\Mobile Device\Storage Card. I entered bootloader mode and waited, and waited, and waited. Nothing happened. I never saw a prompt to hit the power button.

What am I doing wrong?

Here's a pic of the file name/location:

Thanks