Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Anyone found a solution to this yet, I would really like to get this ROM off my phone...

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Just flash a new ROM from bootloader

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Hey how do you enter the bootloader and how do you flash by bootloader, i have tired using a bootloader from a ruu but it won't run...

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Here's what I did:

1. Installed the Widcomm bluetooth driver on my pc: http://www.broadcom.com/support/bluetooth/update.php

2. Connected my USB-less phone to my PC via bluetooth

3. Transferred my stock rom, renamed to DIAMIMG.nbh to the root of Internal Storage

4. Held "Power+VolumeDown+Back" and pressed and held the reset button with my stylus.

5. It entered the bootloader and I had to press the power button to get it to flash after that. Worked like a charm. Stock ROM installed, USB came back.

jakewill

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

you can enter the BootLoader at any time by pressing Power+VolumeDown and holding down Reset until it appears.

Then just plug your phone in and flash as normal, ActiveSync dosent need to recognize it

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Rileyd5 & Maxxed

first off, youre both in this cause i dont know how to multi quote. but thanks so much for helpin me out with this. Mach 5 works great, do you know how long the trial lasts for?

also, has anyone found a fix for the sync problems yet?

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

No fix yet for the ActiveSync problem.
Iv not heard of anyones trial on the mach 5 browser running out yet.

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

thanks yearn

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Thanks Yearn...

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

couple questions before i go to work, ive seen the word tf3d2 flying around this site. is that what MR5 has? will a touch flo config work with this rom?

also, on the home screen, pictures tab, all that show up are the avatars and other pre loaded stuff, anyway to set int storage to show up in that tab?

last, can you change tabs?


any help is much appreciated


NOTE - Mighty, your roms are AMAZING. this last 6.9.09 update for diamond is probably the best rom you've created yet. keep up the good work.

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Just a note on the Bootloader... you can get to it easier buy just pulling your battery. Once it out for a few seconds press and hold the <---(back arrow btn) while pressing volume down and then press and hold the pwr button until you get the rainbow screen. No need to hit the hand cramping reset. At the bottom of the the screen it will say "serial" plug in your usb cord and then flash using the normal procedure.

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

MR5 uses Titanium, which is the Windows Mobile 6.5 interface. I dont' believe there's any TF3D or TF3D2. I prefer SPB Mobile 3 over all of them and it seems to work well with any of the ROMS I burn.

I dont' know on this, it's why I don't use Titanium, it requires a heavy amount of customization that is only doable with 3rd party tools or registry editing.

There are no "tabs", because there's no TF3D. I would guess you could try and install TF3D. But if you REALLY want TF3D I recommend Mighty ROM 4. I would not recommend any Rhodium (TF3D2) ROMS, they have too many bugs that make the interface unusable.

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Not to disagree, but MR5 does have tf3d. It's the standard tf3d, not tf3d2. You can select titanium or tf3d in the Settings>Today>Items>Windows default(titanium), or Tf3d(lower on the list). You can probably use tf3d configurator to make changes as well. Regarding pictures, you just need to find out where the pictures are saved that and move your pictures to this folder or change the path. Regarding customizing titanium. chome editor(install this via cab) or titanium customizer are user friendly allowing you to select/deselect panels, reorder them, etc. There's a bit of a learning curve since 6.5 is new. It's just your preference in the end whether you like it or not.

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

A couple of months ago, before Mighty Mike was willing to take donations, I found a creative way to "re-pay" him for all his hard work. I purchased a domain for his use. At the time, though, he was not ready to do anything with it, so it has been sitting idle. Today, that's changed and the site is live, thanks to LilRico's hosting. It will be a work in progress, but check it out and please spread the word... http://www.MightyRom.com.
Pete

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

No problem, I appreciate the correction.

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Right on man! Nice contribution!

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

any chance of the next version having the newer tf3d from the diamond 2? that one is called the rhodium i think.

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Pretty doubtfull, Mikes pretty picky and Xboxmods Rhodium port still has several bugs

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Can anybody report on how much free space you will have left if you install Rhodium / Topaz manila?

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Rileyd5 & marcjen

thanks for the input on tf3d and titanium, i will try messin around with the chrome editor.
as far as pics go i wanted to find a way to keep them in the internal storage to save space on main mem, but the pictures "tab" for lack of a better term, pulls the pictures from the main memory, im just guessing this because its the avatars and what not.

Rileyd5 can you post the chrome editor cab?

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

last week i tried some 6.5 roms and it totally messed my phone up until i loaded up the sprint stock rom again and it settled down. Is there any steps i can take to make sure that this will work fine on my phone? OR is anyone having this issue as well?

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Here is the cabs for chome editor and titanium weather 4.2 in case anyone is interested. I would turn off titanium first before installing. start>settings>today>items>uncheck windows default. check out this thread, post 22 for more info on titanium weather and radar setup as well as chome editor info.

http://forum.ppcgeeks.com/showthread.php?t=67769&page=3

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

rileyd5, thanks for all your help(I would give you a gold star if there was one. you've helped me before on other topics and your solutions have worked wonders. thanks again man

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

could the .nbh file be posted im on the road and have no computer to flash from :( but im dying to give it a try

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

hey rileyd5

im opened up the chome editor and im not too familiar with reg edits, where can i learn about this?

Post 22 of this thread doesnt have what you spoke of.

and if i turn off titanium to load the weather cab will it mess anything up switching from titanium to tf3d? or is that what it switches to when you turn titanium off?

i dont want to mess anything up now that i have 6.5 running smooth

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Yep same problem here. No sync'ing. Reflashed the rom twice, no go. It's too bad, this looked to be a very stable WM 6.5...I need sync though.

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

If you have bluetooth on your computer, you can sync your phone via bluetooth. That's what I did, and it works very well :) A temporary fix until the USB sync'ing is fixed.

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Hello, I have been searching but I could not any info. I know that there is a way to get the same background image on all tabs but is there a way to have a different background for each tab?

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

in that post, it describes how to remove panels or add panels. But it's very simple. the left side of the panel allows you to rearrange the titanium panels, the right side allows you to remove panels or add them. Here is a pic of the interface. There are no reg edits. Turning off titanium does nothing other than allowing you to add the t weather panel without interference, it's good to close something if you adding functionality to it. But it will not effect tf3d at all. I would suggest going to showaco threads to learn more about t weather as well since I am by no means the expert. I chuck it on and rearrange a couple panels, remove a couple, done:)

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Well it recommended that before you flash any rom to your phone that you flash the stcok rom and perform a hard reset; so to answer your question that is the steps that you should take before each and every flash. i had that issue before but like you i had to learn the hard way

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Is anyone having problems with their phone being recongized my thier host pc? I tried unclicking and reclicking the enable faster sync" but when i close it to save the setting it doent change. Nor when i connect to my cpu does the screen come up for me to choose my connection. Are there any troubleshooting tip anyone can offer me?

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

almost everyones havin trouble with this, Im sure mighty is working on getting it sorted out

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

looks like i'm gonna be all over this when the activesync gets fixed. i've been waiting for a stable 6.5 rom FOREVER.

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Since Juicy is doing it, I might as well pitch in :)

Who's Your Favorite Chef?

http://forum.ppcgeeks.com/showthread.php?t=71427

Show your support ;)

Lets take 1st!

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

RIleyd5
hey sorry about that, i thought i was in the right thread when i was looking, but i found what you were talking about with post 22.

and now its time for something completely different. I know everyone has been having trouble with the pop ups during a call. (i havent seen a fix for this yet? anyone else?) But im also getting a pop up everytime my phone dials for data. does anyone other than me have this problem?

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

just got my lil bro a diamond wanted to put mighty rom 5 like my touch pro has but i am reading that the diamond cant sync..... is this on all diamonds or just on a few?

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

Apparently a few. You should be able to get it on there.

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

i flashed him on mighty rom 4 he is liking it, loving the fm radio..... i want him to use mighty rom 5 like i have on my touch pro.. but i guess i will wait because he has alot of info and numbers that need to be synced

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

im pretty sure that all diamonds have the built in 4g mem card. if this is true he can download ppcPimBackup. I have been using it as long as i have been flashing. then you can flash from the 4g memory as described in the thread
http://forum.ppcgeeks.com/showthread.php?t=40490

the cab for pim backup can probably be found by using the search method in the MR4 forum.

Re: [ ROM ] [ CDMA ] [ VICTOR ] [ 06.09.09 ] [ Windows® Build 21731 ] MightyROM5
 

sounds good but will have to wait for active sync to be fixed I really use that alot....